MartenSite XM-24 Stainless Coil
MartenSite XM-24 is a martensitic stainless steel coil with 2.8% molybdenum and 0.8% nickel, in widths exceeding 600 mm. Its martensitic structure provides high strength and hardness, suitable for turbine components. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is hot-rolled, in coils, and of a thickness of 4.75 mm or more but not exceeding 10 mm
This subheading covers hot-rolled stainless steel flat products in coils, over 600 mm wide, with a thickness between 4.75 mm and 10 mm.
If the coil is hot-rolled, in coils, and of a thickness of 3 mm or more but less than 4.75 mm
Hot-rolled stainless steel flat products in coils with a thickness in this range are classified under this subheading.
If the coil width is less than 600 mm
Narrower flat-rolled stainless steel products are classified under heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the coil is in coils and not further worked than hot-rolled or cold-rolled, as additional processing may change the tariff classification
• Provide a certificate of analysis showing the molybdenum and nickel content to demonstrate it is stainless steel
• Check if the product is subject to any import restrictions or permits under Canadian trade remedies
Related Products under Tariff item 7219.90.00
17-4 PH Precipitation Hardening Stainless Sheet
17-4 PH is a martensitic precipitation-hardening stainless steel sheet with 3-5% nickel, 15-17.5% chromium, and 4% copper, in the H900 condition, measuring 1.5 mm x 1000 mm. This aerospace-grade material offers high strength and corrosion resistance. As a flat-rolled stainless steel product over 600 mm wide, it is classified under tariff item 7219.90.00.
17-4 PH Stainless Steel Precipitation Hardened Sheet
17-4 PH stainless steel precipitation-hardened sheet in H900 condition, width 750 mm. This martensitic stainless steel is flat-rolled and falls under tariff item 7219.90.00 as 'Other' flat-rolled products of stainless steel, width 600 mm or more. Its precipitation-hardening treatment and aerospace use do not exclude it from this heading.
17-4 PH Stainless Steel Sheet
17-4 PH is a precipitation-hardening stainless steel sheet with approximately 4% molybdenum and over 0.5% nickel. It is over 600 mm wide and is used in aerospace and other high-strength applications. It falls under this tariff item as a flat-rolled product of stainless steel of a width of 600 mm or more, classified as 'other'.
28-6 Mo Stainless Steel Sheet
28-6 Mo is a super austenitic stainless steel sheet with 3% molybdenum and 0.6% nickel. It is over 600 mm wide and is used in severe chloride service. It is classified under this tariff item as a flat-rolled product of stainless steel, width 600 mm or more, not elsewhere specified.
304 Stainless Steel Embossed Decorative Sheet
304 stainless steel sheet with a linen embossed pattern, width 1220 mm. The embossing is a surface working that does not change its classification as a flat-rolled product of stainless steel. It falls under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel of a width exceeding 600 mm.
304 Stainless Steel Polished Plate
304 stainless steel flat-rolled plate with a polished No.4 finish, width over 600 mm and thickness 3-6 mm. The polishing does not remove it from the flat-rolled products definition. It is classified under tariff item 7219.90.00 as 'Other' flat-rolled stainless steel products of a width exceeding 600 mm.