0.9mm Industrial Binding Wire
This is a 0.9mm diameter round low carbon steel wire, not plated, used for concrete reinforcement tying and packaging bundling. It meets strict specifications of less than 0.25% carbon and is supplied in straight lengths or soft coils. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wire is plated or coated with zinc
Galvanized wire is classified under subheading 7217.20, not 7217.10.
If the wire is formed into specific articles like hooks or rings
Articles of iron or steel wire are classified under heading 73.26.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• If the wire is used for concrete reinforcement, ensure it complies with any applicable Canadian construction standards
• For packaging bundling, verify that the wire is not considered a part of general use under Section Note 2, which would affect classification
• Keep records of the wire's carbon content and diameter to support the tariff classification
Related Products under Tariff item 7217.10.00
0.35 mm Filter Screen Flat Wire
Fine low-carbon non-alloy flat wire with a thickness of 0.35 mm, used for industrial filter screens, with no coatings. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is still within the scope of this tariff item.
0.4 mm Battery Tab Flat Steel Wire
Flat low-carbon non-alloy wire with dimensions of 0.4 mm by 4 mm, uncoated, used for lithium battery tabs. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.
0.4mm Medical Device Wire
This is a precision 0.4mm diameter wire made of low carbon, non-alloy steel, with a bare, unplated surface. It is used in medical devices such as guidewires, stents, and surgical instruments, where exact tolerances are required for subsequent biocompatible processing. The product falls under tariff item 7217.10.00 because it is wire of iron or non-alloy steel that is not plated or coated, whether or not polished.
0.5mm Annealed Low Carbon Wire
This is a 0.5mm diameter, soft annealed round wire made of low carbon, non-alloy steel with less than 0.25% carbon. It is not plated or coated, and the annealing process softens the wire for better formability in applications like electronics harnesses and jewelry making. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.
0.5 mm Thick Spring Flat Wire
Uncoated flat wire of low-carbon non-alloy steel, with a thickness of 0.5 mm and a width of 8 mm, used in flat springs and fasteners. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.
0.6mm Electronics Harness Wire
This is an ultra-fine 0.6mm diameter round wire made of low carbon, non-alloy steel, with a bare, non-plated surface. It is used for wiring harnesses in consumer electronics and automotive sensors, where subsequent insulation is applied. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.