Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. > U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: > L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more > L sections, unequal legs: > Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers
Duty Rate (from China)
Products classified under Tariff item 7216.50.00.20
Hot-Drawn Steel J-Section 3 Inch
> A J-shaped profile section hot-drawn from nonalloy steel, measuring 3 inches, used for edging applications. It is not further worked beyond hot-drawing, fitting the definition of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Drawn Steel Z-Purlin 8 Inch
> A Z-shaped purlin section hot-drawn from nonalloy steel, 8 inches in depth, used for roofing supports in metal buildings. It is not further worked beyond hot-drawing, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Extruded Steel Bulb Angle 6 Inch
> A bulb flat angle shape extruded hot from nonalloy steel, 6 inches in size, used in shipbuilding. It is not further worked beyond hot extrusion, fitting the scope of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Extruded Steel H-Beam 6x4 Inch
> An H-shaped wide flange beam produced by hot extrusion of nonalloy steel, 6 inches high by 4 inches wide. It is not further worked beyond hot extrusion, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Extruded Steel Tee Bar 4x1/4 Inch
> A tee bar extruded hot, with a 4-inch flange and 1/4-inch thickness, made of nonalloy steel. It is not further worked beyond hot extrusion, fitting the definition of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Rolled Steel C-Purlin 10 Inch
> A C-shaped purlin hot-rolled from nonalloy steel, 10 inches deep, used for industrial building supports. It is not further worked beyond hot-rolling, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Rolled Steel Equal Angle 2x2x1/8 Inch
> An equal leg angle bar hot-rolled from nonalloy steel, 2x2 inches with 1/8-inch thickness, used in light framing. It is not further worked beyond hot-rolling, fitting the definition of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Rolled Steel Hat Section 6 Inch
> A hat-shaped section hot-rolled from nonalloy steel, 6 inches in size, used for framing applications. It is not further worked beyond hot-rolling, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Rolled Steel L-Angle 3x3x1/4 Inch
> An L-shaped structural steel angle bar, 3x3 inches with 1/4-inch thickness, produced by hot-rolling nonalloy steel. It is not further worked beyond hot-rolling, fitting the scope of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Rolled Steel Lip Channel 5 Inch
> A channel with lipped flanges, hot-rolled from nonalloy steel, 5 inches in size, used in structural applications. It is not further worked beyond hot-rolling, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Rolled Steel Omega Profile 4 Inch
> An omega-shaped track section hot-rolled from nonalloy steel, 4 inches in size, used for framing. It is not further worked beyond hot-rolling, fitting the definition of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Rolled Steel T-Section 5x5x3/8 Inch
> A T-shaped steel section hot-rolled from nonalloy steel, 5-inch flange and stem with 3/8-inch thickness, used in framing and machinery. It is not further worked beyond hot-rolling, qualifying as an angle, shape, or section of heading 72.16.
7216.50.00Hot-Rolled Steel U-Channel 4x2x1/8 Inch
> A U-shaped channel section made from hot-rolled nonalloy steel, measuring 4 inches deep by 2 inches wide with 1/8-inch web thickness. It is not further worked beyond hot-rolling, fitting the scope of angles, shapes, and sections of heading 72.16.
7216.50.00Hot-Rolled Steel Unequal Angle 4x2x5/16 Inch
> An unequal leg L-angle hot-rolled from nonalloy steel, 4x2 inches legs with 5/16-inch thickness, used in stair stringers. It is not further worked beyond hot-rolling, qualifying as an angle, shape, or section of heading 72.16.