HRPO Steel Coil 5.5mm for Pipe Manufacturing
Hot-rolled pickled and oiled (HRPO) non-alloy steel coil, 5.5 mm thick and 1500 mm wide, in coils without cladding or coating beyond oil. The pickling and oiling process does not constitute 'further worked' for tariff classification purposes. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is less than 3 mm
This alternative covers hot-rolled coils of non-alloy steel with a thickness of less than 3 mm.
If the thickness is less than 4.75 mm but not less than 3 mm
This alternative covers hot-rolled coils of non-alloy steel with a thickness of 3 mm or more but less than 4.75 mm.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the oil coating is only for protection and does not constitute plating or coating
• Confirm the steel is non-alloy and not further worked beyond pickling and oiling
• Have documentation ready to prove the coil width and thickness
Related Products under Tariff item 7208.37.00
ASTM A36 Hot-Rolled Steel Coil 6mm Thick
ASTM A36 hot-rolled steel coil, 6 mm thick and 1,500 mm wide, made from non-alloy A36 grade steel. Supplied in coil form without cladding, plating, or coating, it meets the tariff item's requirements for flat-rolled non-alloy steel products.
ASTM A570 Grade 33 Steel Coil 4.8mm Thick
ASTM A570 Grade 33 steel coil, 4.8 mm thick, hot-rolled non-alloy steel with an untreated surface. The coil width exceeds 600 mm, and the product is not further worked, fitting the tariff item for other hot-rolled non-alloy steel flat products.
Automotive Chassis High-Strength Steel Coil
Hot-rolled non-alloy steel coil, 5.2 mm thick and 900 mm wide, high-strength with a yield point of at least 355 MPa, not clad, plated, or coated, in coils. It is not further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
Commercial Quality Hot-Rolled Steel Coil 9.5mm
Commercial quality hot-rolled steel coil, 9.5 mm thick and 1,600 mm wide, made from non-alloy steel. Not plated or further worked, it falls under the tariff item for other hot-rolled coils of iron or non-alloy steel in the 4.75–10 mm thickness range.
Construction Crane Boom High-Strength Steel Coil
Hot-rolled steel coil, 6.8 mm thick and 1000 mm wide, made of non-alloy high-strength steel with a yield strength of 380 MPa, in coils with no further working. It is not clad, plated, or coated. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
Drawing Quality Hot-Rolled Steel Coil 6.5mm
Drawing quality hot-rolled steel coil, 6.5 mm gauge and 1,200 mm width, made from non-alloy steel. No coatings or cladding, and not further worked, it fits the tariff item for other hot-rolled coils of iron or non-alloy steel in the specified thickness range.