Drawing Quality Hot-Rolled Coil 3.8mm
Drawing-quality (DQ) hot-rolled steel coil of non-alloy steel, 3.8 mm thick and 1800 mm wide, in coils, hot-rolled only without further treatments. It is classified under tariff item 7208.38.00 as a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 4.75 mm or more
Hot-rolled coils of non-alloy steel, 600 mm or more wide, with a thickness of 4.75 mm or more are classified under this other subheading.
If the thickness is less than 3 mm
Hot-rolled coils of non-alloy steel, 600 mm or more wide, with a thickness of less than 3 mm fall under this subheading.
If the product is not in coils and has a thickness of 3 mm or more but less than 4.75 mm
Hot-rolled flat-rolled products of non-alloy steel, not in coils, with this thickness range are classified under this subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the coil is not further worked beyond hot-rolling; pickling, for example, may still be acceptable but other treatments could change the tariff classification
• Maintain documentation showing the steel is non-alloy and the exact dimensions, as CBSA may verify width and thickness
• Be aware that anti-dumping or countervailing duties may apply to certain steel products from specific countries
Related Products under Tariff item 7208.38.00
355 Yield High-Strength Machinery Steel Coil
355 MPa yield hot-rolled steel coil for industrial machinery, 3.3 mm gauge, 1,100 mm width, non-alloy high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Base material for frames and structural components.
460 MPa High-Strength Steel Coil
Ultra-high-strength 460 MPa yield hot-rolled steel coil, 3.2 mm thick, 1,650 mm wide, non-alloy steel. It is hot-rolled, in coils, not further worked, and matches the tariff item's thickness range. Used in advanced engineering applications.
AH36 High-Strength Shipbuilding Steel Coil
ABS AH36 grade hot-rolled steel coil for shipbuilding, 3.4 mm thickness, 1,700 mm width, minimum yield 355 MPa. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Meets marine structural standards.
ASTM A1011 Hot-Rolled Steel Coil 4mm Untrimmed
ASTM A1011 commercial quality hot-rolled steel coil, 4 mm thick and over 600 mm wide, with untrimmed mill edges. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
ASTM A572 Grade 50 Steel Coil
ASTM A572 Gr.50 hot-rolled steel coil, 4.2 mm thick, 1,000 mm wide, with 345-450 MPa yield, qualifying as high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Applied in structural steel fabrication.
Automotive Grade HR Coil 3.6mm Thick
Automotive-grade hot-rolled non-alloy steel coil, 3.6 mm thick and 1700 mm wide, supplied in coils without cladding, plating, or coating, and not further worked beyond hot rolling. It falls under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.