Not further worked than cold-rolled (cold-reduced)
Live horses, asses, mules and hinnies. > Not further worked than cold-rolled (cold-reduced) > Not further worked than cold-rolled (cold-reduced)
Duty Rate (from China)
Products classified under Tariff item 7226.92.00
A2 Cold-Rolled Tool Steel Plate
> A2 tool steel cold-rolled plate, 150 mm wide and 2 mm thick, not in coils. Its composition (1% carbon, 5.25% chromium) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled. The width is less than 300 mm.
A2 Tool Steel Cold-Reduced Strip 350mm Wide
> A2 air-hardening tool steel cold-reduced strip, 350 mm wide and 0.8 mm thick, in annealed condition without additional surface treatments. Its composition (1% carbon, 5% chromium) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
A2 Tool Steel Cold-Rolled Plate 500mm Wide
> A2 air-hardening tool steel in cold-rolled plate form, 500 mm wide and 3 mm thick. This flat-rolled product is not further worked than cold-rolled, and its composition (about 1% carbon, 5% chromium) qualifies it as other alloy tool steel under Chapter 72.
Cold-Reduced 52100 Bearing Tool Steel 310mm Wide
> 52100 chrome alloy tool steel strip, cold-reduced, 310 mm wide and 1 mm thick, intended as a precursor for bearing races. Its carbon and chromium content classify it as other alloy tool steel, and it is presented in the cold-rolled condition only.
Cold-Reduced O1 Tool Steel Strip 350mm Wide
> O1 oil-hardening tool steel flat product, cold-reduced, 350 mm wide and 2 mm thick, used for cutting tools and gauges. The composition (0.9% carbon, 1% manganese) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
Cold-Rolled CPM-M4 Tool Steel 450mm Wide
> CPM-M4 particle metallurgy tool steel, cold-rolled sheet, 450 mm wide and 2.5 mm thick, for high-wear applications like blanking dies. Its high carbon and chromium content classifies it as other alloy tool steel, and it is not further worked than cold-rolled.
Cold-Rolled D2 Tool Steel Sheet 400mm Wide
> D2 tool steel sheet, cold-rolled, 400 mm wide and 1.5 mm thick, used for precision dies and punches. The high carbon (1.5%) and chromium (12%) content qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
CPM-M4 Tool Steel Cold-Rolled Strip 320mm Wide
> CPM-M4 powder metallurgy tool steel cold-rolled strip, 320 mm wide and 0.6 mm thick, uncoated. Its composition (1.4% carbon, 4% chromium, 4% vanadium, 5% molybdenum) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
H13 Tool Steel Cold-Rolled Plate 380mm Wide
> H13 hot-work tool steel cold-rolled plate, 380 mm wide and 4 mm thick, for die casting molds. Its composition (0.32-0.45% carbon, 5% chromium) qualifies it as other alloy tool steel, and it is presented in the cold-rolled condition only.
H13 Tool Steel Cold-Rolled Plate 500mm Wide
> H13 hot-work tool steel cold-rolled plate, 500 mm wide and 3 mm thick, for die casting molds, with no additional treatments. Its composition (0.4% carbon, 5% chromium, 1.3% molybdenum, 1% vanadium) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
L6 Tool Steel Cold-Reduced Sheet 420mm Wide
> L6 shock-resisting tool steel cold-rolled sheet, 420 mm wide and 1 mm thick, supplied with mill finish. Its composition (0.7% carbon, 0.75% nickel, 1.5% chromium, 0.5% molybdenum) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
M2-Type Tool Steel Cold Sheet 420mm Wide
> M2-type molybdenum high-speed tool steel cold-rolled sheet, 420 mm wide and 1.8 mm thick, for form tools. Despite being a high-speed type, it is classified as other alloy tool steel because it does not meet the high-speed steel definition in Chapter 72 Subheading Note 1(d). It is not further worked than cold-rolled.
O1 Tool Steel Cold-Rolled Plate 450mm Wide
> O1 oil-hardening tool steel cold-rolled plate, 450 mm wide and 2 mm thick, supplied flat without patterns or coatings. Its composition (0.9% carbon, 1% manganese, 1% chromium, 0.5% tungsten) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
S7 Tool Steel Cold-Reduced Sheet 320mm Wide
> S7 shock-resisting tool steel cold-reduced sheet, 320 mm wide and 1.2 mm thick, for impact tools like chisels. Its composition (0.45-0.55% carbon, 3.25% chromium) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.
S7 Tool Steel Cold-Reduced Sheet 380mm Wide
> S7 shock-resistant tool steel cold-rolled sheet, 380 mm wide and 1.5 mm thick, for impact tools, not further worked. Its composition (0.5% carbon, 3.25% chromium, 1.4% molybdenum) qualifies it as other alloy tool steel, and it is not further worked than cold-rolled.