17-4 PH Stainless Precipitation Hardening Strip 0.5mm x 180mm
17-4 PH martensitic precipitation-hardening stainless steel hot-rolled strip, measuring 0.5 mm in thickness and 180 mm in width. Despite being described as a strip, its dimensions and semi-finished state place it under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the strip is cold-rolled (not just hot-rolled)
Flat-rolled products of stainless steel, of a width of less than 600 mm, further worked than hot-rolled (e.g., cold-rolled), are classified in heading 7220.
If the product is in irregularly wound coils
Bars and rods of stainless steel, hot-rolled in irregularly wound coils, are classified under heading 7221.
If the product is further worked into bars or rods (not flat-rolled)
Other bars and rods of stainless steel, not further worked than hot-rolled or hot-drawn, are classified under heading 7222.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm that the product is not further worked beyond hot-rolling, as cold-working or additional processing may reclassify it under a different heading
• Provide a mill certificate detailing the chemical composition (e.g
• chromium, nickel, copper) to substantiate the stainless steel grade
• Verify whether the goods are eligible for duty relief under a Canada free trade agreement
Related Products under Tariff item 7218.91.00
15-5 PH Stainless Billet 175x115mm
A 15-5 PH stainless steel billet with a rectangular cross-section of 175mm x 115mm, used as semi-finished material for aerospace components. This product is in primary form and has not been further worked beyond initial hot-rolling or forging, qualifying it under tariff item 7218.91.00.
17-4 PH Precipitation Hardening Stainless Billet 280 cm²
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area of 280 cm², exceeding 232 cm². It is used for aerospace forgings. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel, despite the larger cross-section.
17-4 PH Precipitation Hardening Stainless Rectangle
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for forging aerospace fasteners and other high-strength components. This product qualifies as a semi-finished product of stainless steel under tariff item 7218.91.00.
17-4 PH Stainless Steel Slab 220x160mm
A 17-4 PH stainless steel slab with a rectangular cross-section of 220mm x 160mm, used as feedstock for precision tooling. This semi-finished product is in primary form, not further worked than hot-rolled or forged, and falls under tariff item 7218.91.00.
304 High-Strength Stainless Strip 2.5mm x 600mm
High-strength 304 stainless steel variant, hot-rolled strip measuring 2.5 mm in thickness and 600 mm in width, with a yield strength exceeding 355 MPa. Classified under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section, intended for structural components.
304L Stainless Steel Billet 160x110mm
A 304L stainless steel billet with a rectangular cross-section of 160mm x 110mm, used for weldable pipe stock. This semi-finished product is in primary form and not further worked, qualifying for tariff item 7218.91.00.