Hot-Drawn Steel Flat Bar 1.5x1/2 Inch
This is a hot-drawn flat bar of non-alloy steel, measuring 1.5 inches by 0.5 inches, with a rectangular cross-section. It is classified under tariff item 7216.50.00 as an angle, shape, or section not further worked than hot-drawn, since its dimensions and production method align with the definition of shapes and sections in Chapter 72.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is a U, I, or H section
This heading covers specific structural shapes, which may apply if the flat bar is formed into such profiles.
If the product is an L section
L-shaped angles are classified separately, and this alternative applies if the flat bar is bent or formed into an L profile.
If the product is further worked than hot-drawn
Bars and rods of non-alloy steel, other, may apply if the product undergoes additional processing beyond hot-drawing.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-drawing; additional processing like machining or coating may change classification
• Verify the dimensions and cross-section to confirm it does not meet the definition of bars or rods, which fall under other headings
• Keep mill certificates or test reports to support the non-alloy steel composition
Related Products under Tariff item 7216.50.00
Hot-Drawn Steel J-Section 3 Inch
A J-shaped profile section hot-drawn from non-alloy steel, measuring 3 inches, used for edging applications. It is not further worked beyond hot-drawing, qualifying under tariff item 7216.50.00 as an angle, shape, or section of iron or non-alloy steel.
Hot-Drawn Steel Z-Purlin 8 Inch
A Z-shaped purlin section hot-drawn from non-alloy steel, 8 inches in depth, used for roofing supports in metal buildings. It is not further worked beyond hot-drawing, making it classifiable under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Extruded Steel Bulb Angle 6 Inch
A bulb flat angle shape extruded hot from non-alloy steel, 6 inches in size, used in shipbuilding. It is not further worked beyond hot extrusion, qualifying under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Extruded Steel H-Beam 6x4 Inch
An H-shaped wide flange beam produced by hot extrusion of non-alloy steel, measuring 6 inches in height by 4 inches in flange width. It is not further worked beyond hot extrusion, making it classifiable under tariff item 7216.50.00 as an extruded shape.
Hot-Extruded Steel Tee Bar 4x1/4 Inch
A tee bar extruded hot from non-alloy steel, with a 4-inch flange and 1/4-inch thickness. It is not further worked beyond hot extrusion, qualifying under tariff item 7216.50.00 as an angle, shape, or section.
Hot-Rolled Steel C-Purlin 10 Inch
A C-shaped purlin hot-rolled from non-alloy steel, 10 inches in depth, used for industrial building supports. It is not further worked beyond hot-rolling, making it classifiable under tariff item 7216.50.00 as an angle, shape, or section.