430 Stainless Steel Rectangular Billet 180x120mm
A 430 ferritic stainless steel billet with a rectangular cross-section of 180mm x 120mm, used for extrusion into structural shapes. This semi-finished product is in primary form and not further worked, falling under tariff item 7218.91.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Specialty Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7218000000–7224999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the billet is made of other alloy steel
Other alloy steel semi-finished products fall under heading 7224.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the billet's rectangular cross-section and primary form
• Provide mill certificates for 430 ferritic composition
• Verify if the product is subject to any import restrictions
Related Products under Tariff item 7218.91.00
15-5 PH Stainless Billet 175x115mm
A 15-5 PH stainless steel billet with a rectangular cross-section of 175mm x 115mm, used as semi-finished material for aerospace components. This product is in primary form and has not been further worked beyond initial hot-rolling or forging, qualifying it under tariff item 7218.91.00.
17-4 PH Precipitation Hardening Stainless Billet 280 cm²
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area of 280 cm², exceeding 232 cm². It is used for aerospace forgings. This product is classified under tariff item 7218.91.00 as a semi-finished product of stainless steel, despite the larger cross-section.
17-4 PH Precipitation Hardening Stainless Rectangle
A semi-finished rectangular billet of 17-4 PH martensitic precipitation-hardening stainless steel, with a cross-sectional area under 232 cm² and a width less than four times its thickness. It is used for forging aerospace fasteners and other high-strength components. This product qualifies as a semi-finished product of stainless steel under tariff item 7218.91.00.
17-4 PH Stainless Precipitation Hardening Strip 0.5mm x 180mm
17-4 PH martensitic precipitation-hardening stainless steel hot-rolled strip, measuring 0.5 mm in thickness and 180 mm in width. Despite being described as a strip, its dimensions and semi-finished state place it under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section.
17-4 PH Stainless Steel Slab 220x160mm
A 17-4 PH stainless steel slab with a rectangular cross-section of 220mm x 160mm, used as feedstock for precision tooling. This semi-finished product is in primary form, not further worked than hot-rolled or forged, and falls under tariff item 7218.91.00.
304 High-Strength Stainless Strip 2.5mm x 600mm
High-strength 304 stainless steel variant, hot-rolled strip measuring 2.5 mm in thickness and 600 mm in width, with a yield strength exceeding 355 MPa. Classified under tariff item 7218.91.00 as a semi-finished product of stainless steel with a rectangular cross-section, intended for structural components.