Advanced CAHSS Complex Phase Steel Coil
Complex-phase advanced high-strength steel (CAHSS) coil, cold-rolled and annealed to 0.95 mm thickness. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and meets the thickness range of 0.5 mm to 1 mm for tariff item 7209.17.00. Balances strength and formability for truck panels and structural automotive applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is greater than 1 mm
Thicker cold-rolled coils are classified under a different subheading.
If the steel contains alloying elements exceeding Chapter 72 thresholds
Alloy steel products are classified under heading 7225.
If the thickness is 3 mm or more
Cold-rolled steel of greater thickness falls under this subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the steel is non-alloy by reviewing the mill certificate; complex-phase steels may contain micro-alloying elements that could affect classification
• Ensure the coil is annealed and not further worked (e.g
• not painted or coated)
• Keep records of the exact thickness and width for CBSA verification
Related Products under Tariff item 7209.17.00
Advanced AHSS 1180 Steel Annealed Coil
Third-generation advanced high-strength steel (AHSS) 1180 MPa annealed coil, cold-rolled to 0.6 mm thickness and 650 mm width. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 because its thickness is between 0.5 mm and 1 mm. Used in high-performance automotive safety components requiring exceptional strength and formability.
Advanced High-Strength DP980 Steel Coil
Cold-rolled dual-phase (DP) 980 MPa high-strength steel coil, annealed, with thickness between 0.5 mm and 1 mm and width exceeding 600 mm. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and is classified under tariff item 7209.17.00. Used in automotive structural components requiring high strength and energy absorption.
Advanced Martensitic MS980 Cold-Rolled Steel Coil
Annealed martensitic MS980 steel coil, cold-rolled to 0.8 mm thickness and 800 mm width. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 due to its thickness range. Designed for lightweight vehicle chassis and structural reinforcements requiring ultra-high strength.
Advanced TWIP Steel High-Strength Coil
Twinning-induced plasticity (TWIP) advanced steel coil, cold-rolled to 0.55 mm thickness and annealed. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and meets the thickness range of 0.5 mm to 1 mm for tariff item 7209.17.00. Offers high ductility for complex forming applications in vehicles, such as body panels and crash structures.
Annealed High-Strength Steel Coil for Appliance Housings
Cold-rolled non-alloy steel coil, 0.9 mm thick by 1000 mm wide, high-strength grade with 355 MPa yield after annealing. This flat-rolled product is in coils, not further worked than cold-rolled, and falls under tariff item 7209.17.00 due to its thickness range. Used for appliance housings requiring strength and formability.
Annealed High-Strength Steel Coil for Furniture Frames
Cold-reduced high-strength steel coil, 0.55 mm x 650 mm, annealed, suitable for heavy-duty furniture reinforcement. This flat-rolled non-alloy steel product is in coils, not further worked than cold-rolled, and meets the thickness range of 0.5 mm to 1 mm for tariff item 7209.17.00. Provides structural support in commercial and residential furniture frames.