Of a thickness of 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than hot-rolled, in coils: > Of a thickness of 3 mm or more but less than 4.75 mm > Of a thickness of 3 mm or more but less than 4.75 mm
Duty Rate (from China)
Products classified under Tariff item 7219.13.00.00
17-4 PH Precipitation Hardening Stainless Coil 3.4mm x 1550mm
Hot-rolled coil of 17-4 PH precipitation-hardening stainless steel, 3.4 mm thick and 1550 mm wide, not further worked beyond hot rolling. The coil is intended for aerospace and structural applications. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.0017-4PH Precipitation Hardening Stainless Coil 3.7mm
Hot-rolled stainless steel coil in grade 17-4PH, a martensitic precipitation-hardening alloy. At 3.7 mm thickness and 800 mm width, it meets the definition of a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.002205 Duplex Mill Edge Coil 4.6mm x 1620mm
Hot-rolled mill edge coil of duplex 2205 stainless steel, 4.6 mm thick and 1620 mm wide, not further worked beyond hot rolling. The coil retains its mill edge and hot-rolled surface. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00254 SMO Hot-Rolled Coil Stock
254 SMO super stainless steel hot-rolled coil, 3.4 mm thick and 1600 mm wide, with high nickel and molybdenum content for seawater and chemical applications. Not further worked beyond hot-rolling, this product classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00310 Hot-Rolled Stainless Steel Coil 4.2mm
Hot-rolled stainless steel coil in grade 310, an austenitic alloy designed for high-temperature service. With a thickness of 4.2 mm, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00316L Hot-Rolled Stainless Steel Coil 3.6mm
Hot-rolled stainless steel coil in grade 316L, a low-carbon austenitic alloy with enhanced corrosion resistance. At 3.6 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00316L Hot-Rolled Stainless Steel Coil 4.4mm x 1480mm
Hot-rolled coil of 316L low-carbon stainless steel, 4.4 mm thick and 1480 mm wide, not further worked beyond hot rolling. The coil is intended for marine applications and retains its hot-rolled surface. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00321 Hot-Rolled Stainless Coil 3.25mm Thick
Hot-rolled stainless steel coil in grade 321, stabilized with titanium to resist weld decay. At 3.25 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00409 Hot-Rolled Stainless Coil 3.4mm Automotive Grade
Hot-rolled stainless steel coil in grade 409, a ferritic alloy used in automotive exhaust systems. At 3.4 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00409 Hot-Rolled Stainless Steel Coil 4.2mm x 1380mm
Hot-rolled coil of automotive-grade ferritic 409 stainless steel, 4.2 mm thick and 1380 mm wide, not further worked beyond hot rolling. The coil retains its hot-rolled surface and is intended for automotive applications. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00430 Hot-Rolled Stainless Steel Coil 3.8mm
Hot-rolled stainless steel coil in grade 430, a ferritic alloy suitable for automotive trim and appliances. At 3.8 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00AISI 316 Hot-Rolled Stainless Coil 3.2mm
Hot-rolled stainless steel coil in grade 316, an austenitic alloy with molybdenum for enhanced corrosion resistance. At 3.2 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00AL-6XN Hot-Rolled Stainless Coil 4.1mm x 1530mm
Hot-rolled coil of AL-6XN super-austenitic stainless steel, 4.1 mm thick and 1530 mm wide, not further worked beyond hot rolling. The coil retains its hot-rolled surface and is used in highly corrosive environments. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Duplex 2205 Hot-Rolled Stainless Coil 4mm
Hot-rolled stainless steel coil in grade Duplex 2205, a duplex alloy offering high strength and corrosion resistance. At 4 mm thickness and 700 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Duplex 2205 Hot-Rolled Stainless Steel Coil 3.8mm Thick 1520mm Wide
Hot-rolled coil of duplex 2205 stainless steel (UNS S31803), 3.8 mm thick and 1520 mm wide, not further worked beyond hot rolling. The coil offers high strength and corrosion resistance for offshore applications. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Duplex 2507 Super Duplex Coil 3.6mm x 1650mm
Super duplex 2507 is a highly corrosion-resistant stainless steel, hot-rolled into coil form with a thickness of 3.6 mm and a width of 1650 mm. It is not further worked beyond hot rolling, making it classifiable under tariff item 7219.13.00 for flat-rolled stainless steel products.
7219.13.00Hot-Rolled 17-4 PH Stainless Steel Coil 4.5mm
Hot-rolled stainless steel coil in grade 17-4PH, a precipitation-hardening alloy. At 4.5 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils, suitable for aerospace and valve applications.
7219.13.00Hot-Rolled 2205 Duplex Stainless Coil 4.6mm
Hot-rolled stainless steel coil in grade Duplex 2205, a duplex alloy with high strength and corrosion resistance. At 4.6 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 304H Stainless Steel Coil 3.6mm
Hot-rolled stainless steel coil in grade 304H, a high-carbon variant of 304 for elevated temperature service. At 3.6 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 304L Stainless Coil 3.9mm
Hot-rolled stainless steel coil in grade 304L, a low-carbon austenitic alloy suitable for welding applications. At 3.9 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 304 Stainless Steel Coil 3.5mm Thick
Hot-rolled stainless steel coil in grade 304, an austenitic alloy widely used in various industries. At 3.5 mm thickness and width exceeding 600 mm, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 310 Stainless Steel Coil 3.7mm Thick
Hot-rolled stainless steel coil in grade 310, an austenitic alloy for high-temperature applications. At 3.7 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 316H Stainless Steel Coil 4.4mm
Hot-rolled stainless steel coil in grade 316H, a high-carbon variant of 316 for elevated temperature service. At 4.4 mm thickness and over 600 mm width, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
7219.13.00Hot-Rolled 316L Stainless Steel Coil 4mm Thick
Hot-rolled coil of grade 316L stainless steel, 4 mm thick and more than 600 mm wide, not further worked beyond hot rolling. The mill scale surface remains, as it has not been annealed or pickled. It is classified under tariff item 7219.13.00 as a flat-rolled stainless steel product in coils.
7219.13.00Hot-Rolled 321 Stainless Steel Coil 4.2mm
Hot-rolled coil of titanium-stabilized 321 stainless steel, 4.2 mm thick and 1000 mm or more wide, not annealed or pickled. The coil retains its hot-rolled surface and has not been further worked. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Hot-Rolled 347 Stainless Steel Coil 3.3mm Thick
Hot-rolled coil of niobium-stabilized 347 stainless steel, 3.3 mm thick, not further worked beyond hot rolling. The coil is more than 600 mm wide and retains its mill scale. It is classified under tariff item 7219.13.00 for stainless steel flat-rolled products in coils.
7219.13.00Hot-Rolled 409 Stainless Steel Coil 3.4mm
Hot-rolled coil of ferritic 409 stainless steel, 3.4 mm thick and 700 mm or more wide, not annealed or pickled. The automotive-grade coil retains its hot-rolled surface and is not further worked. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Hot-Rolled 410 Stainless Steel Coil 4.1mm
Hot-rolled coil of martensitic 410 stainless steel, 4.1 mm thick, not further worked beyond hot rolling. The coil is more than 600 mm wide and retains its hot-rolled oxide layer. It is classified under tariff item 7219.13.00 for stainless steel flat-rolled products in coils.
7219.13.00Hot-Rolled 430 Stainless Steel Coil 3.8mm Thick
Hot-rolled coil of ferritic 430 stainless steel, 3.8 mm thick and more than 600 mm wide, not annealed or pickled. The coil retains its typical hot-rolled oxide layer and has not been further worked. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Hot-Rolled 439 Stainless Steel Coil 3.1mm Thick
Hot-rolled coil of ferritic 439 stainless steel, 3.1 mm thick, not further worked beyond hot rolling. The coil is more than 600 mm wide and retains its hot-rolled surface. It is classified under tariff item 7219.13.00 for stainless steel flat-rolled products in coils.
7219.13.00Hot-Rolled 904L Stainless Steel Coil 3.9mm Thick
Hot-rolled coil of super-austenitic 904L stainless steel, 3.9 mm thick and more than 600 mm wide, not annealed or pickled. The coil retains its hot-rolled surface and is not further worked. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils, commonly used in the chemical industry.
7219.13.00Hot-Rolled Duplex 2205 Stainless Steel Coil 3.2mm
Hot-rolled coil of duplex 2205 stainless steel (UNS S31803), 3.2 mm thick and 800 mm or more wide, not annealed or pickled. The coil retains its hot-rolled surface and has not been further worked. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
7219.13.00Type 304 Hot-Rolled Stainless Steel Coil 3.5mm Thick 1500mm Wide
Type 304 austenitic stainless steel hot-rolled coil, 3.5 mm thick and 1500 mm wide, not further worked. This product meets the definition of flat-rolled stainless steel of a width exceeding 600 mm and thickness between 3 mm and 4.75 mm, classifying under tariff item 7219.13.00.
7219.13.00Type 304L Hot-Rolled Stainless Coil 3.1mm x 1700mm Wide
Type 304L low-carbon stainless steel hot-rolled coil, 3.1 mm thick and 1700 mm wide, suitable for welding applications. Not further worked beyond hot-rolling, this product falls under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 310 Hot-Rolled Stainless Steel Coil 3.7mm Thick 1420mm Wide
Type 310 stainless steel hot-rolled coil, 3.7 mm thick and 1420 mm wide, designed for high-temperature applications such as furnace parts. Not further worked beyond hot-rolling, it classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 316 Hot-Rolled Stainless Steel Coil 4mm Thick 1400mm Wide
Type 316 stainless steel hot-rolled coil with molybdenum for enhanced corrosion resistance, 4 mm thick and 1400 mm wide, supplied in coil form without further processing. This product falls under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 317LMN Hot-Rolled Coil 3.9mm x 1390mm
Type 317LMN stainless steel hot-rolled coil, 3.9 mm thick and 1390 mm wide, with molybdenum enhancement for chemical tank applications. Not further worked beyond hot-rolling, this product classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 321 Hot-Rolled Stainless Steel Coil 4.5mm Thick 1450mm Wide
Type 321 titanium-stabilized stainless steel hot-rolled coil, 4.5 mm thick and 1450 mm wide, for high-temperature exhaust systems. Not further worked beyond hot-rolling, this product falls under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 430 Hot-Rolled Stainless Steel Coil 3.2mm Thick 1600mm Wide
Type 430 ferritic stainless steel hot-rolled coil, 3.2 mm thick and 1600 mm wide, used for automotive trim and appliances. Not further worked beyond hot-rolling, this product classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
7219.13.00Type 904L Hot-Rolled Stainless Coil 3.3mm x 1410mm
Type 904L high-nickel stainless steel hot-rolled coil, 3.3 mm thick and 1410 mm wide, for pulp and paper industry applications. Not further worked beyond hot-rolling, this product falls under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.