Electro-Galvanized Low Carbon Steel Bale Wire
This is a 2.2 mm round low carbon steel wire, electro-galvanized with zinc for corrosion resistance. It is specifically used for securing hay and straw bales, with a smooth finish suitable for automatic baling machines. It falls under tariff item 7217.20.00 as a zinc-plated non-alloy steel wire with a diameter over 1.5 mm and low carbon content.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wire is not zinc-coated
This covers uncoated wire of iron or non-alloy steel, which may be used for similar baling applications.
If the wire is coated with a material other than zinc
This covers wire plated or coated with materials such as plastics or other non-metals.
If the wire is replaced by synthetic twine for baling
This covers twine, cordage, and rope of other synthetic materials, which are non-steel alternatives.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the wire diameter is over 1.5 mm and the carbon content is below 0.25% to meet the tariff item's specifications
• The electro-galvanized coating should be uniform; include coating weight documentation in your import paperwork
• Check if the bale wire qualifies for a preferential tariff rate under a free trade agreement, such as CUSMA, if originating from a partner country
Related Products under Tariff item 7217.20.00
Class 1 Galvanized Low Carbon Utility Wire 4mm
This is a 4 mm round low carbon steel wire, heavily coated with zinc through a Class 1 galvanizing process. It is used for general utility and craft applications. It falls under tariff item 7217.20.00 because it is a wire of non-alloy steel, plated or coated with zinc, with a diameter exceeding 1.5 mm and a carbon content below 0.25%.
Class 1 Galvanized Wire Rope Core Wire
This is a high-tensile round non-alloy steel wire, zinc-coated, used as a strand core in wire rope manufacturing. It is a single wire with a Class 1 zinc coating, distinct from finished stranded products. It falls under tariff item 7217.20.00 as a zinc-coated non-alloy steel wire, with a diameter over 1.5 mm and low carbon content.
Electro-Galvanized Fine Wire 22 Gauge
This is a thin round iron or non-alloy steel wire with an electrolytic zinc coating, used for precision applications like mesh weaving. The electro-galvanizing process yields a uniform thin coating. It falls under tariff item 7217.20.00 as a zinc-plated non-alloy steel wire, with a diameter of 22 gauge (approximately 0.64 mm) and low carbon content.
Electro-Galvanized Low Carbon Steel Staple Wire 0.5mm
0.5 mm diameter round wire, electro-zinc coated, with less than 0.25% carbon, supplied for staple production in office and upholstery applications. The fine gauge and low carbon content make it suitable for precise forming, and it falls under tariff item 7217.20.00.
Fine Galvanized Flat Edging Wire
Fine gauge zinc-plated flat wire of non-alloy steel, measuring 0.15 mm by 0.8 mm, used for decorative metal edging and trim. The zinc coating allows bending without cracking, and the flat profile is characteristic of wire under this tariff item.
Fine Galvanized Low Carbon Steel Wire 0.95mm
Near-limit 0.95 mm round zinc wire with less than 0.25% carbon, used for specialty binding applications. The fine diameter and zinc coating provide corrosion resistance and flexibility, qualifying it under tariff item 7217.20.00.