Basic Oxygen Furnace Billet Low Carbon
A 110x110mm billet produced by a basic oxygen furnace, made of non-alloy steel with a carbon content below 0.25%. It is a semi-finished product intended for further hot working into bars, rods, or other shapes, and is not yet an article of another heading.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the billet contains 0.25% or more carbon by weight
This sibling item covers semi-finished products of iron or non-alloy steel containing 0.25% or more carbon.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the billet's carbon content is below 0.25% by weight and that it is not further worked than cast or hot-rolled
• Provide a mill test certificate to the CBSA to confirm the chemical composition
• Verify the product is not classified as waste or scrap under section note 8
Related Products under Tariff item 7207.19.00
Continuous Cast Steel Billet 120mm
A 120mm round or square billet produced by continuous casting, made of non-alloy steel with less than 0.25% carbon. It is a semi-finished product used as feedstock for wire rod or bar production, and has not been further worked beyond casting.
Low Carbon Slab for Automotive Sheet
A 220mm thick slab of non-alloy steel with a carbon content below 0.25%, produced for rolling into automotive body sheets. It is a semi-finished product, cast and not further worked, and is classified under this item as 'other' low-carbon semi-finished steel.
Low Carbon Steel Billet 100x100mm
A square semi-finished billet of non-alloy steel with less than 0.25% carbon, measuring 100mm x 100mm in cross-section. It is used for hot rolling into bars or shapes and has not been further worked beyond casting or primary hot-rolling.
Low Carbon Steel Ingot 500kg
A 500kg rectangular ingot of non-alloy low-carbon steel, containing less than 0.25% carbon. It is a primary form used before secondary processing into billets or slabs, and is classified as a semi-finished product under this item.
Low Carbon Steel Semifinished for Pipe
A 250mm thick slab of non-alloy steel with less than 0.25% carbon, produced as a semi-finished product for seamless pipe manufacturing. It is cast and not further worked, and falls under this item as 'other' low-carbon semi-finished steel.
Nonalloy Steel Bloom 150x150mm
A rectangular semi-finished bloom of low-carbon non-alloy steel, measuring 150mm x 150mm, produced by continuous casting. It is used for rolling into plates or structural sections and has not been further worked, qualifying for this item.