Nonalloy Steel Hot Band Coil 3.8mm for Heavy Machinery Frames
Hot band coil of non-alloy steel, 3.8 mm thick, 1,200 mm wide, in coiled form, hot-rolled only without additional processing. It classifies under tariff item 7208.38.00 for its precise thickness and uncoated, unclad state, used in heavy machinery frames.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked beyond hot-rolling
Additional processing changes classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the product is a hot band coil with no further processing
• Verify the width exceeds 600 mm and thickness is within 3 to 4.75 mm
• Keep mill certificates to demonstrate non-alloy composition and hot-rolled state
Related Products under Tariff item 7208.38.00
ASTM A1011 Hot-Rolled Steel Coil 4mm Untrimmed
ASTM A1011 commercial quality hot-rolled steel coil, 4 mm thick, over 600 mm wide with untrimmed edges, suitable for general fabrication. It is classified under tariff item 7208.38.00 as a non-alloy steel product in coils, hot-rolled and not further worked.
Commercial Quality Hot-Rolled Steel Coil 3.4mm for Storage Tanks
Commercial quality hot-rolled non-alloy steel coil, 3.4 mm thick and over 600 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond hot-rolling, which places it under tariff item 7208.38.00 for flat-rolled products of a thickness of 3 mm or more but less than 4.75 mm.
Commercial Quality HR Coil 4.5mm Mill Edge
Commercial quality hot-rolled non-alloy steel coil, 4.5 mm thickness, untrimmed mill edges, 1000 mm wide for stamping applications. It meets tariff item 7208.38.00 criteria: hot-rolled only, in coils, 3 to less than 4.75 mm thick, over 600 mm wide, and uncoated.
Drawing Quality Hot-Rolled Steel Coil 3.1mm for Furniture Frames
Drawing quality (DQ) non-alloy hot-rolled steel coil, 3.1 mm thick and over 600 mm wide, not further worked or coated. Its thickness within the 3 mm to less than 4.75 mm range and coil form qualify it for tariff item 7208.38.00.
Drawing Quality Hot-Rolled Steel Coil 3.6mm Untrimmed
Drawing quality (DQ) hot-rolled steel coil for deep drawing, 3.6 mm thick with mill untrimmed edges, non-alloy. It falls under tariff item 7208.38.00 as flat-rolled iron/non-alloy steel, hot-rolled coils, with exact thickness and edge condition.
Hot-Rolled HRPO Steel Coil 3.5mm Thick Untrimmed Edges
Hot-rolled, pickled and oiled (HRPO) flat-rolled product of non-alloy steel, in coils, with a thickness of 3.5 mm and width over 600 mm, featuring untrimmed mill edges. It falls under tariff item 7208.38.00 because pickling and oiling do not constitute further working.