Of stainless steel
Ferrous waste and scrap; remelting scrap ingots of iron or steel. > Waste and scrap of alloy steel: > Of stainless steel > Of stainless steel
Duty Rate (from China)
Products classified under Tariff item 7204.21.00.00
17-4 PH Stainless Steel Turnings
Machining turnings of 17-4 PH precipitation-hardening stainless steel, containing 15-17.5% chromium and copper, generated from aerospace and medical device production. These turnings are waste and scrap of stainless steel, not usable as original parts, and are destined for remelting.
7204.21.00304 Stainless Steel Pipe End Cuttings
End cuttings from 304 austenitic stainless steel pipes, produced during cutting to length in plumbing and food processing equipment fabrication. These are clean, consistent stainless steel scrap for remelting, with typical 18% chromium and 8% nickel composition.
7204.21.00316L Stainless Steel Borings
Fine borings and particles from drilling 316L marine-grade stainless steel, containing molybdenum and chromium for corrosion resistance. These are waste and scrap of stainless steel, unsuitable for further use as parts, and intended for remelting.
7204.21.00409 Stainless Steel Automotive Muffler Scrap
Shredded exhaust mufflers and pipes from end-of-life vehicles made of 409 ferritic stainless steel, with 10.5-11.75% chromium. This is high-volume stainless steel scrap for remelting, recovered from automotive recycling.
7204.21.00430 Stainless Steel Clippings
Sheared edge trimmings and clippings from 430 ferritic stainless steel sheet production, with 16-18% chromium and low nickel. These are clean stainless steel scrap for remelting, typical from appliance manufacturing.
7204.21.00AISI 304 Stainless Steel Turnings
Metal shavings and turnings from machining AISI 304 stainless steel components, with 18% chromium and 8% nickel. These are waste and scrap of stainless steel, suitable for remelting, and generated in manufacturing processes.
7204.21.00AISI 321 Stainless Steel Scrap
Titanium-stabilized AISI 321 stainless steel scrap from welded exhaust components and aircraft parts, with elevated chromium and nickel. This is stainless alloy remelting scrap, recovered from high-temperature applications.
7204.21.00Duplex 2205 Stainless Steel Scrap
Scrap from 2205 duplex stainless steel used in offshore oil platforms and pressure vessels, with 22% chromium, 5% nickel, and 3% molybdenum. This is high-strength stainless alloy scrap for remelting, with a dual-phase microstructure.
7204.21.00Nitronic 60 Stainless Steel Turnings
Machining turnings from Nitronic 60 high-strength stainless steel used for valves and pump components, with 16-18% chromium and 8% manganese. These are wear-resistant stainless steel scrap for remelting, with nitrogen strengthening.
7204.21.00Stainless Steel Kitchen Equipment Scrap
Dismantled scrap from commercial stainless steel sinks, counters, and shelving from restaurant refits, with typical 18/8 or 18/10 compositions. This is stainless alloy scrap for remelting, processed to remove fittings and non-steel parts.