Stainless Steel Kitchen Equipment Scrap
Dismantled scrap from commercial stainless steel sinks, counters, and shelving from restaurant refits, with typical 18/8 or 18/10 compositions. This is stainless alloy scrap for remelting, processed to remove fittings and non-steel parts.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags
No agency flag on this HTS number in the CBSA Single Window matching criteria.
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the scrap is from other alloy steel
Other alloy steel scrap is classified under this item.
If the scrap is mixed with non-stainless steel
Mixed scrap may be classified as other waste and scrap.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure all non-stainless fittings, such as brass faucets or plastic components, are removed before shipping
• Provide a description of the equipment sources and typical grades
• Be prepared for CBSA inspection to verify the scrap is stainless steel
Related Products under Tariff item 7204.21.00
17-4 PH Stainless Steel Turnings
Machining turnings of 17-4 PH precipitation-hardening stainless steel, containing 15-17.5% chromium and copper, generated from aerospace and medical device production. These turnings are waste and scrap of stainless steel, not usable as original parts, and are destined for remelting.
304 Stainless Steel Pipe End Cuttings
End cuttings from 304 austenitic stainless steel pipes, produced during cutting to length in plumbing and food processing equipment fabrication. These are clean, consistent stainless steel scrap for remelting, with typical 18% chromium and 8% nickel composition.
316L Stainless Steel Borings
Fine borings and particles from drilling 316L marine-grade stainless steel, containing molybdenum and chromium for corrosion resistance. These are waste and scrap of stainless steel, unsuitable for further use as parts, and intended for remelting.
409 Stainless Steel Automotive Muffler Scrap
Shredded exhaust mufflers and pipes from end-of-life vehicles made of 409 ferritic stainless steel, with 10.5-11.75% chromium. This is high-volume stainless steel scrap for remelting, recovered from automotive recycling.
430 Stainless Steel Clippings
Sheared edge trimmings and clippings from 430 ferritic stainless steel sheet production, with 16-18% chromium and low nickel. These are clean stainless steel scrap for remelting, typical from appliance manufacturing.
AISI 304 Stainless Steel Turnings
Metal shavings and turnings from machining AISI 304 stainless steel components, with 18% chromium and 8% nickel. These are waste and scrap of stainless steel, suitable for remelting, and generated in manufacturing processes.