Of a thickness of 3 mm or more but less than 4.75 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. > Other, in coils, not further worked than hot-rolled: > Of a thickness of 3 mm or more but less than 4.75 mm
Duty Rate (from China)
Products classified under Tariff item 7208.38
355 Yield High-Strength Machinery Steel Coil
355 MPa yield hot-rolled steel coil for industrial machinery, 3.3 mm gauge, 1,100 mm width, non-alloy high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Base material for frames and structural components.
7208.38.00460 MPa High-Strength Steel Coil
Ultra-high-strength 460 MPa yield hot-rolled steel coil, 3.2 mm thick, 1,650 mm wide, non-alloy steel. It is hot-rolled, in coils, not further worked, and matches the tariff item's thickness range. Used in advanced engineering applications.
7208.38.00AH36 High-Strength Shipbuilding Steel Coil
ABS AH36 grade hot-rolled steel coil for shipbuilding, 3.4 mm thickness, 1,700 mm width, minimum yield 355 MPa. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Meets marine structural standards.
7208.38.00ASTM A1011 Hot-Rolled Steel Coil 4mm Untrimmed
ASTM A1011 commercial quality hot-rolled steel coil, 4 mm thick and over 600 mm wide, with untrimmed mill edges. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00ASTM A572 Grade 50 Steel Coil
ASTM A572 Gr.50 hot-rolled steel coil, 4.2 mm thick, 1,000 mm wide, with 345-450 MPa yield, qualifying as high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Applied in structural steel fabrication.
7208.38.00Automotive Grade HR Coil 3.6mm Thick
Automotive-grade hot-rolled non-alloy steel coil, 3.6 mm thick and 1700 mm wide, supplied in coils without cladding, plating, or coating, and not further worked beyond hot rolling. It falls under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Commercial Quality Hot-Rolled Steel Coil 3.4mm for Storage Tanks
Commercial quality hot-rolled non-alloy steel coil, 3.4 mm thick, over 600 mm wide, in coils, not clad, plated, or coated. It is not further worked beyond hot-rolling, matching the tariff item's thickness range of 3 mm to less than 4.75 mm. Used in fabricating storage tanks.
7208.38.00Commercial Quality HR Coil 4.5mm Mill Edge
Commercial quality hot-rolled non-alloy steel coil, 4.5 mm thick with untrimmed mill edges and 1,000 mm wide, for stamping applications. It is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00Commercial Quality HR Steel Coil 4mm
Commercial-quality hot-rolled non-alloy steel coil, 4 mm thick and 1250 mm wide, not clad or coated, in coil form and not further worked. It is classified under tariff item 7208.38.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Deep Drawing HR Coil 3.9mm Thick
Deep-drawing-quality hot-rolled non-alloy steel coil, 3.9 mm thick and 1650 mm wide, hot-rolled in coils without further treatments. It is classified under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Drawing Quality Hot-Rolled Coil 3.8mm
Drawing-quality (DQ) hot-rolled steel coil of non-alloy steel, 3.8 mm thick and 1800 mm wide, in coils, hot-rolled only without further treatments. It is classified under tariff item 7208.38.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Drawing Quality Hot-Rolled Steel Coil 3.1mm for Furniture Frames
Drawing quality (DQ) hot-rolled non-alloy steel coil, 3.1 mm thick, over 600 mm wide, not further worked or coated. It is supplied in coils and matches the tariff item's thickness range (3 mm to less than 4.75 mm). Used in deep drawing processes for furniture frames.
7208.38.00Drawing Quality Hot-Rolled Steel Coil 3.6mm Untrimmed
Drawing quality (DQ) hot-rolled steel coil for deep drawing, 3.6 mm thick with mill untrimmed edges, in non-alloy steel. It is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00E355C High-Strength Steel Coil
EN 10210 E355C hot-rolled coil, 3.7 mm thickness, 1,200 mm width, 355 MPa yield high-strength steel. It is uncoated, hot-rolled, in coils, and fits the tariff item's thickness range. Used as pipe manufacturing feedstock.
7208.38.00General Purpose Hot-Rolled Coil 4.2mm
General-purpose non-alloy hot-rolled steel coil, 4.2 mm thickness and 1200 mm wide, supplied in coil form without coatings or further processing. It is classified under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Grade 355MPA Construction Steel Coil
Non-alloy high-strength steel coil for construction, 3.6 mm gauge, 1,600 mm width, certified 355 MPa minimum yield. It is hot-rolled, in coils, not further worked, and fits the tariff item's thickness range. Used in construction applications.
7208.38.00Grade 50W Weathering Steel Coil
ASTM A588 Grade 50W high-strength weathering steel coil, 4.4 mm thick, 1,500 mm wide, yield 345+ MPa. It is hot-rolled, in coils, not further worked, and fits the tariff item's thickness range. Used for corrosion-resistant structural applications.
7208.38.00High-Strength Hot-Rolled Steel Coil HR450
High-strength hot-rolled steel coil in non-alloy steel, 3.5 mm thick and 1,200 mm wide, with a minimum yield strength of 355 MPa. It is hot-rolled, in coils, and not further worked, clad, plated or coated, meeting the definition of flat-rolled products of iron or non-alloy steel under this tariff item.
7208.38.00High-Strength HR400 Steel Coil for Automotive
HR400 grade hot-rolled steel coil optimized for automotive chassis, 3.1 mm thick and 1,450 mm wide, with a minimum yield strength of 400 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00High-Strength Steel Coil 3.5mm for Bridges
High-strength steel coil, 3.5 mm thick and 1,250 mm wide, with a yield strength of 365 MPa, hot-rolled in non-alloy steel for bridge fabrication. It is in coils, not further worked, and not clad, plated or coated, meeting the criteria for this tariff item.
7208.38.00Hot-Rolled HRPO Steel Coil 3.5mm Thick Untrimmed Edges
Hot-rolled, pickled and oiled (HRPO) flat-rolled product of non-alloy steel, in coils, 3.5 mm thick and over 600 mm wide, with untrimmed mill edges. It is hot-rolled and not further worked beyond pickling and oiling, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00Hot-Rolled Low Carbon Steel Coil 3.6mm for Shipbuilding Plates
Low carbon non-alloy steel hot-rolled coil, 3.6 mm thick, 1,500 mm wide, uncoated and in coil form, only hot-rolled. It precisely matches the tariff item's thickness and processing criteria. Suited for ship hull plating and marine applications.
7208.38.00Hot-Rolled Nonalloy Steel Coil 3.5mm Thick for General Construction
Hot-rolled flat-rolled steel coil of non-alloy steel, 3.5 mm thick, over 600 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond hot-rolling, fitting the tariff item's specifications. Used in general construction applications.
7208.38.00Hot-Rolled Steel Coil 4.0mm Thick for Pipe Manufacturing
Non-alloy steel hot-rolled coil at 4.0 mm thickness, over 600 mm wide, not clad or coated, and not further worked beyond hot-rolling. It meets the tariff item's exact thickness range (3-4.75 mm) and form. Primarily used in pipe manufacturing.
7208.38.00Hot-Rolled Steel Service Coil 3.9mm for Trailer Manufacturing
Service center quality hot-rolled non-alloy steel coil, 3.9 mm thickness, 900 mm wide minimum, in coils, uncoated. It meets all criteria for the tariff item, including no further working beyond hot-rolling. Common in trailer chassis manufacturing.
7208.38.00HRPO Hot-Rolled Steel Coil 3.5mm Thick
Hot-rolled steel coil of non-alloy steel, 3.5 mm thick and 1500 mm wide, in coil form without cladding, plating, or coating, and not further worked beyond hot-rolling. It is classified under tariff item 7208.38.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00HRPO Steel Coil 3.2mm Thick for Automotive Panel Stamping
Hot-rolled pickled and oiled (HRPO) non-alloy steel coil, 3.2 mm thick, width exceeding 600 mm, in coil form without plating or cladding. While pickled and oiled, this surface cleaning does not constitute 'further worked' for tariff purposes, so it fits the item. Used in automotive panel stamping.
7208.38.00HR Steel Coil 3.25mm Thick ASTM A36 Untrimmed
ASTM A36 structural quality hot-rolled steel coil, 3.25 mm thick with untrimmed edges and 1,500 mm wide. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00Mill Edge Hot-Rolled Carbon Steel Coil 3.2mm Thick
Standard mill edge carbon steel hot-rolled coil, 3.2 mm thick and 1,200 mm wide, in non-alloy composition for structural use. It is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00Mill Edge HR Steel Coil 3.1mm
Mill-edge hot-rolled non-alloy steel coil with 3.1 mm thickness and 1550 mm width, not trimmed, uncoated, in coils. It is classified under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Nonalloy Steel Hot Band Coil 3.8mm for Heavy Machinery Frames
Hot band coil of non-alloy steel, 3.8 mm thick, width 1,200 mm, in coiled form, hot-rolled only without additional processing. It classifies under the tariff item for its precise thickness and uncoated, unclad state. Used in heavy machinery frames.
7208.38.00Pickled Hot-Rolled Steel Coil 3.2mm
Pickled hot-rolled non-alloy steel coil, 3.2 mm thickness and 1600 mm width, supplied in coils without further working beyond basic hot-rolling and pickling. It is classified under tariff item 7208.38.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Q355B High-Strength Steel Coil
Q355B hot-rolled steel coil per GB/T 1591, 3.9 mm thick and 1,400 mm wide, with a minimum yield strength of 355 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00S355JR High-Strength Structural Steel Coil
S355JR hot-rolled steel coil per EN 10025-2, 3.8 mm thick and 1,800 mm wide, with a yield strength exceeding 355 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00S460NL High-Strength Steel Coil
S460NL normalized steel coil per EN 10025-3, 4.0 mm thick and 1,300 mm wide, with a yield strength of 460 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00SAE J410 Grade 355 Hot-Rolled Steel Coil
Hot-rolled steel coil per SAE J410 specifications, 3.2 mm thick and 1,500 mm wide, with a minimum yield strength of 355 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00SM490A High-Strength Steel Coil
SM490A hot-rolled steel coil per JIS G3106, 4.1 mm thick and 1,550 mm wide, with a minimum yield strength of 355 MPa. This non-alloy steel product is hot-rolled, in coils, and not further worked, fitting the tariff item for flat-rolled products of iron or non-alloy steel.
7208.38.00Structural Hot-Rolled Steel Coil 3.4mm
Hot-rolled structural-quality non-alloy steel coil, 3.4 mm thickness and 1400 mm wide, uncoated and in coil, not further worked. It is classified under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
7208.38.00Unpickled Hot-Rolled Steel Coil 3.8mm Mill Edge
Black (unpickled) hot-rolled non-alloy steel coil with mill edges, 3.8 mm thick and 900 mm wide, for heavy fabrication. It is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.