Of a thickness of less than 3 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. > Other, in coils, not further worked than hot-rolled: > Of a thickness of less than 3 mm > Of a thickness of less than 3 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7208.3
ASTM A1011 HR Coil 13mm Thick Nonalloy
ASTM A1011 hot-rolled non-alloy steel coil, 13 mm thick and over 600 mm wide, for exposed structural use. It is not coated and not further worked, fitting the tariff item's 'other' category for thick hot-rolled coils.
7208.36.00Heavy Gauge Hot-Rolled Carbon Steel Coil 25mm
Heavy 25 mm thick carbon steel hot-rolled coil, non-alloy, width 2000 mm, for forging blanks. It is not clad or coated and not further worked, matching the tariff item's 'other' category.
7208.36.00Heavy Gauge Hot-Rolled Steel Coil 20mm Thick for Pressure Vessels
Heavy gauge hot-rolled non-alloy steel coil, 20 mm thick and 1800 mm wide, uncoated and not further worked beyond hot-rolling. Designed for fabricating pressure vessel shells, it meets the tariff item's requirement of thickness exceeding 10 mm and coil form.
7208.36.00Heavy Hot-Rolled Nonalloy Coil 14mm for Wind Tower Bases
Hot-rolled non-alloy steel coil, 14 mm thick and 1700 mm wide, for wind turbine tower bases. It is uncoated and not further worked, fitting the tariff item's scope for thick hot-rolled coils.
7208.36.00High-Strength Hot-Rolled Steel Coil for Heavy Machinery Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy machinery frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Mining Conveyor Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy-duty mining conveyor frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Offshore Platform Fabrication
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for offshore platform fabrication. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Wind Turbine Towers
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for wind turbine towers. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Bridge Girder Construction
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for bridge girder construction. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Crane Boom Manufacturing
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for crane boom manufacturing. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Heavy Dump Truck Chassis
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy dump truck chassis. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Heavy Excavator Base Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy excavator base frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel for Shipbuilding Hull Plates
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for shipbuilding hull plates. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled A283 Grade C Steel Coil 11mm Thick
ASTM A283 Grade C low-carbon non-alloy steel coil, hot-rolled to 11 mm thickness and width exceeding 600 mm, not clad or coated. It meets the tariff item's criteria for 'other' thick hot-rolled coils.
7208.36.00Hot-Rolled A572 Grade 42 Steel Coil 10.5mm
Hot-rolled steel coil, 10.5 mm thick and over 600 mm wide, made of ASTM A572 Grade 42 high-strength low-alloy but non-alloy equivalent steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for crane manufacturing. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled ASTM A36 Steel Coil 12mm Thick
Flat-rolled coil of non-alloy steel meeting ASTM A36 specifications, 12 mm thick and over 600 mm wide, produced via hot-rolling without cladding, plating, or coating. It falls under the tariff item's 'other' category.
7208.36.00Hot-Rolled Coil 12.5mm for Heavy Equipment Manufacturing
Hot-rolled non-alloy steel coil, 12.5 mm thick and 1200 mm wide, for heavy equipment chassis. It is uncoated and not further worked, matching the tariff item's criteria for thickness over 10 mm and coil form.
7208.36.00Hot-Rolled Mild Steel Coil 12.7mm for Ship Plate
Mild steel hot-rolled coil normalized for shipbuilding, 12.7 mm thick and 1800 mm wide, non-alloy and not further worked than hot-rolled. It is covered by the tariff item's 'other' category for thick coils.
7208.36.00Hot-Rolled Nonalloy Steel Coil 12mm Thick for Shipbuilding
Flat-rolled non-alloy steel, hot-rolled in coils, 12 mm thick and over 600 mm wide, not clad, plated, or coated, and not further worked beyond hot-rolling. Suitable for shipbuilding applications.
7208.36.00Hot-Rolled Q235B Steel Coil 16mm for Construction
Hot-rolled steel coil, 16 mm thick and 1600 mm wide, made of GB/T 700 Q235B mild steel. It is non-alloy steel, not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for building frameworks. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled S275JR Carbon Steel Coil 15mm
Hot-rolled steel coil, 15 mm thick and over 600 mm wide, made of EN 10025 S275JR carbon steel. It is non-alloy steel, not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for structural applications. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled SS400 Steel Coil 20mm Thick
Hot-rolled steel coil, 20 mm thick and 1500 mm wide, made of JIS G3101 SS400 non-alloy structural steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for bridges and heavy structures. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled St37-2 Steel Coil 14mm Thick
Hot-rolled steel coil, 14 mm thick and 1200 mm wide, made of DIN 17100 St37-2 structural non-alloy steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for boiler fabrication and general structural use. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled Steel Coil 11mm Thick for Bridge Construction
Flat-rolled non-alloy steel coil, hot-rolled to 11 mm thickness and 1500 mm width, not further worked, for bridge girders. It meets the tariff item's requirements for thickness exceeding 10 mm and coil form.
7208.36.00HRPO Steel Coil 15mm Thick for Heavy Machinery Bases
Hot-rolled non-alloy steel coil, 15 mm thick and over 600 mm wide, pickled and oiled. Pickling and oiling are basic surface treatments that do not constitute further working, so it remains classified as not further worked than hot-rolled.
7208.36.00Industrial Hot-Rolled Steel Coil 18mm for Crane Manufacturing
Hot-rolled non-alloy steel coil, 18 mm thick and 2000 mm wide, for crane boom fabrication. It is free of cladding, coating, and further working, matching the tariff item's specifications.
7208.36.00Nonalloy Steel Coil 13mm Thick for Offshore Platform Structures
Hot-rolled coil of non-alloy steel, 13 mm thick and 1600 mm wide, for offshore platform structures. It meets all criteria: thickness over 10 mm, coil form, and no further working beyond hot-rolling.
7208.36.00Structural Hot-Rolled Steel Coil 16mm Thick for Building Frameworks
Hot-rolled non-alloy steel coil, 16 mm thick and 1400 mm wide, for structural I-beams in buildings. It is not further worked and has no surface treatments, fitting the tariff item's scope.
7208.36.00Thick Nonalloy HR Steel Coil 25mm for Mining Equipment
Heavy gauge hot-rolled non-alloy steel coil, 25 mm thick and 1900 mm wide, for mining equipment. It is not further worked and has no cladding or coating, matching the tariff item's requirements.
7208.37.00ASTM A36 Hot-Rolled Steel Coil 6mm Thick
ASTM A36 hot-rolled steel coil, 6 mm thick and 1,500 mm wide, made from non-alloy A36 grade steel. Supplied in coil form without cladding, plating, or coating, it meets the tariff item's requirements for flat-rolled non-alloy steel products.
7208.37.00ASTM A570 Grade 33 Steel Coil 4.8mm Thick
ASTM A570 Grade 33 steel coil, 4.8 mm thick, hot-rolled non-alloy steel with an untreated surface. The coil width exceeds 600 mm, and the product is not further worked, fitting the tariff item for other hot-rolled non-alloy steel flat products.
7208.37.00Automotive Chassis High-Strength Steel Coil
Hot-rolled non-alloy steel coil, 5.2 mm thick and 900 mm wide, high-strength with a yield point of at least 355 MPa, not clad, plated, or coated, in coils. It is not further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Commercial Quality Hot-Rolled Steel Coil 9.5mm
Commercial quality hot-rolled steel coil, 9.5 mm thick and 1,600 mm wide, made from non-alloy steel. Not plated or further worked, it falls under the tariff item for other hot-rolled coils of iron or non-alloy steel in the 4.75–10 mm thickness range.
7208.37.00Construction Crane Boom High-Strength Steel Coil
Hot-rolled steel coil, 6.8 mm thick and 1000 mm wide, made of non-alloy high-strength steel with a yield strength of 380 MPa, in coils with no further working. It is not clad, plated, or coated. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Drawing Quality Hot-Rolled Steel Coil 6.5mm
Drawing quality hot-rolled steel coil, 6.5 mm gauge and 1,200 mm width, made from non-alloy steel. No coatings or cladding, and not further worked, it fits the tariff item for other hot-rolled coils of iron or non-alloy steel in the specified thickness range.
7208.37.00Grade 50 Hot-Rolled Structural Steel Coil 7mm
Grade 50 hot-rolled structural steel coil, 7 mm thick and 1,800 mm wide, made from ASTM A709 Grade 50 non-alloy steel. Uncoated and unclad, it meets the tariff item's criteria for flat-rolled iron or non-alloy steel, hot-rolled, in coils, 4.75–10 mm thick.
7208.37.00Heavy Duty Trailer Frame High-Strength Steel
Hot-rolled steel coil, 5.5 mm thick and 750 mm wide, made of non-alloy high-strength steel with a minimum yield of 355 MPa, not further worked. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Heavy Hot-Rolled Mild Steel Coil 4.8mm
Heavy hot-rolled mild steel coil, 4.8 mm thick and 1000 mm wide, made of low-carbon non-alloy steel. It is uncoated and supplied in coils, suitable for automotive frame components. This product falls under tariff item 7208.37.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, not clad, plated or coated, and in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Hot-Rolled Steel Coil for Heavy Machinery Frames
Hot-rolled steel coil of non-alloy steel, 6 mm thick and 1200 mm wide, meeting high-strength steel criteria with a minimum yield point of 355 MPa for thicknesses of 3 mm or more. It is not further worked and is supplied in coils. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel Coil for Bridge Girder Fabrication
Flat-rolled hot-rolled steel coil, 8.5 mm thick and 1500 mm wide, made of non-alloy steel with a yield strength exceeding 355 MPa, in coils not further worked. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel for Shipbuilding Hulls
Hot-rolled coil, 8 mm thick and 1600 mm wide, made of non-alloy steel with a yield strength of at least 355 MPa, uncoated and in coils. It is not further worked beyond hot-rolling. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel for Wind Turbine Towers
Hot-rolled coil, 7.5 mm thick and 1800 mm wide, made of non-alloy steel with a yield strength of 360 MPa, not further worked, in coils. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Carbon Steel Coil 7mm for Shipbuilding
Hot-rolled carbon steel coil, 7 mm thick and 1600 mm wide, made of medium-carbon non-alloy steel. It is supplied in coils without any plating or coating, intended as feedstock for ship hull plating. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Nonalloy Steel Coil 6mm Thick
Hot-rolled non-alloy steel coil, 6 mm thick and 800 mm wide, supplied in coils for general structural fabrication. It is not clad, plated, or coated, and has not been further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 because it meets the criteria of a flat-rolled product of iron or non-alloy steel, width exceeding 600 mm, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Steel Coil 8mm Thick ASTM A36
Hot-rolled steel coil, 8 mm thick and 1200 mm wide, made of ASTM A36 grade non-alloy steel. It is not further worked beyond hot-rolling and is supplied in coil form for construction-grade structural steel use. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00HRPO Steel Coil 5.5mm for Pipe Manufacturing
Hot-rolled pickled and oiled (HRPO) non-alloy steel coil, 5.5 mm thick and 1500 mm wide, in coils without cladding or coating beyond oil. The pickling and oiling process does not constitute 'further worked' for tariff classification purposes. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Industrial Press Frame High-Strength Steel Coil
Industrial press frame high-strength steel coil, 4.8 mm thick and 850 mm wide, hot-rolled flat-rolled product of non-alloy steel with a 360 MPa yield strength. Not further worked than hot-rolling, uncoated, and presented in coils, it meets the tariff item's thickness range of 4.75 mm to 10 mm.
7208.37.00Mining Equipment Base High-Strength Steel Coil
Mining equipment base high-strength steel coil, 7.2 mm thick and 1,100 mm wide, hot-rolled non-alloy steel with a 365 MPa yield strength. Presented in coils with no further processing, it fits the tariff item's scope for flat-rolled products of iron or non-alloy steel.
7208.37.00Offshore Platform Leg High-Strength Steel Coil
Offshore platform leg high-strength steel coil, 9 mm thick and 1,400 mm wide, hot-rolled non-alloy steel with a 370 MPa yield strength. Uncoated and in coils, it falls under the tariff item for flat-rolled products of iron or non-alloy steel, hot-rolled, not further worked.
7208.37.00Pickled Hot-Rolled Steel Coil 4.75mm Minimum
Pickled hot-rolled non-alloy steel coil, precisely 4.75 mm thick and 700 mm wide, in coils for appliance manufacturing. The pickling process is a permitted chemical treatment and does not count as 'further worked' for tariff purposes. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00S275JR Hot-Rolled Carbon Steel Coil 8mm
S275JR hot-rolled carbon steel coil, 8 mm thickness and width over 600 mm, made from EN 10025 S275JR grade non-alloy steel. Not clad or coated, it fits the tariff item for hot-rolled flat products of iron or non-alloy steel in coils, 4.75–10 mm thick.
7208.37.00SAE 1018 Hot-Rolled Steel Coil 5mm Thick
SAE 1018 hot-rolled steel coil, 5 mm thick and wider than 600 mm, made from low-carbon non-alloy steel. Free of cladding or coatings, it falls under the tariff item for other hot-rolled non-alloy steel coils in the 4.75–10 mm thickness range.
7208.37.00Structural Hot-Rolled Steel Coil 10mm Max
Grade 50 structural non-alloy steel hot-rolled coil, 10 mm thick maximum and 1400 mm wide, uncoated coils for beam production. It is not further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Universal Mill Hot-Rolled Steel Coil 9mm
Universal mill produced hot-rolled non-alloy steel coil, 9 mm thick and 900 mm wide, in coils not further worked. The universal mill process does not affect the tariff classification. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.38.00355 Yield High-Strength Machinery Steel Coil
355 MPa yield hot-rolled steel coil for industrial machinery, 3.3 mm gauge, 1,100 mm width, non-alloy high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Base material for frames and structural components.
7208.38.00460 MPa High-Strength Steel Coil
Ultra-high-strength 460 MPa yield hot-rolled steel coil, 3.2 mm thick, 1,650 mm wide, non-alloy steel. It is hot-rolled, in coils, not further worked, and matches the tariff item's thickness range. Used in advanced engineering applications.
7208.38.00AH36 High-Strength Shipbuilding Steel Coil
ABS AH36 grade hot-rolled steel coil for shipbuilding, 3.4 mm thickness, 1,700 mm width, minimum yield 355 MPa. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Meets marine structural standards.
7208.38.00ASTM A1011 Hot-Rolled Steel Coil 4mm Untrimmed
ASTM A1011 commercial quality hot-rolled steel coil, 4 mm thick and over 600 mm wide, with untrimmed mill edges. This non-alloy steel product is hot-rolled, in coils, and not further worked, meeting the criteria for this tariff item.
7208.38.00ASTM A572 Grade 50 Steel Coil
ASTM A572 Gr.50 hot-rolled steel coil, 4.2 mm thick, 1,000 mm wide, with 345-450 MPa yield, qualifying as high-strength steel. It is not further worked than hot-rolled, in coils, and fits the tariff item's thickness range. Applied in structural steel fabrication.
7208.38.00Automotive Grade HR Coil 3.6mm Thick
Automotive-grade hot-rolled non-alloy steel coil, 3.6 mm thick and 1700 mm wide, supplied in coils without cladding, plating, or coating, and not further worked beyond hot rolling. It falls under tariff item 7208.38.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, in coils, with a thickness of 3 mm or more but less than 4.75 mm.