Of a thickness of 4.75 mm or more
Live horses, asses, mules and hinnies. > Of a thickness of 4.75 mm or more > Of a thickness of 4.75 mm or more
Duty Rate (from China)
Products classified under Tariff item 7219.31.00.00
17-4 PH Precipitation Hardening Stainless Coil 7mm Thick
A precipitation-hardening stainless steel coil, cold-rolled to 7 mm thickness and 1000 mm width, for aerospace structural components. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.0017-4 PH Precipitation Hardening Stainless Steel Plate 10mm
A precipitation-hardening stainless steel plate, cold-rolled to a thickness of 10 mm and a width exceeding 600 mm, with no further working beyond cold reduction. It meets the definition of a flat-rolled product of stainless steel under heading 72.19, specifically falling under tariff item 7219.31.00 for thickness of 4.75 mm or more.
7219.31.00AL-6XN Cold-Rolled Stainless Steel Plate 9mm Thick
A super-austenitic stainless steel plate, cold-rolled to a thickness of 9 mm and a width exceeding 600 mm, with no additional surface treatment. It qualifies as a flat-rolled product of stainless steel under heading 72.19, and its thickness places it under tariff item 7219.31.00.
7219.31.00Duplex 2205 Cold-Rolled Stainless Steel Plate 8mm Thick
A duplex stainless steel plate, cold-rolled to 8 mm thickness and a width over 600 mm, without further working. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more qualifies it for tariff item 7219.31.00.
7219.31.00Duplex 2205 Stainless Steel Cold-Rolled Coil 8mm Thick
A duplex stainless steel coil, cold-rolled to 8 mm thickness and 1500 mm width, used in oil and gas platforms. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more qualifies it for tariff item 7219.31.00.
7219.31.00Nitronic 60 Cold-Rolled Stainless Plate 6.5mm Thick
A high-manganese stainless steel plate, cold-rolled to 6.5 mm thickness and a wide format, with no further processing. It meets the definition of a flat-rolled stainless steel product under heading 72.19, and its thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.00Type 304 Cold-Rolled Stainless Steel Plate 6mm Thick
A flat-rolled stainless steel plate of Type 304 alloy, cold-rolled to 6 mm thickness and a width exceeding 600 mm, without any further surface treatments. It falls under heading 72.19 as a flat-rolled product of stainless steel, and the thickness qualifies it for tariff item 7219.31.00.
7219.31.00Type 304 Stainless Steel Cold-Rolled Coil 6mm Thick
A flat-rolled stainless steel coil of Type 304 alloy, cold-rolled to 6 mm thickness and a width exceeding 600 mm, for industrial fabrication. It falls under heading 72.19 as a flat-rolled product of stainless steel, and the thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.00Type 310 Cold-Rolled Stainless Steel Plate 7mm Thick
A high-temperature stainless steel plate of Type 310, cold-rolled to 7 mm thickness and 1500 mm width, with no further working. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more qualifies it for tariff item 7219.31.00.
7219.31.00Type 310 Stainless Steel Cold-Rolled Coil 4.8mm Thick
A high-temperature stainless steel coil of Type 310, cold-rolled to 4.8 mm thickness and 1200 mm width, for furnace and heat exchanger fabrication. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more qualifies it for tariff item 7219.31.00.
7219.31.00Type 316 Cold-Rolled Stainless Steel Sheet 5mm Thick
A cold-rolled flat-rolled product of Type 316 stainless steel, 5 mm thick and over 600 mm wide, used in corrosive environments. It qualifies as a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.00Type 316L Stainless Steel Cold-Rolled Coil 5mm Thick
A cold-rolled stainless steel coil of Type 316L, 5 mm thickness and width over 600 mm, for marine and pharmaceutical applications. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.00Type 321 Cold-Rolled Stainless Steel Sheet 5.5mm Thick
A titanium-stabilized stainless steel sheet of Type 321, cold-rolled to 5.5 mm thickness and 1200 mm width, with no additional working. It is a flat-rolled product of stainless steel under heading 72.19, and its thickness qualifies it for tariff item 7219.31.00.
7219.31.00Type 409 Cold-Rolled Stainless Steel Sheet 4.75mm Thick
A ferritic stainless steel sheet of Type 409, cold-rolled to a minimum thickness of 4.75 mm, for exhaust systems. It meets the definition of a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more places it under tariff item 7219.31.00.
7219.31.00Type 430 Cold-Rolled Stainless Steel Sheet 4.8mm Thick
A ferritic stainless steel sheet of Type 430, cold-reduced to 4.8 mm thickness and 1000 mm width, for automotive and appliance uses. It is a flat-rolled product of stainless steel under heading 72.19, and the thickness of 4.75 mm or more qualifies it for tariff item 7219.31.00.