Of a width exceeding 1,830 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than hot-rolled, not in coils: > Of a thickness exceeding 10 mm > Of a width exceeding 1,830 mm
Duty Rate (from China)
Products classified under Tariff item 7219.21.00.20
17-4PH Precipitation Hardening Stainless Plate
17-4PH precipitation-hardening martensitic stainless steel plate, hot-rolled to a thickness exceeding 10 mm and a width over 2000 mm, supplied as flat plates without further working. This product meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more, not in coils, and over 10 mm thick. It is commonly used in aerospace and structural applications requiring high strength and corrosion resistance.
7219.21.0017-4 PH Precipitation Hardening Stainless Plate 10.5mm Thick 1800mm Wide
17-4 PH martensitic stainless steel hot-rolled plate, 10.5 mm thick and 1800 mm wide, not in coils. The plate is not further worked beyond hot rolling and is classified under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is commonly used in aerospace and structural applications.
7219.21.0017-4 PH Precipitation Hardening Stainless Steel Plate 18mm
17-4 PH precipitation hardening stainless steel hot-rolled plate, 18 mm thick and 1800 mm wide, supplied flat without coils. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00310 Hot-Rolled Stainless Steel Heavy Slab 18mm
310 high-temperature stainless steel slab, hot-rolled to 18 mm thickness and exceeding 1880 mm width, supplied as flat pieces not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its high-temperature resistance suits furnace and heat-exchanger applications.
7219.21.00316Ti Stabilised Stainless Hot-Rolled Slab
316Ti titanium-stabilised stainless steel hot-rolled slab, 16 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more and thickness exceeding 10 mm. Its titanium stabilisation provides improved resistance to sensitisation and intergranular corrosion.
7219.21.00321 Hot-Rolled Stainless Steel Plate 25mm Thick
321 stabilised stainless steel hot-rolled plate, 25 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its stabilisation with titanium or niobium makes it suitable for high-temperature and corrosive environments.
7219.21.00409 Hot-Rolled Stainless Steel Plate 12mm Thick
409 ferritic stainless steel plate, hot-rolled to 12 mm thickness and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more and thickness exceeding 10 mm. Its ferritic structure and corrosion resistance make it suitable for automotive exhaust systems.
7219.21.00430 Hot-Rolled Stainless Steel Heavy Plate 11mm
430 ferritic stainless steel heavy plate, hot-rolled to 11 mm thickness with a width exceeding 1880 mm, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its good corrosion resistance and formability make it suitable for industrial applications.
7219.21.00AISI 304 Hot-Rolled Stainless Steel Plate 12mm Thick
AISI 304 hot-rolled stainless steel plate, 12 mm thick and 1500 mm wide, supplied flat without coils. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00AISI 310 Hot-Rolled Stainless Steel Plate 25mm Thick
AISI 310 hot-rolled stainless steel plate, 25 mm thick and 1000 mm wide, not coiled, for furnace and heat exchanger applications. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00AISI 316L Hot-Rolled Stainless Steel Slab 15mm Thick
AISI 316L hot-rolled stainless steel plate with molybdenum for enhanced corrosion resistance, 15 mm thick and 1200 mm wide, not in coils. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00AISI 321 Hot-Rolled Stainless Steel Plate 22mm Thick
AISI 321 hot-rolled stainless steel plate with titanium addition, 22 mm thick and 1400 mm wide, for welded fabrications. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00AISI 430 Hot-Rolled Ferritic Stainless Steel Plate 12mm Thick
AISI 430 hot-rolled ferritic stainless steel plate, 12 mm thick and 1100 mm wide, cost-effective corrosion resistance for architectural panels. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00AL-6XN Hot-Rolled Stainless Steel Plate 10.2mm Thick 1710mm Wide
AL-6XN super-austenitic stainless hot-rolled plate, 10.2 mm thick and 1710 mm wide, flat and not in coils. The plate is not further worked beyond hot rolling and is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is designed for severe corrosion environments.
7219.21.00AL-6XN Hot-Rolled Stainless Steel Plate 30mm Thick
AL-6XN super austenitic stainless hot-rolled plate, 30 mm thick and 2000 mm wide, for chemical processing vessels. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Custom 304L Extra-Wide Hot-Rolled Plate 14mm
Custom 304L low-carbon stainless steel plate, hot-rolled to 14 mm thickness and 2200 mm width, supplied as flat plates for shipbuilding. This product is not further worked beyond hot rolling and meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more and thickness exceeding 10 mm. Its low carbon content improves weldability and corrosion resistance.
7219.21.00Duplex 2205 Hot-Rolled Stainless Steel Plate 11mm Thick 1750mm Wide
Duplex 2205 stainless steel hot-rolled plate at 11 mm thickness and 1750 mm width, not in coils or further worked. The plate offers high strength and corrosion resistance and is classified under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Duplex 2205 Hot-Rolled Stainless Steel Plate 20mm Thick
Duplex 2205 (UNS S31803) hot-rolled stainless steel plate, 20 mm thick and 2000 mm wide, featuring high strength and corrosion resistance for offshore platforms. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Duplex 2205 Stainless Steel Hot-Rolled Plate 20mm
Duplex 2205 stainless steel hot-rolled plate, 20 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its duplex microstructure provides high strength and excellent corrosion resistance for demanding applications.
7219.21.00Hot-Rolled 17-4 PH Stainless Steel Plate 18mm
17-4 PH precipitation-hardening stainless steel plate, 18 mm thick by 1300 mm wide, hot-rolled only, not in coils. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Hot-Rolled 304 Stainless Steel Plate 12mm Thick
A flat-rolled plate of 304 stainless steel, hot-rolled to a thickness of 12 mm and width of 1500 mm, not further worked beyond hot-rolling and not in coil form. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Hot-Rolled 310 Stainless Steel Heavy Plate 25mm Thick
High-temperature 310 stainless steel plate hot-rolled to 25 mm thick and 1550 mm wide, not coiled or further worked. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Hot-Rolled 316L Stainless Steel Slab 15mm Thick
A 15 mm thick, 1200 mm wide hot-rolled plate of 316L stainless steel, supplied flat and not in coils, without any surface treatments beyond hot-rolling. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Alloy 20 Plate
Hot-rolled flat-rolled plate of Carpenter 20 alloy, a high-nickel stainless steel containing approximately 35% nickel. The plate exceeds 10 mm in thickness and 600 mm in width, is not in coils, and has not been further worked beyond hot rolling. This product falls under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Duplex 2205 Stainless Steel Plate 20mm
Duplex 2205 stainless steel plate, hot-rolled to 20 mm thickness and 1400 mm width, not in coils and free of further processing. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Hastelloy C-276 Slab
Hot-rolled flat-rolled slab of Hastelloy C-276, a nickel-based alloy steel containing approximately 57% nickel. The slab is produced by hot rolling to a thickness exceeding 10 mm and a width exceeding 600 mm, and is supplied not in coils. It is classified under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Incoloy 800H Plate
Hot-rolled flat-rolled plate of Incoloy 800H, a high-nickel alloy stainless steel containing over 30% nickel. The plate is hot-rolled to a thickness exceeding 10 mm and a width over 600 mm, is not in coils, and has not been further worked. It falls under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Inconel 625 Plate
Hot-rolled flat-rolled plate made from Inconel 625 superalloy with over 58% nickel content. The plate is hot-rolled to a thickness greater than 10 mm and a width of 600 mm or more, is not coiled, and is without further working. This product matches tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Hot-Rolled Monel 400 Sheet Stock
Heavy-gauge sheet stock from Monel 400 alloy, a nickel-copper alloy with 67% nickel content. The product is hot-rolled, not in coils, with a thickness over 10 mm and a width of 600 mm or more, and remains not further worked. It falls precisely under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Nitronic 50 Hot-Rolled Stainless Plate 11.5mm Thick 1760mm Wide
High-manganese Nitronic 50 austenitic stainless plate, hot-rolled to 11.5 mm thickness and 1760 mm width, not further worked or coiled. The plate is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It offers galling resistance for demanding applications.
7219.21.00Nitronic 60 Hot-Rolled Stainless Steel Plate 14mm Thick
Nitronic 60 austenitic stainless steel hot-rolled plate offering galling and wear resistance, 14 mm thick and 1600 mm wide, flat not coiled. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00SMO 254 Hot-Rolled Super Austenitic Stainless Plate 16mm
SMO 254 (6Mo) super austenitic stainless hot-rolled plate, 16 mm thick and 2500 mm wide, extreme corrosion resistance for desalination plants. This product falls under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
7219.21.00Type 304 Hot-Rolled Stainless Steel Plate 12mm Thick 1700mm Wide
Hot-rolled plate of austenitic 304 stainless steel, measuring 12 mm thick and 1700 mm wide, not further worked beyond hot rolling and not in coils. It falls under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Type 310 Hot-Rolled Stainless Steel Plate 13mm Thick 1600mm Wide
High-temperature resistant Type 310 stainless steel plate, hot-rolled to 13 mm thick and 1600 mm wide, not coiled or further processed. The plate is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
7219.21.00Type 316L Hot-Rolled Stainless Steel Slab 15mm Thick 1650mm Wide
Hot-rolled 316L stainless steel plate, 15 mm thick and 1650 mm wide, supplied flat and not in coils. The plate is not further worked beyond hot rolling and is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is ideal for marine applications.
7219.21.00Type 317L Hot-Rolled Stainless Steel Plate 13.5mm Thick 1640mm Wide
Low-carbon Type 317L stainless plate, hot-rolled to 13.5 mm thickness and 1640 mm width, not further worked. The plate is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is molybdenum-enhanced for pulp and paper applications.
7219.21.00Type 321 Hot-Rolled Stainless Steel Heavy Plate 14mm Thick 1720mm Wide
Stabilized Type 321 stainless steel plate hot-rolled to 14 mm thickness and 1720 mm width, no coils or additional working. The plate is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It offers excellent weldability.
7219.21.00Type 347 Hot-Rolled Stainless Steel Plate 12.5mm Thick 1680mm Wide
Niobium-stabilized Type 347 stainless hot-rolled plate, 12.5 mm thick and 1680 mm wide, flat and not in coils. The plate is classified under tariff item 7219.21.00 for flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is suited for high-temperature exhaust applications.
7219.21.00Type 904L Hot-Rolled Stainless Steel Plate 16mm Thick 1620mm Wide
Type 904L super-austenitic stainless steel plate, hot-rolled to a thickness of 16 mm and a width of 1620 mm, supplied in flat lengths rather than coils. This product is not further worked beyond hot rolling, and its dimensions place it squarely within the tariff item for flat-rolled stainless steel products over 600 mm wide and exceeding 10 mm in thickness. Its high corrosion resistance makes it suitable for pharmaceutical and chemical processing equipment.