Other
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.90
17-4 PH Precipitation Hardening Stainless Sheet
17-4 PH is a martensitic precipitation-hardening stainless steel sheet with 3-5% nickel, 15-17.5% chromium, and 4% copper, in the H900 condition, measuring 1.5 mm x 1000 mm. This aerospace-grade material offers high strength and corrosion resistance. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.0017-4 PH Stainless Steel Precipitation Hardened Sheet
17-4 PH stainless steel precipitation-hardened sheet in H900 condition, width 750 mm. This martensitic stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled products of stainless steel, width 600 mm or more. Its precipitation-hardening treatment and aerospace use do not exclude it from this heading.
7219.90.0017-4 PH Stainless Steel Sheet
17-4 PH is a precipitation-hardening stainless steel sheet with approximately 4% molybdenum and over 0.5% nickel. It is over 600 mm wide and is used in aerospace and other high-strength applications. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.0028-6 Mo Stainless Steel Sheet
28-6 Mo is a super austenitic stainless steel sheet with 3% molybdenum and 0.6% nickel. It is over 600 mm wide and is used in severe chloride service. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00304 Stainless Steel Embossed Decorative Sheet
304 stainless steel sheet with a linen embossed pattern, width 1220 mm. The embossing is a surface working that does not change its classification as a flat-rolled product of stainless steel. It falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm.
7219.90.00304 Stainless Steel Polished Plate
304 stainless steel flat-rolled plate with a polished No.4 finish, width over 600 mm and thickness 3-6 mm. The polishing does not remove it from the flat-rolled products definition. It is classified under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel products of a width exceeding 600 mm.
7219.90.00310 Stainless Steel Heat-Resistant Plate
310 stainless steel heat-resistant plate, flat-rolled, width 800 mm, thickness 5 mm, with a standard mill finish. This austenitic stainless steel is designed for high-temperature service and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm.
7219.90.00316L Mod Stainless Steel Coil
316L Mod is a modified 316L stainless steel coil with elevated 2.5% molybdenum and 1.1% nickel. It is over 600 mm wide and is used in offshore oil platforms. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00316L Stainless Steel Annealed Sheet
316L stainless steel sheet, fully annealed and pickled, width 1200 mm, thickness 1.5 mm. This low-carbon austenitic stainless steel sheet is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The annealing and pickling are standard surface treatments that do not alter its classification.
7219.90.00316Ti Stabilized Stainless Plate
316Ti titanium-stabilized stainless plate for welding applications, 4 mm thick, 1000 mm width. This flat-rolled stainless steel product falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The titanium stabilization prevents sensitization in welded structures.
7219.90.00316Ti Stabilized Stainless Steel Sheet
316Ti is a titanium-stabilized stainless steel sheet with 10-14% nickel, measuring 2 mm x 1500 mm, in the annealed condition. The titanium addition prevents sensitization during welding, making it suitable for welded fabrications. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.00317LMN Stainless Steel Sheet
317LMN is a low-carbon molybdenum-enhanced stainless steel sheet with 2.5-3% molybdenum and 1% nickel. It is over 600 mm wide and is suited for the pulp and paper industry. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00321 Stainless Steel Stabilized Sheet
321 stainless steel flat sheet, cold-rolled with bright annealed finish, width 1000 mm. This titanium-stabilized austenitic stainless steel sheet falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The bright annealing is a surface treatment that does not change its classification.
7219.90.00409 Stainless Steel Hot Band Annealed
409 stainless steel hot band, annealed after hot-rolling, width 1500 mm, not in coils. This ferritic stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. It is commonly used for automotive exhaust systems.
7219.90.00430F Stainless Steel Free-Machining Sheet
430F stainless steel free-machining sheet with sulfur addition, width 900 mm. This ferritic stainless steel sheet is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The sulfur addition enhances machinability but does not affect its classification.
7219.90.00430 Stainless Steel Sheet 2B Finish
430 stainless steel sheet with a 2B cold-rolled finish, width exceeding 600 mm, thickness typically between 0.4-3 mm. This ferritic stainless steel sheet is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The 2B finish is a standard cold-rolled surface treatment.
7219.90.00440C Stainless Steel Tool Sheet
440C stainless steel tool sheet, width 650 mm, hardened and polished. This high-carbon martensitic stainless steel sheet is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The hardening and polishing are surface treatments that do not change its classification.
7219.90.00904L Stainless Steel Coil
904L is an austenitic stainless steel coil featuring 4-5% molybdenum and around 1.5% nickel. It is at least 600 mm wide and is commonly used in chemical processing. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00AISI 304 Stainless Steel Sheet 2B Finish
AISI 304 stainless steel sheet with a 2B cold-rolled finish, containing 8-10.5% nickel and 18-20% chromium, in widths exceeding 600 mm and typically 1.5 mm thick. This is a general-purpose austenitic stainless steel widely used in food processing and architectural applications. As a flat-rolled stainless steel product over 600 mm wide, it falls under tariff item 7219.90.00.
7219.90.00AISI 310 Stainless Steel Hot Band
AISI 310 is a high-temperature stainless steel hot band with 20-22% nickel and 24-26% chromium, measuring 4 mm thick x 1500 mm wide, not pickled. This grade offers excellent oxidation resistance at high temperatures, making it suitable for furnace parts. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.00AISI 316L Stainless Steel Plate No.1 Finish
AISI 316L is a low-carbon stainless steel plate with 10-14% nickel and 16-18% chromium, featuring a No.1 finish (scale not fully removed), measuring 6 mm thick x 1500 mm wide. The low carbon content improves weldability, making it ideal for chemical processing equipment. As a flat-rolled stainless steel product over 600 mm wide, it falls under tariff item 7219.90.00.
7219.90.00AISI 321 Stainless Steel Sheet Bright Annealed
AISI 321 is a titanium-stabilized stainless steel sheet with 9-12% nickel and 17-19% chromium, bright annealed, measuring 2 mm x 1200 mm. The titanium stabilization prevents chromium carbide precipitation during welding, making it suitable for welded fabrications. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.00AL-6XN Stainless Sheet
AL-6XN is a super-austenitic stainless steel sheet containing about 24% nickel, which makes it a high-nickel alloy steel. It is flat-rolled, over 600 mm wide, and is used in desalination plants for its resistance to chloride stress corrosion. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00AL-6XN Stainless Steel Plate
AL-6XN is a super-austenitic stainless steel plate containing about 3-4% molybdenum and 1.5% nickel, supplied in widths exceeding 600 mm. Its high molybdenum content gives exceptional resistance to chloride pitting and crevice corrosion, making it suitable for severe chemical and marine environments. As a flat-rolled stainless steel product over 600 mm wide, not further worked than rolled, it falls under tariff item 7219.90.00.
7219.90.00Alloy 20 Cold-Reduced Plate
Alloy 20 is a cold-reduced flat plate of a high-nickel stainless steel, containing about 35% nickel. It is flat-rolled, at least 600 mm wide, and is used for handling sulfuric acid in chemical processing. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00Carpenter 20Cb-3 Plate
Carpenter 20Cb-3 is a cold-rolled plate of a high-nickel alloy steel, containing about 35% nickel. It is flat-rolled, over 600 mm wide, and is used in pharmaceutical equipment due to its resistance to acetic acid. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00Custom 317 Stainless Steel Plate
Custom 317 is a 317-grade stainless steel plate alloyed with approximately 3.5% molybdenum and 1.3% nickel, in widths of 600 mm or more. This composition provides enhanced resistance to sulfuric and phosphoric acid corrosion, making it ideal for flue gas desulfurization systems. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.00Custom 465 Stainless Steel Aerospace Sheet
Custom 465 stainless steel aerospace sheet, aged-hardening martensitic, 0.8 mm thick, 620 mm width. This flat-rolled stainless steel product falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The aging treatment provides high strength for aerospace applications.
7219.90.00Duplex 2205 Stainless Steel Coil Sheet
Duplex 2205 stainless steel coil sheet, slit to 700 mm width, annealed. This duplex stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. It offers superior stress corrosion resistance for oil and gas applications.
7219.90.00Hastelloy C-276 Plate
Hastelloy C-276 is a flat-rolled plate of a high-nickel alloy steel, containing about 57% nickel. It is at least 600 mm wide and is used in chemical processing for its corrosion resistance. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00Hastelloy X Plate
Hastelloy X is a hot-rolled plate of a high-nickel alloy steel, containing about 47% nickel. It is over 600 mm wide and is used in gas turbine components for its high-temperature oxidation resistance. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00High-Strength 301 Stainless Spring Steel
301 stainless steel strip/sheet, high-strength, width 610 mm, temper rolled for springs and clips. This austenitic stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. The temper rolling provides high strength.
7219.90.00Incoloy 800H Flat Sheet
Incoloy 800H is a flat-rolled stainless steel sheet of a high-nickel alloy steel, containing over 30% nickel. It is over 600 mm wide and is used in high-temperature applications. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00Incoloy 825 Sheet
Incoloy 825 is a flat-rolled sheet of a high-nickel alloy steel, containing about 42% nickel. It is at least 600 mm wide and is used in oil and gas downhole service for its excellent pitting resistance. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00Inconel 625 Cold-Rolled Sheet
Inconel 625 is a cold-rolled flat sheet of a high-nickel alloy steel, containing about 58% nickel. It is over 600 mm wide and is used in aerospace and marine applications. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00Inconel 718 Annealed Sheet
Inconel 718 is an annealed flat sheet of a high-nickel precipitation-hardening steel, containing about 52% nickel. It is at least 600 mm wide and is used in jet engines. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
7219.90.00MartenSite XM-24 Stainless Coil
MartenSite XM-24 is a martensitic stainless steel coil with 2.8% molybdenum and 0.8% nickel, in widths exceeding 600 mm. Its martensitic structure provides high strength and hardness, suitable for turbine components. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
7219.90.00Monel 400 Hot-Rolled Strip
Monel 400 is a hot-rolled flat strip of a high-nickel alloy steel, containing about 67% nickel. It is over 600 mm wide and is resistant to seawater corrosion, making it suitable for shipbuilding. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
7219.90.00Nitronic 60 Stainless Steel Sheet
Nitronic 60 stainless steel sheet, high manganese austenitic, flat-rolled 700 mm width, annealed. This galling-resistant stainless steel falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm. It is used for valves and pump components.
7219.90.00XM-29 Stainless Steel Plate
XM-29 is a high-molybdenum austenitic stainless steel plate with approximately 3% molybdenum and 1.2% nickel, in widths of 600 mm or more. Its composition offers excellent resistance to pitting and crevice corrosion in chloride environments, used in pollution control equipment. As a flat-rolled stainless steel product over 600 mm wide, it falls under tariff item 7219.90.00.