Of a thickness exceeding 1 mm but less than 3 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. > In coils, not further worked than cold-rolled (cold-reduced): > Of a thickness exceeding 1 mm but less than 3 mm
Duty Rate (from China)
Products classified under Tariff item 7209.16
Advanced AHSS Martensitic MS1200 Steel Coil
Martensitic 1200 MPa advanced high-strength steel coil, cold-rolled 1.8 mm thick, 1000 mm wide, annealed condition. It falls under this item as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, within the specified thickness range.
7209.16.00Advanced High-Strength DP980 Steel Coil
Cold-rolled dual-phase (DP) 980 MPa high-strength steel coil, thickness 1.5 mm, width 1200 mm, annealed for automotive use. It is classified under this item as a cold-rolled non-alloy steel product within the specified thickness range.
7209.16.00Annealed Cold-Reduced Steel for HVAC Ductwork
Annealed cold-reduced non-alloy steel coil, 1.2 mm thick and 1000 mm wide, continuously annealed for HVAC ductwork fabrication requiring high cleanliness. It is a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled (cold-reduced), and not clad, plated or coated. The thickness of 1.2 mm places it within tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00Annealed Cold-Rolled Steel Coil for Automotive Panels
Annealed cold-rolled non-alloy steel coil, 1.5 mm thick and over 600 mm wide, specifically annealed to achieve uniform microstructure and improved formability for automotive panels. It is a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness of 1.5 mm falls within tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00Annealed CR Steel Coil for Home Appliance Housings
Annealed cold-rolled non-alloy steel coil, 2.0 mm thick and 1200 mm wide, annealed for enhanced ductility, used in refrigerator and washer exteriors. It is a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness of 2.0 mm places it within tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00Annealed High-Strength Steel Coil for Heavy Machinery Frames
Annealed high-strength steel coil for heavy machinery frames, cold-rolled to 1.5-2.5 mm thickness and 800 mm width, of non-alloy steel with yield strength exceeding 275 MPa. It is classified under tariff item 7209.16.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled, with thickness between 1 mm and 3 mm.
7209.16.00Appliance Frame High-Strength Annealed Steel Coil
Appliance frame high-strength annealed steel coil, cold-rolled to 1.6 mm thickness and 700 mm width, with yield strength exceeding 275 MPa, used for washing machine and refrigerator frames. It is classified under tariff item 7209.16.00 as a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Appliance Sheet Cold-Rolled Steel Coil 1.2mm
Cold-rolled non-alloy steel coil, 1.2 mm thick, exceeding 600 mm in width, uncoated and supplied in coils. It is not further worked than cold-rolled, matching the tariff item's description for flat-rolled products of iron or non-alloy steel.
7209.16.00Automotive Grade Annealed High-Strength Steel Coil HSLA-Type
Automotive grade annealed high-strength steel coil of HSLA-type, cold-rolled to 2 mm thickness and 1200 mm width, with yield strength of 290 MPa. It is classified under tariff item 7209.16.00 as a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Automotive Grade Cold-Rolled Steel Coil 2mm
Cold-reduced non-alloy steel coil, 2 mm thick, over 600 mm wide, in coil form without plating or further processing. It is classified under this item as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.16.00Automotive Grade High-Strength Steel CR Coil 1.8 mm
Automotive grade high-strength steel CR coil, cold-reduced to 1.8 mm thickness and 1400 mm width, with minimum yield strength of 275 MPa, used for car body panels and reinforcements. It is classified under tariff item 7209.16.00 as a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Bright Annealed Steel Coil for Electrical Enclosures
Bright annealed cold-rolled steel coil, 2.2 mm thick and 1100 mm wide, with bright annealing in a protective atmosphere for NEMA-rated electrical boxes. It is a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness of 2.2 mm falls within tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00Cold-Rolled Non-Alloy Steel Coil 1.5mm Thick
Flat-rolled non-alloy steel coil, cold-rolled to 1.5 mm thickness, width over 600 mm, supplied in coil form without cladding, plating, or coating. It matches the tariff item's scope for cold-rolled products not further worked.
7209.16.00Construction Grade Annealed Cold-Rolled High-Strength Steel Coil
Construction grade annealed cold-rolled high-strength steel coil, 2.2 mm thick and 900 mm wide, with 280 MPa yield strength, of non-alloy iron/steel. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Construction Grade Cold-Rolled Steel Coil 2.5mm
Non-alloy steel cold-rolled coil, 2.5 mm thick, over 600 mm wide, in coil form without cladding. It fits the tariff item as a cold-reduced flat product of iron or non-alloy steel, not further processed.
7209.16.00DP1000/600 Advanced Dual Phase Steel Coil
Dual-phase 1000/600 MPa advanced high-strength non-alloy steel, 2.2 mm thick cold-rolled coil, 1400 mm width, annealed. It falls under this item as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.16.00DP600 High-Strength Cold-Rolled Steel Coil
DP600 high-strength cold-rolled steel coil, a dual-phase grade, cold-rolled to 1.6 mm thickness and 1300 mm width, with yield strength exceeding 355 MPa. It is classified under tariff item 7209.16.00 as a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Drawer Slide Cold-Rolled Steel Coil 1.6mm
Cold-rolled non-alloy steel coil for drawer slide manufacturing, 1.6 mm gauge, over 600 mm wide, uncoated coils. It precisely matches the tariff item's parameters for cold-reduced flat products.
7209.16.00Elevator Cab Annealed High-Strength Steel Coil
Elevator cab annealed high-strength steel coil, cold-rolled to 2.1 mm thickness and 1100 mm width, with minimum yield strength of 295 MPa, used for elevator car bodies and doors. It is classified under tariff item 7209.16.00 as a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Furniture Frame Cold-Rolled Steel Coil 1.4mm
1.4 mm thick cold-reduced non-alloy steel coil, 610 mm wide, for metal furniture components, in uncoated coil form. It meets all criteria for the tariff item: cold-rolled, thickness 1-3 mm, width over 600 mm.
7209.16.00General Purpose CRCA Steel Coil 2.2mm
CRCA (cold-rolled close annealed) non-alloy steel coil, 2.2 mm thick, 1000 mm wide, basic grade without further work. It falls under the tariff item as cold-rolled in coils, thickness exceeding 1 but under 3 mm.
7209.16.00Grade 80 High-Strength Cold-Rolled Steel Coil
Grade 80 high-strength cold-rolled steel coil, a high-strength low-alloy equivalent non-alloy steel, cold-rolled to 1.2 mm thickness and 1600 mm width, with minimum yield of 550 MPa. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Annealed Cold-Rolled Steel Coil for Automotive Chassis
High-strength annealed cold-rolled steel coil for automotive chassis, flat-rolled of iron or non-alloy steel, cold-rolled to a thickness between 1-3 mm and width over 600 mm, annealed for improved formability. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Annealed CR Steel Coil for Trailer Manufacturing
High-strength annealed CR steel coil for trailer manufacturing, cold-reduced to 1.2-2.8 mm thickness and over 600 mm width, of high-strength non-alloy steel, annealed twin-rolled for uniformity. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Cold-Rolled Steel Coil for Automotive Chassis
High-strength cold-rolled steel coil for automotive chassis, cold-rolled to 1.5 mm thickness and 1200 mm width, with minimum yield point of 355 MPa, of non-alloy steel. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Steel Coil for Agricultural Machinery
High-strength non-alloy steel coil, cold-rolled to a thickness of 2.5 mm and a width of 1100 mm, with a yield strength of 360 MPa. It is supplied in coils and has not been further worked beyond cold reduction, making it suitable for tractor and harvester frames. This product falls under tariff item 7209.16.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, cold-rolled, in coils, of a thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Steel Coil for Construction Equipment Frames
Cold-rolled non-alloy steel coil, 2.2 mm thick and 1500 mm wide, with a yield strength of 380 MPa, intended for heavy equipment frames. It is a flat-rolled product of iron or non-alloy steel, in coils, not clad, plated or coated, and not further worked than cold-rolled. It meets the high-strength steel criteria and falls under tariff item 7209.16.00 for thickness exceeding 1 mm but less than 3 mm.
7209.16.00High-Strength Steel Coil for Wind Turbine Components
Cold-rolled high-strength steel coil, 1.9 mm thick and 1250 mm wide, with a yield point of 370 MPa, used for wind turbine nacelle supports. It is a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness falls within 1-3 mm, so it is classified under tariff item 7209.16.00.
7209.16.00High-Strength Steel CR Coil for Solar Panel Frames
Cold-rolled high-strength steel coil, 2.0 mm thick and 900 mm wide, with a yield strength of 340 MPa, for solar panel mounting frames. It is a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness of 2.0 mm places it within tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00HV500 High-Strength Steel Cold-Rolled Coil
HV500 high-strength steel grade coil, cold-rolled, 2.8 mm thickness and 1000 mm width, with a yield strength of 500 MPa, for armored vehicle panels. It is a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness exceeds 1 mm but is less than 3 mm, so it is classified under tariff item 7209.16.00.
7209.16.00HVAC Duct Cold-Rolled Steel Coil 1.8mm
Cold-rolled non-alloy steel coil for HVAC ductwork fabrication, thickness 1.8 mm, coil width 750 mm, uncoated. It is classified under the tariff item for its cold-rolled coil form and specified dimensions.
7209.16.00HVAC Duct High-Strength Annealed Steel Coil
HVAC duct high-strength annealed steel coil, cold-rolled to 2.4 mm thickness and 1400 mm width, with 285 MPa yield, of non-alloy steel, used for HVAC ductwork fabrication. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Paneling Base Cold-Rolled Steel Coil 1.9mm
Non-alloy cold-rolled steel coil base for architectural paneling, 1.9 mm thick, 1200 mm wide coils, not further worked. It directly corresponds to the tariff item's description.
7209.16.00Q&P980 Quenched and Partitioned Steel Coil
Quenching and partitioning (Q&P) 980 MPa advanced steel, 1.6 mm cold-rolled annealed coil, 1300 mm width. It is classified under this item as a cold-rolled non-alloy steel product within the specified thickness range.
7209.16.00S650MC High-Strength Cold-Rolled Steel Coil
S650MC structural high-strength steel coil, cold-rolled, 2.4 mm thick and 1450 mm wide, with a minimum yield of 650 MPa. It is a flat-rolled product of non-alloy steel, in coils, not further worked than cold-rolled, and not clad, plated or coated. The thickness of 2.4 mm falls within the range of tariff item 7209.16.00 (exceeding 1 mm but less than 3 mm).
7209.16.00Shelf Bracket Steel Coil 2.8mm Cold-Rolled
2.8 mm thick cold-rolled non-alloy steel coil, 800 mm wide, for shelving brackets, supplied in standard coils without coating. It is classified under the tariff item for thickness 1-3 mm cold-rolled coil specifications.
7209.16.00Solar Panel Frame Annealed High-Strength Steel Coil
Solar panel frame annealed high-strength steel coil, cold-rolled to 1.9 mm thickness and 1000 mm width, with minimum 275 MPa yield strength, of non-alloy steel. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Structural High-Strength Annealed Steel Coil for Bridge Components
Structural high-strength annealed steel coil for bridge components, cold-rolled to 1.8 mm thickness and 1500 mm width, of non-alloy steel with 300 MPa yield strength, in coils. It is classified under tariff item 7209.16.00 as a flat-rolled product in coils, not further worked than cold-rolled, with thickness exceeding 1 mm but less than 3 mm.
7209.16.00Ultra High-Strength TRIP980 Annealed Steel Coil
Transformation-induced plasticity (TRIP) 980 MPa ultra high-strength steel, cold-rolled to 2.0 mm thickness, 1500 mm width, annealed. It falls under this item as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.16.00Ultra TWIP Steel Coil 980 MPa Annealed
Ultra TWIP steel coil, a twinning-induced plasticity ultra high-strength steel, cold-rolled to 1.2 mm thickness and 1100 mm width, annealed. It falls under tariff item 7209.16.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm.