AISI 304 Stainless Steel Sheet 2B Finish
AISI 304 stainless steel sheet with a 2B cold-rolled finish, containing 8-10.5% nickel and 18-20% chromium, in widths exceeding 600 mm and typically 1.5 mm thick. This is a general-purpose austenitic stainless steel widely used in food processing and architectural applications. As a flat-rolled stainless steel product over 600 mm wide, it falls under tariff item 7219.90.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is cold-rolled, with a thickness exceeding 1 mm but less than 3 mm
This subheading covers cold-rolled flat-rolled stainless steel products of a width of 600 mm or more, with a thickness in this range.
If the sheet is cold-rolled, with a thickness of 0.5 mm or more but not exceeding 1 mm
Cold-rolled flat-rolled stainless steel products with a thickness between 0.5 mm and 1 mm are classified under this subheading.
If the width is less than 600 mm
Flat-rolled stainless steel products narrower than 600 mm are classified under heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the sheet's width exceeds 600 mm and that the 2B finish does not constitute further working beyond cold-rolling, which is acceptable
• Provide the CBSA with the chemical composition to verify it meets the stainless steel definition
• Check if the product is subject to any import quotas or requires a permit under Canadian trade laws
Related Products under Tariff item 7219.90.00
17-4 PH Precipitation Hardening Stainless Sheet
17-4 PH is a martensitic precipitation-hardening stainless steel sheet with 3-5% nickel, 15-17.5% chromium, and 4% copper, in the H900 condition, measuring 1.5 mm x 1000 mm. This aerospace-grade material offers high strength and corrosion resistance. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
17-4 PH Stainless Steel Precipitation Hardened Sheet
17-4 PH stainless steel precipitation-hardened sheet in H900 condition, width 750 mm. This martensitic stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled products of stainless steel, width 600 mm or more. Its precipitation-hardening treatment and aerospace use do not exclude it from this heading.
17-4 PH Stainless Steel Sheet
17-4 PH is a precipitation-hardening stainless steel sheet with approximately 4% molybdenum and over 0.5% nickel. It is over 600 mm wide and is used in aerospace and other high-strength applications. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
28-6 Mo Stainless Steel Sheet
28-6 Mo is a super austenitic stainless steel sheet with 3% molybdenum and 0.6% nickel. It is over 600 mm wide and is used in severe chloride service. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
304 Stainless Steel Embossed Decorative Sheet
304 stainless steel sheet with a linen embossed pattern, width 1220 mm. The embossing is a surface working that does not change its classification as a flat-rolled product of stainless steel. It falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm.
304 Stainless Steel Polished Plate
304 stainless steel flat-rolled plate with a polished No.4 finish, width over 600 mm and thickness 3-6 mm. The polishing does not remove it from the flat-rolled products definition. It is classified under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel products of a width exceeding 600 mm.