Hot-Rolled Alloy 20 Plate
Hot-rolled flat-rolled plate of Carpenter 20 alloy, a high-nickel stainless steel containing approximately 35% nickel. The plate exceeds 10 mm in thickness and 600 mm in width, is not in coils, and has not been further worked beyond hot rolling. This product falls under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate thickness is 4.75 mm or more but not exceeding 10 mm
This alternative covers hot-rolled stainless steel flat products of similar width but thinner, which would not meet the thickness threshold of 7219.21.00.
If the plate width is less than 600 mm
Products narrower than 600 mm fall under heading 7220 for flat-rolled stainless steel of less than 600 mm width.
If the plate is supplied in coils
Hot-rolled stainless steel in coils is classified separately from flat products not in coils, even if the thickness exceeds 10 mm.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the plate's dimensions (thickness over 10 mm, width over 600 mm) are clearly stated on the commercial invoice
• Confirm the stainless steel composition (at least 10.5% chromium) to avoid misclassification
• Keep mill test certificates available for CBSA verification
Related Products under Tariff item 7219.21.00
17-4PH Precipitation Hardening Stainless Plate
17-4PH precipitation-hardening martensitic stainless steel plate, hot-rolled to a thickness exceeding 10 mm and a width over 2000 mm, supplied as flat plates without further working. This product meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more, not in coils, and over 10 mm thick. It is commonly used in aerospace and structural applications requiring high strength and corrosion resistance.
17-4 PH Precipitation Hardening Stainless Plate 10.5mm Thick 1800mm Wide
17-4 PH martensitic stainless steel hot-rolled plate, 10.5 mm thick and 1800 mm wide, not in coils. The plate is not further worked beyond hot rolling and is classified under tariff item 7219.21.00 as flat-rolled stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm. It is commonly used in aerospace and structural applications.
17-4 PH Precipitation Hardening Stainless Steel Plate 18mm
17-4 PH precipitation hardening stainless steel hot-rolled plate, 18 mm thick and 1800 mm wide, supplied flat without coils. This product is classified under tariff item 7219.21.00 as it is a flat-rolled product of stainless steel, not further worked than hot-rolled, with a thickness exceeding 10 mm.
310 Hot-Rolled Stainless Steel Heavy Slab 18mm
310 high-temperature stainless steel slab, hot-rolled to 18 mm thickness and exceeding 1880 mm width, supplied as flat pieces not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its high-temperature resistance suits furnace and heat-exchanger applications.
316Ti Stabilised Stainless Hot-Rolled Slab
316Ti titanium-stabilised stainless steel hot-rolled slab, 16 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's definition of a flat-rolled stainless steel product of a width of 600 mm or more and thickness exceeding 10 mm. Its titanium stabilisation provides improved resistance to sensitisation and intergranular corrosion.
321 Hot-Rolled Stainless Steel Plate 25mm Thick
321 stabilised stainless steel hot-rolled plate, 25 mm thick and over 1880 mm wide, supplied as flat plates not in coils. This product is not further worked beyond hot rolling and meets the tariff item's criteria for flat-rolled stainless steel of a width of 600 mm or more and thickness exceeding 10 mm. Its stabilisation with titanium or niobium makes it suitable for high-temperature and corrosive environments.