Of a width exceeding 1,830 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. > Other, in coils, not further worked than hot-rolled: > Of a thickness of 4.75 mm or more but not exceeding 10 mm > Of a width exceeding 1,830 mm
Duty Rate (from China)
Products classified under Tariff item 7208.37.00.50
ASTM A36 Hot-Rolled Steel Coil 6mm Thick
ASTM A36 hot-rolled steel coil, 6 mm thick and 1,500 mm wide, made from non-alloy A36 grade steel. Supplied in coil form without cladding, plating, or coating, it meets the tariff item's requirements for flat-rolled non-alloy steel products.
7208.37.00ASTM A570 Grade 33 Steel Coil 4.8mm Thick
ASTM A570 Grade 33 steel coil, 4.8 mm thick, hot-rolled non-alloy steel with an untreated surface. The coil width exceeds 600 mm, and the product is not further worked, fitting the tariff item for other hot-rolled non-alloy steel flat products.
7208.37.00Automotive Chassis High-Strength Steel Coil
Hot-rolled non-alloy steel coil, 5.2 mm thick and 900 mm wide, high-strength with a yield point of at least 355 MPa, not clad, plated, or coated, in coils. It is not further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Commercial Quality Hot-Rolled Steel Coil 9.5mm
Commercial quality hot-rolled steel coil, 9.5 mm thick and 1,600 mm wide, made from non-alloy steel. Not plated or further worked, it falls under the tariff item for other hot-rolled coils of iron or non-alloy steel in the 4.75–10 mm thickness range.
7208.37.00Construction Crane Boom High-Strength Steel Coil
Hot-rolled steel coil, 6.8 mm thick and 1000 mm wide, made of non-alloy high-strength steel with a yield strength of 380 MPa, in coils with no further working. It is not clad, plated, or coated. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Drawing Quality Hot-Rolled Steel Coil 6.5mm
Drawing quality hot-rolled steel coil, 6.5 mm gauge and 1,200 mm width, made from non-alloy steel. No coatings or cladding, and not further worked, it fits the tariff item for other hot-rolled coils of iron or non-alloy steel in the specified thickness range.
7208.37.00Grade 50 Hot-Rolled Structural Steel Coil 7mm
Grade 50 hot-rolled structural steel coil, 7 mm thick and 1,800 mm wide, made from ASTM A709 Grade 50 non-alloy steel. Uncoated and unclad, it meets the tariff item's criteria for flat-rolled iron or non-alloy steel, hot-rolled, in coils, 4.75–10 mm thick.
7208.37.00Heavy Duty Trailer Frame High-Strength Steel
Hot-rolled steel coil, 5.5 mm thick and 750 mm wide, made of non-alloy high-strength steel with a minimum yield of 355 MPa, not further worked. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Heavy Hot-Rolled Mild Steel Coil 4.8mm
Heavy hot-rolled mild steel coil, 4.8 mm thick and 1000 mm wide, made of low-carbon non-alloy steel. It is uncoated and supplied in coils, suitable for automotive frame components. This product falls under tariff item 7208.37.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, hot-rolled, not clad, plated or coated, and in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Hot-Rolled Steel Coil for Heavy Machinery Frames
Hot-rolled steel coil of non-alloy steel, 6 mm thick and 1200 mm wide, meeting high-strength steel criteria with a minimum yield point of 355 MPa for thicknesses of 3 mm or more. It is not further worked and is supplied in coils. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel Coil for Bridge Girder Fabrication
Flat-rolled hot-rolled steel coil, 8.5 mm thick and 1500 mm wide, made of non-alloy steel with a yield strength exceeding 355 MPa, in coils not further worked. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel for Shipbuilding Hulls
Hot-rolled coil, 8 mm thick and 1600 mm wide, made of non-alloy steel with a yield strength of at least 355 MPa, uncoated and in coils. It is not further worked beyond hot-rolling. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00High-Strength Steel for Wind Turbine Towers
Hot-rolled coil, 7.5 mm thick and 1800 mm wide, made of non-alloy steel with a yield strength of 360 MPa, not further worked, in coils. It is not clad, plated, or coated. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Carbon Steel Coil 7mm for Shipbuilding
Hot-rolled carbon steel coil, 7 mm thick and 1600 mm wide, made of medium-carbon non-alloy steel. It is supplied in coils without any plating or coating, intended as feedstock for ship hull plating. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Nonalloy Steel Coil 6mm Thick
Hot-rolled non-alloy steel coil, 6 mm thick and 800 mm wide, supplied in coils for general structural fabrication. It is not clad, plated, or coated, and has not been further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 because it meets the criteria of a flat-rolled product of iron or non-alloy steel, width exceeding 600 mm, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Hot-Rolled Steel Coil 8mm Thick ASTM A36
Hot-rolled steel coil, 8 mm thick and 1200 mm wide, made of ASTM A36 grade non-alloy steel. It is not further worked beyond hot-rolling and is supplied in coil form for construction-grade structural steel use. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00HRPO Steel Coil 5.5mm for Pipe Manufacturing
Hot-rolled pickled and oiled (HRPO) non-alloy steel coil, 5.5 mm thick and 1500 mm wide, in coils without cladding or coating beyond oil. The pickling and oiling process does not constitute 'further worked' for tariff classification purposes. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Industrial Press Frame High-Strength Steel Coil
Industrial press frame high-strength steel coil, 4.8 mm thick and 850 mm wide, hot-rolled flat-rolled product of non-alloy steel with a 360 MPa yield strength. Not further worked than hot-rolling, uncoated, and presented in coils, it meets the tariff item's thickness range of 4.75 mm to 10 mm.
7208.37.00Mining Equipment Base High-Strength Steel Coil
Mining equipment base high-strength steel coil, 7.2 mm thick and 1,100 mm wide, hot-rolled non-alloy steel with a 365 MPa yield strength. Presented in coils with no further processing, it fits the tariff item's scope for flat-rolled products of iron or non-alloy steel.
7208.37.00Offshore Platform Leg High-Strength Steel Coil
Offshore platform leg high-strength steel coil, 9 mm thick and 1,400 mm wide, hot-rolled non-alloy steel with a 370 MPa yield strength. Uncoated and in coils, it falls under the tariff item for flat-rolled products of iron or non-alloy steel, hot-rolled, not further worked.
7208.37.00Pickled Hot-Rolled Steel Coil 4.75mm Minimum
Pickled hot-rolled non-alloy steel coil, precisely 4.75 mm thick and 700 mm wide, in coils for appliance manufacturing. The pickling process is a permitted chemical treatment and does not count as 'further worked' for tariff purposes. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00S275JR Hot-Rolled Carbon Steel Coil 8mm
S275JR hot-rolled carbon steel coil, 8 mm thickness and width over 600 mm, made from EN 10025 S275JR grade non-alloy steel. Not clad or coated, it fits the tariff item for hot-rolled flat products of iron or non-alloy steel in coils, 4.75–10 mm thick.
7208.37.00SAE 1018 Hot-Rolled Steel Coil 5mm Thick
SAE 1018 hot-rolled steel coil, 5 mm thick and wider than 600 mm, made from low-carbon non-alloy steel. Free of cladding or coatings, it falls under the tariff item for other hot-rolled non-alloy steel coils in the 4.75–10 mm thickness range.
7208.37.00Structural Hot-Rolled Steel Coil 10mm Max
Grade 50 structural non-alloy steel hot-rolled coil, 10 mm thick maximum and 1400 mm wide, uncoated coils for beam production. It is not further worked beyond hot-rolling. This product falls under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
7208.37.00Universal Mill Hot-Rolled Steel Coil 9mm
Universal mill produced hot-rolled non-alloy steel coil, 9 mm thick and 900 mm wide, in coils not further worked. The universal mill process does not affect the tariff classification. This product is classified under tariff item 7208.37.00 as it is a flat-rolled product of non-alloy steel, over 600 mm wide, hot-rolled, not clad, plated or coated, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.