Chipper Knife Steel Hot-Rolled Sheet 2.5mm x 300mm
Hot-rolled chipper knife steel sheet, 2.5 mm thick and 300 mm wide, alloyed with 0.52% carbon, 8.0% chromium, and 1.4% molybdenum. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the width is 600 mm or more
Flat-rolled products of other alloy steel, width 600 mm or more, not further worked than hot-rolled, fall under heading 7225.
If the product is cold-rolled after hot-rolling
Flat-rolled products of other alloy steel, width less than 600 mm, further worked than hot-rolled, are classified under this item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-rolling (e.g
• no pickling, coating, or cold-rolling) to qualify for this tariff item
• Provide a mill certificate showing the alloy composition to confirm classification as other alloy steel
• Verify the width is under 600 mm; if 600 mm or more, a different heading applies
Related Products under Tariff item 7226.91.00
100Cr6 Hot-Rolled Ball-Bearing Steel Strip
European 100Cr6 grade hot-rolled steel strip for ball-bearing production, 320 mm wide and 2.5 mm thick, with controlled carbon (0.95-1.13%) and chromium (1.25-1.65%) content. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
1.2379 Tool Steel Hot-Rolled Strip 380mm Wide
DIN 1.2379 (X153CrMoV12) tool steel hot-rolled strip, 380 mm wide, intended for blanking dies. This is an other alloy steel with high chromium and carbon content, classified as tool steel. The strip has only been hot-rolled with a mill finish and no further working.
52100 High-Carbon Hot-Rolled Bearing Steel Plate
ASTM A485 Grade 52100 hot-rolled plate for demanding bearing applications, 450 mm wide and 5 mm thick, with ball-bearing steel chemistry including 1.05% carbon and 1.45% chromium. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
52100 Hot-Rolled Bearing Quality Steel Slit Coil Stock
Hot-rolled 52100 bearing quality steel slit coil stock, slit to 280 mm width and 4 mm thick, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for bearing production. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
A2 Tool Steel Hot-Rolled Plate 350mm Wide
A2 air-hardening tool steel hot-rolled plate, 350 mm wide, used for shear blades and forming tools. This alloy steel contains chromium in the range of 1.25% to 10.5% and carbon between 0.3% and 1.25%, meeting the definition of tool steel. The plate has not been further worked than hot rolling.
AISI 52100 Hot-Rolled Ball-Bearing Steel Sheet
Flat-rolled alloy steel sheet made from AISI 52100 grade, specifically formulated for ball-bearing applications with precise carbon (0.95-1.13%) and chromium (1.25-1.65%) content. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).