Ultra MS1180 Martensitic Steel Coil
Ultra-strength martensitic MS1180 annealed steel coil, cold-rolled to 0.65 mm thickness and 700 mm width. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00. For extreme strength structural auto parts such as B-pillars and roof rails.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the steel is alloy steel
Martensitic steels with alloying elements are classified under heading 7225.
If the thickness exceeds 1 mm
Thicker cold-rolled coils are classified under a different subheading.
If the thickness is less than 0.5 mm
Thinner coils are classified under this subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the martensitic steel is non-alloy; if it contains chromium or other alloying elements above thresholds, it belongs in heading 7225
• Provide a certificate of analysis showing the steel is not clad, plated or coated
• Ensure the product is in coil form and not further worked beyond cold-rolling and annealing
Related Products under Tariff item 7209.17.00
Advanced AHSS 1180 Steel Annealed Coil
Third-generation advanced high-strength steel (AHSS) 1180 MPa annealed coil, cold-rolled to 0.6 mm thickness and 650 mm width. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 because its thickness is between 0.5 mm and 1 mm. Used in high-performance automotive safety components requiring exceptional strength and formability.
Advanced CAHSS Complex Phase Steel Coil
Complex-phase advanced high-strength steel (CAHSS) coil, cold-rolled and annealed to 0.95 mm thickness. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and meets the thickness range of 0.5 mm to 1 mm for tariff item 7209.17.00. Balances strength and formability for truck panels and structural automotive applications.
Advanced High-Strength DP980 Steel Coil
Cold-rolled dual-phase (DP) 980 MPa high-strength steel coil, annealed, with thickness between 0.5 mm and 1 mm and width exceeding 600 mm. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and is classified under tariff item 7209.17.00. Used in automotive structural components requiring high strength and energy absorption.
Advanced Martensitic MS980 Cold-Rolled Steel Coil
Annealed martensitic MS980 steel coil, cold-rolled to 0.8 mm thickness and 800 mm width. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 due to its thickness range. Designed for lightweight vehicle chassis and structural reinforcements requiring ultra-high strength.
Advanced TWIP Steel High-Strength Coil
Twinning-induced plasticity (TWIP) advanced steel coil, cold-rolled to 0.55 mm thickness and annealed. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and meets the thickness range of 0.5 mm to 1 mm for tariff item 7209.17.00. Offers high ductility for complex forming applications in vehicles, such as body panels and crash structures.
Annealed High-Strength Steel Coil for Appliance Housings
Cold-rolled non-alloy steel coil, 0.9 mm thick by 1000 mm wide, high-strength grade with 355 MPa yield after annealing. This flat-rolled product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 due to its thickness range. Used for appliance housings requiring strength and formability.