Hot-Rolled Monel 400 Sheet Stock
Heavy-gauge sheet stock from Monel 400 alloy, a nickel-copper alloy with 67% nickel content. The product is hot-rolled, not in coils, with a thickness over 10 mm and a width of 600 mm or more, and remains not further worked. It falls precisely under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is classified as a nickel alloy rather than stainless steel
Monel 400, with its high nickel content, may be more appropriately classified under Chapter 75.
If the thickness is 4.75 mm or more but not exceeding 10 mm
Thinner hot-rolled products are classified under a different tariff item.
If the width is less than 600 mm
Flat-rolled products narrower than 600 mm are classified under heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the product's chromium content meets the stainless steel threshold, as Monel 400 may not qualify
• If the nickel content is dominant, consider classification under Chapter 75
• Provide detailed alloy composition and dimensions on the customs declaration
Related Products under Tariff item 7219.21.00
17-4PH Precipitation Hardening Stainless Plate
17-4PH precipitation-hardening martensitic stainless steel plate, hot-rolled to a thickness exceeding 10 mm and a width over 2000 mm, supplied as flat plates without further working. This product meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more, not in coils, and over 10 mm thick. It is commonly used in aerospace and structural applications requiring high strength and corrosion resistance.
17-4 PH Precipitation Hardening Stainless Plate 10.5mm Thick 1800mm Wide
17-4 PH martensitic stainless steel hot-rolled plate, 10.5 mm thick and 1800 mm wide, not in coils. The plate is not further worked beyond hot rolling and is classified under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is commonly used in aerospace and structural applications.
17-4 PH Precipitation Hardening Stainless Steel Plate 18mm
17-4 PH precipitation hardening stainless steel hot-rolled plate, 18 mm thick and 1800 mm wide, supplied flat without coils. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
310 Hot-Rolled Stainless Steel Heavy Slab 18mm
310 high-temperature stainless steel slab, hot-rolled to 18 mm thickness and exceeding 1880 mm width, supplied as flat pieces not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its high-temperature resistance suits furnace and heat-exchanger applications.
316Ti Stabilised Stainless Hot-Rolled Slab
316Ti titanium-stabilised stainless steel hot-rolled slab, 16 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more and thickness exceeding 10 mm. Its titanium stabilisation provides improved resistance to sensitisation and intergranular corrosion.
321 Hot-Rolled Stainless Steel Plate 25mm Thick
321 stabilised stainless steel hot-rolled plate, 25 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its stabilisation with titanium or niobium makes it suitable for high-temperature and corrosive environments.