Hot-Drawn Steel J-Section 3 Inch
A J-shaped profile section hot-drawn from non-alloy steel, measuring 3 inches, used for edging applications. It is not further worked beyond hot-drawing, qualifying under tariff item 7216.50.00 as an angle, shape, or section of iron or non-alloy steel.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the J-section is a U, I, or H section
U, I, and H sections are classified under a different tariff item in the same heading.
If the J-section is further worked (e.g., drilled, punched, or coated)
Further working moves the product to the 'other' tariff item for angles, shapes, and sections.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-drawing (e.g
• no drilling, bending, or coating) to qualify for this tariff item
• Provide a mill certificate or test report confirming the non-alloy steel composition
• Declare the correct dimensions and weight on the CBSA customs declaration
Related Products under Tariff item 7216.50.00
Hot-Drawn Steel Flat Bar 1.5x1/2 Inch
This is a hot-drawn flat bar of non-alloy steel, measuring 1.5 inches by 0.5 inches, with a rectangular cross-section. It is classified under tariff item 7216.50.00 as an angle, shape, or section not further worked than hot-drawn, since its dimensions and production method align with the definition of shapes and sections in Chapter 72.
Hot-Drawn Steel Z-Purlin 8 Inch
A Z-shaped purlin section hot-drawn from non-alloy steel, 8 inches in depth, used for roofing supports in metal buildings. It is not further worked beyond hot-drawing, making it classifiable under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Extruded Steel Bulb Angle 6 Inch
A bulb flat angle shape extruded hot from non-alloy steel, 6 inches in size, used in shipbuilding. It is not further worked beyond hot extrusion, qualifying under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Extruded Steel H-Beam 6x4 Inch
An H-shaped wide flange beam produced by hot extrusion of non-alloy steel, measuring 6 inches in height by 4 inches in flange width. It is not further worked beyond hot extrusion, making it classifiable under tariff item 7216.50.00 as an extruded shape.
Hot-Extruded Steel Tee Bar 4x1/4 Inch
A tee bar extruded hot from non-alloy steel, with a 4-inch flange and 1/4-inch thickness. It is not further worked beyond hot extrusion, qualifying under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Rolled Steel C-Purlin 10 Inch
A C-shaped purlin hot-rolled from non-alloy steel, 10 inches in depth, used for industrial building supports. It is not further worked beyond hot-rolling, making it classifiable under tariff item 7216.50.00 as an angle, shape, or section.