Hot-Rolled D2 Tool Steel Sheet 400mm Wide
> Flat-rolled D2 tool steel sheet, hot-rolled with no further surface treatment, measuring 400 mm in width and under 600 mm overall. This product, with over 1.2% carbon and over 10.5% chromium, is classified under tariff item 7226.91.00 as other alloy steel, not further worked than hot-rolled.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is further processed, such as cold-rolled or annealed
This item covers flat-rolled alloy steel products that have been worked beyond hot-rolling.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• > Confirm the sheet's width is under 600 mm and that it is not further worked
• Provide a mill test certificate to verify the high carbon and chromium content
• Ensure the product is not classified as stainless steel
Related Products under Tariff item 7226.91.00
100Cr6 Hot-Rolled Ball-Bearing Steel Strip
> European 100Cr6 grade hot-rolled steel strip for ball-bearing production, precisely matching the definition of other alloy steel with controlled carbon (0.95-1.13%), chromium (1.25-1.65%), and low non-metallics. 320 mm wide, 2.5 mm thick, not further worked than hot-rolled, this falls under tariff item 7226.91.00.
52100 High-Carbon Hot-Rolled Bearing Steel Plate
> ASTM A485 Grade 52100 hot-rolled plate for demanding bearing applications, 450 mm wide, 5 mm thick, with ball-bearing steel chemistry including 1.05% carbon and 1.45% Cr. This flat-rolled product of other alloy steel, under 600 mm width and not further worked than hot-rolled, is classified under tariff item 7226.91.00.
AISI 52100 Hot-Rolled Ball-Bearing Steel Sheet
> Flat-rolled alloy steel sheet made from AISI 52100 grade, specifically formulated for ball-bearing applications with precise carbon (0.95-1.13%), chromium (1.25-1.65%), and low sulfur/phosphorus content. Hot-rolled and not further worked, this sheet falls under tariff item 7226.91.00.
Chipper Knife Steel Hot-Rolled Sheet 2.5mm x 300mm
> Hot-rolled chipper knife steel sheet measuring 2.5 mm thick by 300 mm wide, alloyed with 0.52% carbon, 8.0% chromium, and 1.4% molybdenum. This flat-rolled product of alloy steel, not further worked than hot-rolled, falls under tariff item 7226.91.00 as it is under 600 mm in width and meets the definition of other alloy steel.
Chipper Knife Steel Hot-Rolled Strip 1.2mm Thick
> Flat-rolled alloy steel strip of 1.2 mm thickness and 150 mm width, hot-rolled and not further worked, specifically formulated as chipper knife steel with 0.5% carbon, 8.5% chromium, and 1.5% molybdenum. This product falls under tariff item 7226.91.00 as it is a flat-rolled product of other alloy steel, under 600 mm in width, and not further worked than hot-rolled.
Custom Chipper Knife Steel Hot-Rolled Band 1.5mm
> Specialty hot-rolled band/sheet of chipper knife steel, 1.5 mm x 200 mm, with exact composition: 0.53% C, 0.4% Mn, 0.9% Si, 8.2% Cr, 1.6% Mo, 0.3% V. This not-further-worked flat-rolled product under 600 mm width qualifies under tariff item 7226.91.00 as other alloy steel, hot-rolled only.