Steel Semibloom 200x100mm
A rectangular semibloom of low-carbon non-alloy steel, 200mm x 100mm in cross-section, for medium sections. It is a semi-finished product, cast and not further worked. This tariff item covers semi-finished products of iron or non-alloy steel with less than 0.25% carbon.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the semibloom contains 0.25% or more carbon by weight
Higher carbon content changes the subheading.
If the semibloom has been further worked into angles, shapes, or sections
Finished structural shapes are classified under heading 7216.
If the semibloom is of alloy steel
Alloy steel bars and rods are classified under heading 7228.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the semibloom's carbon content is below 0.25% by weight and keep records of its dimensions
• Since it is not further worked, classify it as a semi-finished product under this item
• Check if the product is subject to Canadian anti-dumping or safeguard measures on steel
Related Products under Tariff item 7207.19.00
100mm Round Low Carbon Steel Bloom
A circular semifinished steel bloom with a 100mm diameter, made from non-alloy steel containing less than 0.25% carbon by weight. It is typically hot-rolled and used as feedstock for manufacturing structural shapes or plates. This product falls under tariff item 7207.19.00 as a semi-finished product of iron or non-alloy steel with low carbon content.
125mm Diameter Steel Round Billet
A large 125mm circular billet of low-carbon non-alloy steel with less than 0.25% carbon, intended for heavy section rolling mills. Its semi-finished status is confirmed by the lack of further working beyond primary hot-rolling or continuous casting. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
1.5 Inch Diameter Low Carbon Steel Billet
A semi-finished product of non-alloy steel with less than 0.25% carbon content, featuring a circular cross-section measuring 1.5 inches in diameter. It is used primarily as feedstock for forging, rolling, or extrusion into finished steel products. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon non-alloy steel.
2 Inch Low Carbon Circular Billet
A standard 2-inch diameter circular billet of non-alloy steel with carbon content below 0.25%, ideal for continuous casting into merchant bars. It is a semi-finished product not further worked beyond casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
3 Inch Round Low Carbon Billet
A 3-inch (76mm) diameter round billet of non-alloy low carbon steel with less than 0.25% carbon, featuring a circular cross-section for seamless pipe production. It is a semi-finished product not further worked than continuous casting or primary hot-rolling. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon steel.
4 Inch Circular Low Carbon Steel Ingot
A semi-finished low carbon steel ingot with under 0.25% carbon and a precise 4-inch circular cross-section, suitable for remelting or direct hot working. It is commonly used in steel mills for producing wire rods or seamless tubes. This product is classified under tariff item 7207.19.00 as other semi-finished products of low-carbon non-alloy steel.