Of a thickness of less than 3 mm
Live horses, asses, mules and hinnies. > Of a thickness of less than 3 mm > Of a thickness of less than 3 mm
Duty Rate (from China)
Products classified under Tariff item 7208.39.00
ASTM A36 Hot-Rolled Steel Coil 2.4mm
> ASTM A36 specification hot-rolled carbon steel coil, 2.4 mm nominal thickness, width exceeding 600 mm, in coil form, not further processed. This nonalloy steel coil meets the criteria for hot-rolled flat products under 3 mm thickness and is classified under this tariff item.
Commercial Quality Hot-Rolled Steel Coil 1.5mm Thick
> Commercial quality nonalloy steel hot-rolled coil, 1.5 mm thick and 1,500 mm wide, in coils, uncoated and not further worked beyond hot rolling. This flat-rolled product meets the definition of flat-rolled products of iron or nonalloy steel of a width exceeding 600 mm and a thickness of less than 3 mm, and is not clad, plated or coated.
Commercial Quality Hot-Rolled Steel Coil 2.0mm
> Commercial quality (CQ) hot-rolled nonalloy steel coil, 2.0 mm thick and 1,500 mm wide, not clad or coated, for general sheet metal work. This flat-rolled product meets the definition of hot-rolled nonalloy steel coils under 3 mm thickness and over 600 mm width.
Drawing Quality Hot-Rolled Steel Coil 1.2mm Thick
> Drawing quality (DQ) nonalloy steel hot-rolled coil, 1.2 mm thick and 800 mm wide, in coils, uncoated and not further worked. This flat-rolled product is suitable for deep drawing and meets the criteria of hot-rolled flat-rolled products of nonalloy steel under 3 mm thickness and over 600 mm width.
Grade 50W Hot-Rolled Steel Coil
> Weathering-resistant Grade 50W high-strength steel coil, hot-rolled, 2.75 mm thick and 1,200 mm wide, with a yield strength of 345 MPa. This nonalloy steel coil is not clad or coated and meets the high-strength steel criteria (yield ≥275 MPa) for classification under this tariff item.
High-Strength Hot-Rolled Steel Coil HR450
> Hot-rolled steel coil of nonalloy steel with a minimum yield strength of 355 MPa, thickness under 3 mm, and width over 600 mm, supplied in coils without cladding, plating, or coating. This high-strength steel meets the yield threshold of ≥275 MPa for classification under this tariff item.
High-Strength SAPC440 Steel Coil
> Hot-rolled SAPC440 steel coil for pressed auto parts, 2.2 mm thick and 1,650 mm wide, with a minimum yield strength of 440 MPa. This nonalloy steel coil is uncoated and not further worked, qualifying as high-strength steel (yield ≥275 MPa) under this tariff item.
Hot-Rolled Low Carbon Steel Coil 2.75mm for HVAC Ducting
> Low carbon nonalloy steel hot-rolled coil, 2.75 mm thick and over 1,000 mm wide, in coils, uncoated and not further worked. This product is intended for HVAC duct fabrication and qualifies as a flat-rolled product of nonalloy steel under 3 mm thickness, exceeding 600 mm width.
Hot-Rolled Nonalloy Steel Coil 2.5mm Thick for Automotive Panels
> Hot-rolled nonalloy steel coil, 2.5 mm thick and exceeding 600 mm wide, in coils, not further worked beyond hot rolling, unclad, unplated, and uncoated. This flat-rolled product is used for automotive panels and meets the definition of hot-rolled flat products under 3 mm thickness.
Hot-Rolled Steel Coil 2.0mm for Construction Framing
> Nonalloy steel hot-rolled coil, 2.0 mm thick and 1,200 mm wide, in coils, not further worked. This product is used for light structural framing in construction and qualifies as a flat-rolled product of nonalloy steel under 3 mm thickness and over 600 mm width.
HR400Y Automotive Steel Coil
> Hot-rolled dual-phase HR400Y steel coil for lightweight vehicles, 1.8 mm thick and 1,400 mm wide, with a yield strength exceeding 275 MPa. This nonalloy steel coil is in coils without further processing, qualifying as high-strength steel under this tariff item.
HRPO Steel Coil 1.8mm Thick for Appliance Manufacturing
> Hot-rolled pickled and oiled (HRPO) nonalloy steel coil, 1.8 mm thick and over 600 mm wide, in coils. The oiling is a protective measure and does not constitute further working, so it remains classified as hot-rolled flat products under 3 mm thickness.
Nonalloy Steel Hot Band Coil 2.2mm for Pipe Production
> Hot band (directly from hot-rolling mill) nonalloy steel coil, 2.2 mm thick and 900 mm wide, unclad and uncoated, for welded pipe manufacturing. This flat-rolled product is not further worked and meets the criteria for hot-rolled products under 3 mm thickness.
S355MC Hot-Rolled High-Strength Steel Coil
> EN 10025-4 compliant S355MC structural steel coil, hot-rolled, 2.8 mm thick and 1,800 mm wide, with a minimum yield strength of 355 MPa. This nonalloy steel coil is not clad or coated and qualifies as high-strength steel (yield ≥275 MPa) under this tariff item.
SAE J2745 HR460Y Hot-Rolled Steel Coil
> Automotive-grade hot-rolled steel coil meeting SAE J2745 HR460Y specification, with yield strength exceeding 275 MPa, thickness 2.5 mm, and width 1,500 mm, in coils not further worked. This nonalloy steel coil qualifies as high-strength steel under this tariff item.