Type 321 Stainless Steel Cold-Rolled Coil 10mm Thick
Type 321 stainless steel cold-rolled coil, 10 mm thick and 1800 mm wide, stabilized with titanium to prevent carbide precipitation during welding. This flat-rolled product is classified under tariff item 7219.31.00 as it is cold-rolled stainless steel of a thickness of 4.75 mm or more, not further worked.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is between 3 mm and 4.75 mm
Cold-rolled stainless steel flat products of a different thickness range fall under a different subheading.
If the product has been further worked, such as polished or coated
Further working beyond cold-rolling moves the product to the 'other' subheading for stainless flat-rolled products.
If the width is less than 600 mm
Narrower cold-rolled stainless steel strip is classified in heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is cold-rolled and not further worked beyond that stage; any additional processing may change classification
• Provide a mill test certificate to confirm the 321 grade and dimensions
• Verify the thickness is at least 4.75 mm to qualify for this tariff item
Related Products under Tariff item 7219.31.00
17-4 PH Precipitation Hardening Stainless Coil 7mm Thick
A precipitation-hardening stainless steel coil, 7 mm thick and 1000 mm wide, cold-rolled and not further worked. Its composition meets the stainless steel definition, and its dimensions qualify it as a flat-rolled product of heading 7219, supplied in coil form.
17-4 PH Precipitation Hardening Stainless Steel Plate 10mm
A precipitation-hardening stainless steel plate, 10 mm thick and over 600 mm wide, cold-rolled and not further worked. Its composition meets the definition of stainless steel under Chapter 72, and its dimensions qualify it as a flat-rolled product of heading 7219.
AL-6XN Cold-Rolled Stainless Steel Plate 9mm Thick
A super-austenitic stainless steel plate, 9 mm thick and over 600 mm wide, cold-rolled and not further worked. The alloy's high nickel and molybdenum content classifies it as stainless steel, and its dimensions place it in the flat-rolled products of heading 7219.
Cold-Rolled 304 Stainless Steel Sheet 5mm Thick
Flat-rolled 304 stainless steel sheet, cold-reduced to 5 mm thickness with a width over 600 mm, delivered as cut-to-size sheets not in coils. This product is classified under tariff item 7219.31.00 as it is cold-rolled stainless steel of a thickness of 4.75 mm or more, not further worked.
Cold-Rolled 310 Stainless Steel Plate 7mm Thick
High-temperature 310 stainless steel flat product, cold-rolled to 7 mm thickness with a width of 600 mm or more, not coiled. Used in furnace parts and heat exchangers, this product is classified under tariff item 7219.31.00 as it is cold-rolled stainless steel of a thickness of 4.75 mm or more, not further worked.
Cold-Rolled 316L Stainless Steel Plate 6mm Thick
Flat-rolled stainless steel plate made from 316L alloy, cold-rolled to a thickness of 6 mm and width exceeding 600 mm, supplied flat without coiling. This product is classified under tariff item 7219.31.00 as it is cold-rolled stainless steel of a thickness of 4.75 mm or more, not further worked.