Commercial Quality HR Coil 4.5mm Mill Edge
Commercial quality hot-rolled non-alloy steel coil, 4.5 mm thickness, untrimmed mill edges, 1000 mm wide for stamping applications. It meets tariff item 7208.38.00 criteria: hot-rolled only, in coils, 3 to less than 4.75 mm thick, over 600 mm wide, and uncoated.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cut to length and not in coils
Non-coil flat-rolled products are classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the coil is not further worked beyond hot-rolling
• Verify the thickness is within the specified range using a micrometer
• Provide commercial quality certification to support the classification
Related Products under Tariff item 7208.38.00
ASTM A1011 Hot-Rolled Steel Coil 4mm Untrimmed
ASTM A1011 commercial quality hot-rolled steel coil, 4 mm thick, over 600 mm wide with untrimmed edges, suitable for general fabrication. It is classified under tariff item 7208.38.00 as a non-alloy steel product in coils, hot-rolled and not further worked.
Commercial Quality Hot-Rolled Steel Coil 3.4mm for Storage Tanks
Commercial quality hot-rolled non-alloy steel coil, 3.4 mm thick and over 600 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond hot-rolling, which places it under tariff item 7208.38.00 for flat-rolled products of a thickness of 3 mm or more but less than 4.75 mm.
Drawing Quality Hot-Rolled Steel Coil 3.1mm for Furniture Frames
Drawing quality (DQ) non-alloy hot-rolled steel coil, 3.1 mm thick and over 600 mm wide, not further worked or coated. Its thickness within the 3 mm to less than 4.75 mm range and coil form qualify it for tariff item 7208.38.00.
Drawing Quality Hot-Rolled Steel Coil 3.6mm Untrimmed
Drawing quality (DQ) hot-rolled steel coil for deep drawing, 3.6 mm thick with mill untrimmed edges, non-alloy. It falls under tariff item 7208.38.00 as flat-rolled iron/non-alloy steel, hot-rolled coils, with exact thickness and edge condition.
Hot-Rolled HRPO Steel Coil 3.5mm Thick Untrimmed Edges
Hot-rolled, pickled and oiled (HRPO) flat-rolled product of non-alloy steel, in coils, with a thickness of 3.5 mm and width over 600 mm, featuring untrimmed mill edges. It falls under tariff item 7208.38.00 because pickling and oiling do not constitute further working.
Hot-Rolled Low Carbon Steel Coil 3.6mm for Shipbuilding Plates
Low carbon non-alloy steel hot-rolled coil, 3.6 mm thick and 1,500 mm wide, uncoated and in coil form, only hot-rolled. It matches the thickness and processing criteria of tariff item 7208.38.00, suitable for ship hull plating and marine applications.