Other
Semi-finished products of iron or non-alloy steel. > Containing by weight less than 0.25% of carbon: > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7207.19
100mm Round Low Carbon Steel Bloom
A circular semifinished steel bloom with a 100mm diameter, made from non-alloy steel containing less than 0.25% carbon by weight. It is typically hot-rolled and used as feedstock for manufacturing structural shapes or plates. This product falls under tariff item 7207.19.00 as a semi-finished product of iron or non-alloy steel with low carbon content.
7207.19.00125mm Diameter Steel Round Billet
A large 125mm circular billet of low-carbon non-alloy steel with less than 0.25% carbon, intended for heavy section rolling mills. Its semi-finished status is confirmed by the lack of further working beyond primary hot-rolling or continuous casting. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.001.5 Inch Diameter Low Carbon Steel Billet
A semi-finished product of non-alloy steel with less than 0.25% carbon content, featuring a circular cross-section measuring 1.5 inches in diameter. It is used primarily as feedstock for forging, rolling, or extrusion into finished steel products. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon non-alloy steel.
7207.19.002 Inch Low Carbon Circular Billet
A standard 2-inch diameter circular billet of non-alloy steel with carbon content below 0.25%, ideal for continuous casting into merchant bars. It is a semi-finished product not further worked beyond casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.003 Inch Round Low Carbon Billet
A 3-inch (76mm) diameter round billet of non-alloy low carbon steel with less than 0.25% carbon, featuring a circular cross-section for seamless pipe production. It is a semi-finished product not further worked than continuous casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.004 Inch Circular Low Carbon Steel Ingot
A semi-finished low carbon steel ingot with under 0.25% carbon and a precise 4-inch circular cross-section, suitable for remelting or direct hot working. It is commonly used in steel mills for producing wire rods or seamless tubes. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon non-alloy steel.
7207.19.0050mm Round Low Carbon Steel Semifinished
A 50mm circular cross-section semi-finished low carbon non-alloy steel product with less than 0.25% carbon, used for forging automotive parts. It is not further worked than continuous casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.0075mm Diameter Nonalloy Steel Round
A 75mm diameter round semi-finished product from low-carbon non-alloy steel with less than 0.25% carbon, used in extrusion processes for bars and profiles. It meets the exact criteria for semi-finished products with a circular cross-section. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Basic Oxygen Furnace Billet Low Carbon
A 110x110mm billet produced by the basic oxygen furnace process from non-alloy steel containing less than 0.25% carbon by weight. It is a semi-finished product, not further worked than cast or hot-rolled, and is intended for general engineering applications such as rolling into bars or shapes.
7207.19.00Continuous Cast Low C Billet 130mm
A 130mm continuous cast billet of non-alloy steel with less than 0.20% carbon, used for fencing wire production. It is a semi-finished product not further worked beyond continuous casting. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Continuous Cast Steel Billet 120mm
A 120mm round or square billet produced by continuous casting from non-alloy steel with less than 0.25% carbon. It is a semi-finished product used as feedstock for wire rod or bar production, and has not been further worked beyond the casting process.
7207.19.00Low Carbon 80mm Circular Bloom
An 80mm diameter circular bloom from non-alloy steel with less than 0.25% carbon, used as plate mill feedstock. No surface treatments are applied, maintaining its semi-finished classification. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Low Carbon Cast Bloom 180x180mm
A 180x180mm cast bloom of low carbon non-alloy steel, used for railroad rail production. Its semi-finished state qualifies it as a product not further worked than continuous casting. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Low Carbon Slab for Automotive Sheet
A 220mm thick slab of non-alloy steel with less than 0.25% carbon, specially formulated for rolling into automotive body sheet. It is a semi-finished flat-rolled product, cast and not further worked, and is classified as 'other' semi-finished low-carbon steel.
7207.19.00Low Carbon Steel Billet 100x100mm
A square semi-finished steel billet measuring 100mm x 100mm, made from non-alloy steel with less than 0.25% carbon content. It is used for hot rolling into bars or shapes and has not been further worked beyond casting.
7207.19.00Low-Carbon Steel Billet 100x100mm
A square semi-finished steel billet made from non-alloy steel with less than 0.25% carbon content, measuring 100mm x 100mm in cross-section and typically 6-12 meters in length. It is used primarily for rolling into bars, rods, or sections. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Low Carbon Steel Ingot 500kg
A 500kg rectangular ingot of non-alloy low-carbon steel with less than 0.25% carbon, in primary form before secondary processing into billets or slabs. It is a semi-finished product under the 'other' category of low-carbon iron or non-alloy steel.
7207.19.00Low Carbon Steel Rundown 80x80mm
A rundown (semi-round) semi-finished product with an 80x80mm cross-section from non-alloy steel with less than 0.25% carbon, used for special profile rolling. It is in basic cast form without further working. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Low Carbon Steel Semifinished 95mm
A 95mm roundish semi-finished low carbon non-alloy steel product for bar mills, with less than 0.25% carbon. It is not further worked than continuous casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Low Carbon Steel Semifinished for Pipe
A 250mm thick slab of non-alloy steel with less than 0.25% carbon, specially formed for use as seamless pipe billet. It is a semi-finished product, cast and not further worked, and is used in oil and gas pipe manufacturing.
7207.19.00Low Carbon Steel Slab for Pipe 220mm
A 220mm thick slab optimized for seamless pipe production, made from non-alloy steel with less than 0.25% carbon. It is in semi-finished cast form without further working. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
7207.19.00Nonalloy Steel Billet 110x110mm
A 110x110mm square billet of non-alloy steel containing less than 0.25% carbon by weight, supplied in 11-metre lengths. It is a semi-finished product, continuous cast and not further worked, intended for rolling into rebar or merchant bars. This tariff item covers semi-finished iron or non-alloy steel products with low carbon content.
7207.19.00Nonalloy Steel Bloom 150x150mm
A rectangular semi-finished bloom of low-carbon non-alloy steel with less than 0.25% carbon, measuring 150mm x 150mm in cross-section. Produced via continuous casting for rolling into plates or structural sections, it has not been further worked.
7207.19.00Nonalloy Steel Bloom for Heavy Plate
A 200x200mm bloom of low-carbon non-alloy steel with less than 0.25% carbon, used for rolling into heavy plates. It is a semi-finished product, cast and not further worked, and is suitable for shipbuilding and pressure vessel applications.
7207.19.00Nonalloy Steel Bloom for Plate 160mm
A 160mm square bloom of non-alloy steel with less than 0.25% carbon, intended for rolling into plates. It is a semi-finished product, cast and not further worked beyond primary shaping. This tariff item applies to semi-finished products of iron or non-alloy steel with low carbon content.
7207.19.00Nonalloy Steel Semifinished Block 250x250mm
A large 250x250mm block of low-carbon non-alloy steel, cast and cut to size but not rolled, used for structural steel production. It is a semi-finished product under the 'other' category of low-carbon iron or non-alloy steel.
7207.19.00Nonalloy Steel Semifinished Round 150mm
A 150mm diameter round semi-finished product of non-alloy steel with less than 0.25% carbon, used as seamless tube stock. It is a semi-finished product, cast and not further worked, and is a precursor for pipe and tube manufacturing.
7207.19.00Nonalloy Steel Semifinished Slab 250mm
A 250mm thick semi-finished slab of non-alloy low-carbon steel (less than 0.25% carbon), 1500mm wide, for heavy plate mills. It is cast and scarfed but not rolled, so it remains a semi-finished product. This tariff item covers semi-finished iron or non-alloy steel products with low carbon content.
7207.19.00Prime Low Carbon Steel Slab 1800mm Wide
A wide 1800mm steel slab, 200mm thick, made from non-alloy steel with less than 0.25% carbon, for hot-rolled coil production in pipe manufacturing. It is a semi-finished flat-rolled product, cast and not further worked, of prime quality.
7207.19.00Remelt Ingot Low Carbon Steel
An electroslag remelted ingot of non-alloy steel with less than 0.25% carbon, for high-purity applications such as aerospace forging stock. It is a semi-finished product under the 'other' category of low-carbon iron or non-alloy steel.
7207.19.00Semifinished Steel Dog Bone 140mm
A 'dog bone' shaped semi-finished section of low-carbon non-alloy steel, 140mm thick with tapering ends and a web, for beam rolling. It is a semi-finished product, cast and not further worked. This tariff item covers semi-finished products of iron or non-alloy steel with less than 0.25% carbon.
7207.19.00Square Low Carbon Billet for Rebar
A 130x130mm square billet of non-alloy steel with less than 0.25% carbon, destined for concrete reinforcing bar production. It is a semi-finished product, cast and not further worked, and is a standard grade for construction rebar.
7207.19.00Steel Billet 140x140mm Construction Grade
A 140x140mm square billet of non-alloy steel with less than 0.25% carbon, used for structural beams. It is a semi-finished product, cast and not further worked, and is a construction industry standard.
7207.19.00Steel Billet for Wire Rod 90mm Square
A 90mm square billet of non-alloy steel with a maximum 0.20% carbon, specifically for wire rod production. It is continuous cast and not further worked, making it a semi-finished product. This tariff item applies to semi-finished iron or non-alloy steel products with low carbon content.
7207.19.00Steel Semibloom 200x100mm
A rectangular semibloom of low-carbon non-alloy steel, 200mm x 100mm in cross-section, for medium sections. It is a semi-finished product, cast and not further worked. This tariff item covers semi-finished products of iron or non-alloy steel with less than 0.25% carbon.
7207.19.00Steel Slab 200mm Thick Low Carbon
A flat semi-finished steel slab of non-alloy iron with less than 0.25% carbon, approximately 200mm thick and 1-2m wide, cast for hot-rolling into sheets or plates. It is a semi-finished product under the 'other' category of low-carbon semi-finished steel.