Of rectangular (other than square) cross-section
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. > Other: > Of rectangular (other than square) cross-section > Of rectangular (other than square) cross-section
Duty Rate (from China)
Products classified under Tariff item 7218.91
15-5 PH Stainless Billet 175x115mm
A 15-5 PH stainless steel billet with a rectangular cross-section of 175mm x 115mm, used as semi-finished material for aerospace components. This product is in primary form and has not been further worked beyond initial hot-rolling or forging, qualifying it under tariff item 7218.91.00.
7218.91.0017-4 PH Precipitation Hardening Stainless Billet 280 cm²
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area of 280 cm², exceeding 232 cm². It is used for aerospace forgings. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel, despite the larger cross-section.
7218.91.0017-4 PH Precipitation Hardening Stainless Rectangle
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for forging aerospace fasteners and other high-strength components. This product qualifies as a semi-finished product of stainless steel under tariff item 7218.91.00.
7218.91.0017-4 PH Stainless Precipitation Hardening Strip 0.5mm x 180mm
17-4 PH martensitic precipitation-hardening stainless steel hot-rolled strip, measuring 0.5 mm in thickness and 180 mm in width. Despite being described as a strip, its dimensions and semi-finished state place it under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section.
7218.91.0017-4 PH Stainless Steel Slab 220x160mm
A 17-4 PH stainless steel slab with a rectangular cross-section of 220mm x 160mm, used as feedstock for precision tooling. This semi-finished product is in primary form, not further worked than hot-rolled or forged, and falls under tariff item 7218.91.00.
7218.91.00304 High-Strength Stainless Strip 2.5mm x 600mm
High-strength 304 stainless steel variant, hot-rolled strip measuring 2.5 mm in thickness and 600 mm in width, with a yield strength exceeding 355 MPa. Classified under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section, intended for structural components.
7218.91.00304L Stainless Steel Billet 160x110mm
A 304L stainless steel billet with a rectangular cross-section of 160mm x 110mm, used for weldable pipe stock. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00304 Stainless Steel Bloom 200x150mm
A semi-finished 304 stainless steel bloom with a rectangular cross-section of 200mm x 150mm, used as primary feedstock for forging and rolling into bars or plates. This product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00304 Stainless Steel Hot-Rolled Strip 1mm x 150mm
Hot-rolled strip of 304 stainless steel with a rectangular cross-section, measuring 1 mm in thickness and 150 mm in width. The width-to-thickness ratio exceeds 4, and the product is in a semi-finished state, falling under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section.
7218.91.00310 Austenitic High-Temp Stainless Rectangle Billet
A hot-rolled rectangular billet of 310 austenitic stainless steel, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is intended for forging furnace parts and other high-temperature applications. This product is classified as a semi-finished product of stainless steel under tariff item 7218.91.00.
7218.91.00310 Stainless Steel High-Temp Strip 3mm x 750mm
Austenitic 310 stainless steel hot-rolled strip for high-temperature service, measuring 3 mm in thickness and 750 mm in width. This semi-finished product has a rectangular cross-section and falls under tariff item 7218.91.00, suitable for furnace parts and heat exchangers due to its oxidation resistance.
7218.91.00310 Stainless Steel Slab 280x190mm
A 310 stainless steel slab with a rectangular cross-section of 280mm x 190mm, used as stock for furnace parts. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00316L Stainless Steel Slab 250x180mm
A semi-finished 316L stainless steel slab with a rectangular cross-section of 250mm x 180mm, primarily for hot-rolling into wide plates. This product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00316L Stainless Steel Strip 0.8mm x 200mm
Hot-rolled 316L stainless steel strip, 0.8 mm in thickness and 200 mm in width, with a rectangular cross-section. This semi-finished product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section, ideal for marine applications.
7218.91.00316 Stainless Steel Bloom 210x140mm
A 316 marine-grade stainless steel bloom with a rectangular cross-section of 210mm x 140mm, used for propeller shaft forging. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00316 Stainless Steel Hot-Rolled Rectangle Slab
A hot-rolled semi-finished slab of molybdenum-bearing 316 stainless steel, with a rectangular cross-section, a width less than four times its thickness, and a cross-sectional area under 232 cm². It is used for forging corrosion-resistant marine hardware. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00316Ti Stabilized Stainless Strip 1mm x 250mm
316Ti titanium-stabilized stainless steel hot-rolled strip, measuring 1 mm in thickness and 250 mm in width, with a rectangular cross-section. This semi-finished product falls under tariff item 7218.91.00, used for welded fabrications to prevent carbide precipitation in heat-affected zones.
7218.91.00321 Stainless Steel Bloom 300x200mm
A 321 stabilized stainless steel bloom with a rectangular cross-section of 300mm x 200mm, used for high-temperature aerospace forging stock. This semi-finished product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00321 Stainless Steel Stabilized Strip 1.5mm x 300mm
Titanium-stabilized 321 stainless steel hot-rolled strip, measuring 1.5 mm in thickness and 300 mm in width, with a rectangular cross-section. This semi-finished product is classified under tariff item 7218.91.00, used in high-temperature exhaust and aircraft applications.
7218.91.00347 Stainless Steel Bloom 230x155mm
A 347 stabilized stainless steel bloom with a rectangular cross-section of 230mm x 155mm, used for welded structures. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00409 Automotive Exhaust Stainless Rectangle Semi
A ferritic 409 stainless steel rectangular semi-finished stock, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is intended for forging exhaust system mufflers. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00409 Stainless Steel Automotive Strip 1.2mm x 1,000mm
Ferritic 409 stainless steel hot-rolled strip optimized for exhaust systems, measuring 1.2 mm in thickness and 1,000 mm in width, with a rectangular cross-section. This semi-finished product is classified under tariff item 7218.91.00, with lower chromium content making it cost-effective for automotive applications.
7218.91.00409 Stainless Steel Rectangular Bloom 240x170mm
A 409 automotive exhaust grade stainless steel bloom with a rectangular cross-section of 240mm x 170mm, used for tube rolling. This semi-finished product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00420 Stainless Steel Rectangular Slab 190x130mm
A 420 martensitic stainless steel slab with a rectangular cross-section of 190mm x 130mm, used for cutlery and knife stock. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00430 Ferritic Stainless Rectangle Semi-Finished Bar
A ferritic 430 stainless steel semi-finished bar stock in a rectangular profile, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for forging appliance trim. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00430 Stainless Steel Rectangular Billet 180x120mm
A 430 ferritic stainless steel billet with a rectangular cross-section of 180mm x 120mm, used for extrusion into structural shapes. This semi-finished product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00431 Stainless Steel Slab 200x135mm
A 431 martensitic stainless steel slab with a rectangular cross-section of 200mm x 135mm, used for shafts. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00904L Stainless Steel Billet 270x185mm
A super-austenitic 904L stainless steel billet with a rectangular cross-section of 270mm x 185mm, used for chemical processing equipment. This semi-finished product is in primary form and not further worked, falling under tariff item 7218.91.00.
7218.91.00AISI 304L Stainless Steel Rectangle Billet
A semi-finished rectangular billet of AISI 304L low-carbon austenitic stainless steel, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for hot forging automotive components. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00AISI 316Ti Stabilized Rectangle Stainless Bloom
A titanium-stabilized 316Ti stainless steel rectangle bloom, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for forging chemical processing valves. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00AISI 321 Stainless Stabilized Rectangle Billet
A titanium-stabilized AISI 321 stainless steel rectangular billet, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is intended for forging high-temperature exhaust manifolds. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Duplex 2205 Stainless Billet 150x100mm
A duplex 2205 stainless steel billet with a rectangular cross-section of 150mm x 100mm, corrosion-resistant for offshore piping feedstock. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.
7218.91.00Duplex 2205 Stainless Rectangle Bloom
A duplex 2205 stainless steel bloom in a rectangular cross-section, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It offers high strength for oil and gas valve components. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Duplex 2205 Stainless Steel Billet 300 cm²
A duplex 2205 (UNS S31803) stainless steel rectangular billet with a cross-sectional area of 300 cm², exceeding 232 cm². It is intended for offshore platform components. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Monel 400 Nickel-Stainless Rectangle Semi-Finished
A rectangular semi-finished product of Monel 400, a nickel-copper alloy treated as stainless steel for classification purposes, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for marine propeller shafts. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Super Duplex 2507 Stainless Billet 260 cm²
A super duplex 2507 (25Cr-7Ni) stainless steel rectangular billet with a cross-sectional area of 260 cm², exceeding 232 cm². It is used for chemical processing equipment. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Type 304 Stainless Steel Rectangle Billet 250 cm²
A semi-finished rectangular billet of Type 304 austenitic stainless steel with a cross-sectional area of 250 cm², exceeding 232 cm², and a width less than four times its thickness. It is used for hot forging into structural components. This product falls under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Type 310 Stainless Steel Rectangle Bloom 235 cm²
A high-temperature Type 310 stainless steel rectangular bloom with a cross-sectional area of 235 cm², exceeding 232 cm². It is intended for furnace parts production. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel.
7218.91.00Type 316L Stainless Steel Hot-Rolled Slab 240 cm²
Hot-rolled rectangular slab of low-carbon Type 316L stainless steel with a cross-section of 240 cm², intended for further forging into marine-grade fittings. Classified under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular (other than square) cross-section.
7218.91.00Type 321 Stainless Steel Stabilized Rectangle Slab 245 cm²
Titanium-stabilized Type 321 stainless steel rectangular slab with a cross-section of 245 cm², used for welded exhaust systems. This semi-finished product meets the definition of stainless steel per Chapter 72 notes and has a rectangular cross-section, falling under tariff item 7218.91.00.