AL-6XN Hot-Rolled Stainless Coil 4.1mm x 1530mm
Hot-rolled coil of AL-6XN super-austenitic stainless steel, 4.1 mm thick and 1530 mm wide, not further worked beyond hot rolling. The coil retains its hot-rolled surface and is used in highly corrosive environments. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 4.75 mm or more
Thickness above 4.75 mm is classified in a different subheading.
If the coil is further worked, such as annealed or pickled
Further working changes the classification.
If the width is less than 600 mm
Products under 600 mm width are in heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the coil is in as-hot-rolled condition without annealing or pickling
• Keep documentation of the AL-6XN grade and dimensions
• Ensure the width exceeds 600 mm to qualify for this heading
Related Products under Tariff item 7219.13.00
17-4 PH Precipitation Hardening Stainless Coil 3.4mm x 1550mm
Hot-rolled coil of 17-4 PH precipitation-hardening stainless steel, 3.4 mm thick and 1550 mm wide, not further worked beyond hot rolling. The coil is intended for aerospace and structural applications. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
17-4PH Precipitation Hardening Stainless Coil 3.7mm
Hot-rolled stainless steel coil in grade 17-4PH, a martensitic precipitation-hardening alloy. At 3.7 mm thickness and 800 mm width, it meets the definition of a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
2205 Duplex Mill Edge Coil 4.6mm x 1620mm
Hot-rolled mill edge coil of duplex 2205 stainless steel, 4.6 mm thick and 1620 mm wide, not further worked beyond hot rolling. The coil retains its mill edge and hot-rolled surface. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
254 SMO Hot-Rolled Coil Stock
254 SMO super stainless steel hot-rolled coil, 3.4 mm thick and 1600 mm wide, with high nickel and molybdenum content for seawater and chemical applications. Not further worked beyond hot-rolling, this product classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
310 Hot-Rolled Stainless Steel Coil 4.2mm
Hot-rolled stainless steel coil in grade 310, an austenitic alloy designed for high-temperature service. With a thickness of 4.2 mm, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
316L Hot-Rolled Stainless Steel Coil 3.6mm
Hot-rolled stainless steel coil in grade 316L, a low-carbon austenitic alloy with enhanced corrosion resistance. At 3.6 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.