Chapter 7217 — Customs Tariff Headings

7217.20.00Plated or coated with zinc

7217.30.00Plated or coated with other base metals

7217.90.00Other

Calculate exact duty for your shipment Not sure about classification? Ask the Tariff Assistant

Products classified under Tariff item 72.17

0.35 mm Filter Screen Flat Wire

Fine low-carbon non-alloy flat wire with a thickness of 0.35 mm, used for industrial filter screens, with no coatings. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is still within the scope of this tariff item.

0.4 mm Battery Tab Flat Steel Wire

Flat low-carbon non-alloy wire with dimensions of 0.4 mm by 4 mm, uncoated, used for lithium battery tabs. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.

0.4mm Medical Device Wire

This is a precision 0.4mm diameter wire made of low carbon, non-alloy steel, with a bare, unplated surface. It is used in medical devices such as guidewires, stents, and surgical instruments, where exact tolerances are required for subsequent biocompatible processing. The product falls under tariff item 7217.10.00 because it is wire of iron or non-alloy steel that is not plated or coated, whether or not polished.

0.5mm Annealed Low Carbon Wire

This is a 0.5mm diameter, soft annealed round wire made of low carbon, non-alloy steel with less than 0.25% carbon. It is not plated or coated, and the annealing process softens the wire for better formability in applications like electronics harnesses and jewelry making. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

0.5 mm Thick Spring Flat Wire

Uncoated flat wire of low-carbon non-alloy steel, with a thickness of 0.5 mm and a width of 8 mm, used in flat springs and fasteners. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.

0.6mm Electronics Harness Wire

This is an ultra-fine 0.6mm diameter round wire made of low carbon, non-alloy steel, with a bare, non-plated surface. It is used for wiring harnesses in consumer electronics and automotive sensors, where subsequent insulation is applied. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

0.75 mm Electrical Connector Flat Wire

Low-carbon non-alloy steel flat wire, with a thickness of 0.75 mm and a width of 5 mm, polished but not coated, used for electrical terminal strips. This product falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

0.8mm Low Carbon Steel Round Wire

This is a 0.8mm diameter round wire made of iron or non-alloy steel with less than 0.25% carbon content. It is not plated or coated and is used primarily for manufacturing springs and small wire forms in automotive and appliance industries. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

0.9mm Industrial Binding Wire

This is a 0.9mm diameter round low carbon steel wire, not plated, used for concrete reinforcement tying and packaging bundling. It meets strict specifications of less than 0.25% carbon and is supplied in straight lengths or soft coils. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.0 mm Cable Armouring Flat Wire

Non-alloy steel flat wire with a thickness of 1.0 mm and a width of 3 mm, not coated, used for power cable armouring. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.

1.0mm Spring Temper Steel Wire

This is a 1.0mm diameter, cold drawn spring quality wire made of low carbon, non-alloy steel, not plated or coated. It is designed for small compression springs in toys, pens, and electronics, offering high tensile strength. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.1mm Craft and Jewelry Wire

This is a dead soft 1.1mm diameter round wire made of low carbon, non-alloy steel, not plated. It is highly malleable for hand forming in artisan jewelry, wire wrapping, and craft applications. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.2mm Bright Drawn Steel Wire

This is a 1.2mm diameter bright drawn round wire made of low carbon, non-alloy steel with less than 0.25% carbon. It has a polished bright finish but is not plated, and is commonly used for binding wire, mesh production, and light-duty cables. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.2 mm Furniture Binding Flat Wire

Non-alloy low-carbon flat steel wire, with a thickness of 1.2 mm and a width of 3 mm, not coated, used for upholstery binding. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.

1.3mm Model Making Wire

This is a straightened and cut 1.3mm diameter low carbon round wire for architectural models, robotics, and hobby applications. It is non-plated and processed without phosphate to resist rust. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.4mm Fine Mesh Weaving Wire

This is a high precision 1.4mm diameter round wire made of low carbon, non-alloy steel with less than 0.25% carbon. It is polished but not coated, and is used for insect screening and filtration mesh, with critical tolerances for uniform weaving. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

1.5mm Thick Polished Low Carbon Flat Wire

Polished flat wire of non-alloy steel with less than 0.25% carbon, 1.5 mm thick and 15 mm wide, suitable for springs and clips. It is classified under tariff item 7217.10.00 as not plated or coated wire.

1.6mm x 8mm Low Carbon Profile Flat Wire

Slightly profiled flat wire of non-alloy steel with less than 0.25% carbon, 1.6 mm thick, for specialized fasteners. It is classified under tariff item 7217.10.00 as not plated or coated wire.

1.8mm Thick Nonalloy Steel Flat Shim Wire

Precision flat shim wire of low carbon steel with less than 0.25% carbon, 1.8 mm thick and 12 mm wide, for machinery alignment. It is classified under tariff item 7217.10.00 as not plated or coated wire.

2.2mm Thick Industrial Low Carbon Flat Wire

Heavy-duty flat wire, 2.2 mm thick, made from non-alloy steel with less than 0.25% carbon, not coated, for manufacturing clips. It is classified under tariff item 7217.10.00 as not plated or coated wire.

2.5mm x 20mm Low Carbon Flat Binding Wire

Flat binding wire from low carbon non-alloy steel, 2.5 mm thick, used in construction and packaging strapping. It is classified under tariff item 7217.10.00 as not plated or coated wire.

3mm Thick Low Carbon Flat Annealed Wire

Annealed flat wire from non-alloy low carbon steel, 3 mm thick and 25 mm wide, for flexible binding applications. It is classified under tariff item 7217.10.00 as not plated or coated wire.

AISI 1008 Low Carbon Flat Steel Wire

Flat wire made from non-alloy steel with a carbon content of less than 0.25%, measuring 0.8 mm thick and 10 mm wide, not plated or coated. This product is used in various industrial applications and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Automotive Clip Flat Steel Wire 0.6 mm

Flat wire of iron or non-alloy steel, measuring 0.6 mm in thickness and 12 mm in width, with a carbon content below 0.25%. It is uncoated and used to manufacture plastic clips in vehicles, classified under tariff item 7217.10.00 as not plated or coated wire.

Cold-Rolled Low Carbon Flat Steel Wire 2mm Thick

Flat wire made from non-alloy steel containing less than 0.25% carbon, with a thickness of 2 mm and width of 10 mm, not plated or coated. It is classified under tariff item 7217.10.00 as not plated or coated wire.

Galvanized Staple Flat Wire 1.0 mm

Plain low-carbon flat wire, 1.0 mm thick and 2 mm wide, made of non-alloy steel, uncoated and intended for office staple production before galvanizing. It is classified under tariff item 7217.10.00 as not plated or coated wire.

HVAC Fin Stock Flat Wire 1.1 mm

Low-carbon steel flat wire, 1.1 mm thick, used for HVAC heat exchanger fins, not coated. It is a non-alloy steel product classified under tariff item 7217.10.00 as not plated or coated wire.

Industrial Brush Flat Wire 0.8 mm

Tempered low-carbon flat wire, 0.8 mm thick, for industrial cleaning brushes, uncoated. It is a non-alloy steel product classified under tariff item 7217.10.00 as not plated or coated wire.

Industrial Low-Carbon Flat Annealed Wire

Industrial low-carbon flat annealed wire of non-alloy steel, with a carbon content below 0.25% and a thickness not exceeding 0.25 mm. This product is not plated or coated, and may be polished, making it suitable for flexible industrial tying applications. It falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Low Carbon Flat Steel Wire for Paper Clips

Thin flat wire made from non-alloy steel with a carbon content of less than 0.25%, measuring under 0.25 mm in thickness. This product is unplated and not coated, and is used primarily in the manufacturing of office paper clips. It qualifies under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Low Carbon Flat Wire for Brush Filaments

Non-alloy steel flat wire with a thickness under 0.25 mm, low carbon content, and unplated surface. This product is designed for industrial brush making, where filaments require flexibility and durability. It is classified under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Medical Device Spring Flat Wire 0.55 mm

Ultra-clean low-carbon flat wire, 0.55 mm thick, for medical springs, uncoated or polished only. It is a non-alloy steel product classified under tariff item 7217.10.00 as not plated or coated wire.

Nonalloy Flat Wire for Staple Production

Ultra-thin flat steel wire under 0.25 mm in thickness, made from non-alloy steel with low carbon content. This product is uncoated and suitable for high-speed manufacturing of stapler staples. It falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Non-Plated Flat Steel Wire for Zipper Teeth

Low-carbon non-alloy flat wire with a thickness of 0.25 mm or less, uncoated and precision-formed for use in zipper slider teeth. This product is not plated or coated, and is classified under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thin gauge allows for interlocking without additional surface treatments.

Packaging Strap Base Flat Wire 1.25 mm

Low-carbon flat wire, 1.25 mm thick and 10 mm wide, for steel strapping base, uncoated. It is a non-alloy steel product classified under tariff item 7217.10.00 as not plated or coated wire.

Polished Flat Wire for Electrical Contacts

Thin polished flat wire made from low-carbon non-alloy steel, with a thickness not exceeding 0.25 mm. This product is not plated, and is used for stamping into small electrical connectors. It falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.

Precision 0.3 mm Shim Stock Flat Wire

Ultra-precise low-carbon flat wire, 0.3 mm thick and 25 mm wide, uncoated for shim stock in machinery. It is a non-alloy steel product classified under tariff item 7217.10.00 as not plated or coated wire.

Precision Flat Low-Carbon Wire for Binding Coils

Flat non-alloy steel wire with a thickness not exceeding 0.25 mm, low carbon content, and unplated surface. This product is used in the production of spiral notebook binding coils. It meets the criteria for tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Shaped Low Carbon Flat Wire 0.9 mm

Slightly shaped (non-circular) flat wire, 0.9 mm thick, made of non-alloy steel with less than 0.25% carbon, uncoated for hoses. It is classified under tariff item 7217.10.00 as not plated or coated wire.

Uncoated Flat Steel Shim Stock Wire

Thin flat wire of low-carbon non-alloy steel, with a thickness not exceeding 0.25 mm, not plated or coated. This product is used as precision shim stock in machinery alignment. It falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.

Class 1 Galvanized Low Carbon Utility Wire 4mm

This is a 4 mm round low carbon steel wire, heavily coated with zinc through a Class 1 galvanizing process. It is used for general utility and craft applications. It falls under tariff item 7217.20.00 because it is a wire of non-alloy steel, plated or coated with zinc, with a diameter exceeding 1.5 mm and a carbon content below 0.25%.

Class 1 Galvanized Wire Rope Core Wire

This is a high-tensile round non-alloy steel wire, zinc-coated, used as a strand core in wire rope manufacturing. It is a single wire with a Class 1 zinc coating, distinct from finished stranded products. It falls under tariff item 7217.20.00 as a zinc-coated non-alloy steel wire, with a diameter over 1.5 mm and low carbon content.

Electro-Galvanized Fine Wire 22 Gauge

This is a thin round iron or non-alloy steel wire with an electrolytic zinc coating, used for precision applications like mesh weaving. The electro-galvanizing process yields a uniform thin coating. It falls under tariff item 7217.20.00 as a zinc-plated non-alloy steel wire, with a diameter of 22 gauge (approximately 0.64 mm) and low carbon content.

Electro-Galvanized Low Carbon Steel Bale Wire

This is a 2.2 mm round low carbon steel wire, electro-galvanized with zinc for corrosion resistance. It is specifically used for securing hay and straw bales, with a smooth finish suitable for automatic baling machines. It falls under tariff item 7217.20.00 as a zinc-plated non-alloy steel wire with a diameter over 1.5 mm and low carbon content.

Electro-Galvanized Low Carbon Steel Staple Wire 0.5mm

0.5 mm diameter round wire, electro-zinc coated, with less than 0.25% carbon, supplied for staple production in office and upholstery applications. The fine gauge and low carbon content make it suitable for precise forming, and it falls under tariff item 7217.20.00.

Fine Galvanized Flat Edging Wire

Fine gauge zinc-plated flat wire of non-alloy steel, measuring 0.15 mm by 0.8 mm, used for decorative metal edging and trim. The zinc coating allows bending without cracking, and the flat profile is characteristic of wire under this tariff item.

Fine Galvanized Low Carbon Steel Wire 0.95mm

Near-limit 0.95 mm round zinc wire with less than 0.25% carbon, used for specialty binding applications. The fine diameter and zinc coating provide corrosion resistance and flexibility, qualifying it under tariff item 7217.20.00.

Galfan Coated Low Carbon Steel Wire 2.7mm

This is a 2.7 mm round low carbon steel wire coated with Galfan, a zinc-aluminum alloy, for enhanced corrosion resistance in long-life fencing. It is classified under tariff item 7217.20.00 because the Galfan coating is considered a zinc coating for tariff purposes, and the wire is of non-alloy steel with a diameter over 1.5 mm.

Galvanized Annealed Low Carbon Binding Wire

This is a 2 mm diameter soft annealed low carbon steel wire, galvanized with zinc for corrosion resistance. It is used for binding and packaging applications, where its flexibility is enhanced by the annealing process. It falls under tariff item 7217.20.00 as a round zinc-coated non-alloy steel wire with low carbon content and sufficient diameter.

Galvanized Flat Weaving Wire

Flat zinc-coated non-alloy steel wire, 0.6 mm by 2.5 mm, designed for power loom weaving into industrial filter screens and meshes. The flat cross-section optimizes weaving, and the zinc coating provides corrosion resistance.

Galvanized Flat Wire for Agricultural Tying

Heavy-duty zinc-plated flat wire (1.2 mm by 5 mm) of non-alloy steel for tying tomato stakes, vineyard wires, and crop supports. The zinc coating withstands soil contact and outdoor exposure, and the flat profile provides a secure grip.

Galvanized Flat Wire for Brush Making

Thin galvanized flat wire of iron or non-alloy steel, approximately 0.3 mm thick by 2 mm wide, used as bristle material in industrial wire brushes. The zinc coating provides corrosion resistance, and the flat profile is suited for brush manufacturing.

Galvanized Flat Wire for Cable Armor

Profiled zinc-coated flat wire (0.7 mm by 3.2 mm) of non-alloy steel, interlocked to form flexible cable armor protection. The zinc coating provides corrosion resistance, and the flat profile allows interlocking without cracking.

Galvanized Flat Wire for Filter Media

Fine zinc-coated flat non-alloy steel wire (0.25 mm by 1.8 mm) for crimped filter media in air handling units and HVAC systems. The flat profile maximizes surface area in pleated filters, and the zinc coating provides corrosion resistance.

Galvanized Low Carbon Micro-Tie Wire 0.1mm

0.1 mm extreme fine wire, galvanized, with low carbon content, used for micro-applications such as fine mesh or precision instruments. The ultra-fine diameter and zinc coating make it suitable for delicate tasks, and it falls under tariff item 7217.20.00.

Galvanized Low Carbon Steel Binding Wire 0.8mm

Round galvanized wire with a diameter of 0.8 mm, containing less than 0.25% carbon, used for binding rebar in construction and securing materials. The zinc coating provides corrosion resistance, and it is classified under tariff item 7217.20.00.

Galvanized Low Carbon Steel Chain Link Fence Wire

This is a 2.0 mm galvanized low carbon steel wire, specifically produced for weaving into chain link fencing. It is supplied as a basic round wire before the weaving process, with a zinc coating for corrosion resistance. It falls under tariff item 7217.20.00 as a zinc-coated non-alloy steel wire with a diameter over 1.5 mm and low carbon content.

Galvanized Low Carbon Steel Craft Wire 0.6mm

Fine round galvanized wire, 0.6 mm diameter with less than 0.25% carbon, used in floral arrangements, crafting, and jewelry wrapping. The zinc coating provides rust protection for indoor and outdoor use, fitting tariff item 7217.20.00.

Galvanized Low Carbon Steel Fence Wire

This is a 2.5 mm round galvanized low carbon steel wire, used for fencing and agricultural enclosures. It contains less than 0.25% carbon and is coated with zinc for corrosion resistance. It falls under tariff item 7217.20.00 as a zinc-coated non-alloy steel wire meeting the specified diameter and carbon content.