Hot-Rolled 2205 Duplex Stainless Coil 4.6mm
Hot-rolled stainless steel coil in grade Duplex 2205, a duplex alloy with high strength and corrosion resistance. At 4.6 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Specialty Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7218000000–7224999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil has been further processed, such as annealed or pickled
Additional processing moves the product to a different subheading.
If the thickness is 4.75 mm or more
Thicker flat-rolled stainless products are classified under a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the coil width is at least 600 mm and the thickness is within the 3-4.75 mm range
• Ensure no further working has been applied, such as annealing or pickling
Related Products under Tariff item 7219.13.00
17-4 PH Precipitation Hardening Stainless Coil 3.4mm x 1550mm
Hot-rolled coil of 17-4 PH precipitation-hardening stainless steel, 3.4 mm thick and 1550 mm wide, not further worked beyond hot rolling. The coil is intended for aerospace and structural applications. It falls under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
17-4PH Precipitation Hardening Stainless Coil 3.7mm
Hot-rolled stainless steel coil in grade 17-4PH, a martensitic precipitation-hardening alloy. At 3.7 mm thickness and 800 mm width, it meets the definition of a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
2205 Duplex Mill Edge Coil 4.6mm x 1620mm
Hot-rolled mill edge coil of duplex 2205 stainless steel, 4.6 mm thick and 1620 mm wide, not further worked beyond hot rolling. The coil retains its mill edge and hot-rolled surface. It is classified under tariff item 7219.13.00 for flat-rolled stainless steel products in coils.
254 SMO Hot-Rolled Coil Stock
254 SMO super stainless steel hot-rolled coil, 3.4 mm thick and 1600 mm wide, with high nickel and molybdenum content for seawater and chemical applications. Not further worked beyond hot-rolling, this product classifies under tariff item 7219.13.00 for flat-rolled stainless steel of a width exceeding 600 mm and thickness of 3 mm to 4.75 mm.
310 Hot-Rolled Stainless Steel Coil 4.2mm
Hot-rolled stainless steel coil in grade 310, an austenitic alloy designed for high-temperature service. With a thickness of 4.2 mm, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.
316L Hot-Rolled Stainless Steel Coil 3.6mm
Hot-rolled stainless steel coil in grade 316L, a low-carbon austenitic alloy with enhanced corrosion resistance. At 3.6 mm thickness, it is a flat-rolled product of stainless steel, not further worked than hot-rolled, in coils.