AISI 304 Stainless Steel Turnings
AISI 304 stainless steel turnings are metal shavings from machining components, with an austenitic composition of 18% chromium and 8% nickel. These are waste and scrap, not usable as parts, and are intended for remelting, qualifying under tariff item 7204.21.00 for stainless steel waste and scrap.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the turnings are of other alloy steel
Other alloy steel scrap is classified separately.
If the turnings are specifically turnings, shavings, or chips
The form of waste and scrap determines the tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure turnings are free from oils or coolants, which may require special disposal
• Provide a certificate of analysis confirming the 304 grade
• Consider using a magnet to remove any ferrous contaminants before shipping
Related Products under Tariff item 7204.21.00
17-4 PH Stainless Steel Turnings
17-4 PH stainless steel machining turnings, a precipitation-hardening alloy with 15-17.5% chromium and copper, are waste and scrap from aerospace and medical device production. They are not usable as such and are intended for remelting, meeting the definition of stainless steel scrap under tariff item 7204.21.00.
304 Stainless Steel Pipe End Cuttings
End cuttings from 304 stainless steel pipes are clean, consistent austenitic stainless steel scrap generated during fabrication. These pieces are waste and scrap, not usable as pipes, and are intended for remelting, qualifying under tariff item 7204.21.00 for stainless steel waste and scrap.
316L Stainless Steel Borings
316L stainless steel borings are fine particles from drilling operations, containing molybdenum and chromium, making them stainless steel scrap for remelting. They are waste and scrap, not usable as parts, and fall under tariff item 7204.21.00 for stainless steel waste and scrap.
409 Stainless Steel Automotive Muffler Scrap
Shredded exhaust mufflers and pipes from end-of-life vehicles are 409 ferritic stainless steel scrap with 10.5-11.75% chromium. These are waste and scrap, not usable as original parts, and are intended for remelting, qualifying under tariff item 7204.21.00 for stainless steel waste and scrap.
430 Stainless Steel Clippings
Sheared edge trimmings from 430 ferritic stainless steel sheet production are waste and scrap with 16-18% chromium and low nickel. These clippings are not usable as sheets and are intended for remelting, meeting the definition of stainless steel scrap under tariff item 7204.21.00.
AISI 321 Stainless Steel Scrap
AISI 321 stainless steel scrap, stabilized with titanium, comes from welded exhaust components and aircraft parts. It is waste and scrap with elevated chromium and nickel, not usable as original parts, and is intended for remelting, falling under tariff item 7204.21.00 for stainless steel waste and scrap.