Commercial Quality Hot-Rolled Steel Coil 1.5mm Thick
Commercial quality hot-rolled non-alloy steel coil, 1.5 mm thick and 1,500 mm wide, supplied in coils without any cladding, plating, or coating. It is not further worked beyond hot rolling, making it a flat-rolled product of iron or non-alloy steel of a width exceeding 600 mm and a thickness of less than 3 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 3 mm or more but less than 4.75 mm
Different thickness range within the same subheading for hot-rolled coils.
If the coil has patterns in relief from rolling
Patterned hot-rolled products are classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil is not clad, plated, or coated, as that would change classification
• Declare the exact thickness and width to confirm it falls under the less than 3 mm provision
• Keep mill certificates showing non-alloy composition for CBSA verification
Related Products under Tariff item 7208.39.00
980Y1000 Yield Steel Coil
A hot-rolled coil of advanced high-strength steel (HSS) with a minimum yield strength of 980 MPa, a thickness of less than 3 mm, and a width of 600 mm or more. It is a flat-rolled product of non-alloy steel, not clad, plated or coated, and not further worked than hot-rolled. It qualifies as an 'advanced' high-strength steel under statistical note 4 of Chapter 72, placing it in tariff item 7208.39.00.
Advanced BH580 Bake-Hardenable Steel Coil
A hot-rolled bake-hardenable (BH580) advanced high-strength steel coil with a yield strength of 390 MPa minimum, rising after baking. It has a thickness of less than 3 mm and a width of 600 mm or more, and is a flat-rolled product of non-alloy steel, not further worked than hot-rolled. It is classified as advanced HSS under statistical note 4 of Chapter 72, fitting tariff item 7208.39.00.
Advanced High-Strength DP980 Steel Coil
A hot-rolled flat-rolled steel coil of non-alloy steel, with a width over 600 mm and a thickness under 3 mm. It is a dual-phase (DP980) grade with a minimum yield point of 695 MPa, qualifying as advanced high-strength steel under statistical note 4 of Chapter 72. It is not clad, plated or coated, and not further worked than hot-rolled, placing it in tariff item 7208.39.00.
Advanced HSS S980MC Steel Coil
A hot-rolled coil of S980MC structural advanced high-strength steel, with a thickness of less than 3 mm and a width of 600 mm or more. It is a flat-rolled product of non-alloy steel, not clad, plated or coated, and not further worked than hot-rolled. It qualifies as advanced HSS under statistical note 4 of Chapter 72, fitting tariff item 7208.39.00.
Advanced Martensitic MS1200 Steel Coil
A hot-rolled coil of martensitic advanced high-strength steel (MS1200) with a minimum yield of 1050 MPa. It is a flat-rolled product of non-alloy steel, with a thickness of less than 3 mm and a width of 600 mm or more, not further worked than hot-rolled. It qualifies as 'advanced' HSS under statistical note 4 of Chapter 72, placing it in tariff item 7208.39.00.
AHSS 980R Class 2 Steel Coil
A hot-rolled coil of AHSS 980R steel meeting IATP Class 2 specifications, with a thickness of less than 3 mm and a width of 600 mm or more. It is a flat-rolled product of non-alloy steel, not further worked than hot-rolled, and qualifies as advanced HSS under statistical note 4 of Chapter 72. It is classified under tariff item 7208.39.00.