Industrial Low-Carbon Flat Annealed Wire
Industrial low-carbon flat annealed wire of non-alloy steel, with a carbon content below 0.25% and a thickness not exceeding 0.25 mm. This product is not plated or coated, and may be polished, making it suitable for flexible industrial tying applications. It falls under tariff item 7217.10.00 as wire of iron or non-alloy steel, not plated or coated.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wire is plated or coated with another metal
This alternative covers wire of iron or non-alloy steel that has been plated or coated, which is excluded from the current item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the wire's carbon content is below 0.25% and thickness does not exceed 0.25 mm to qualify for this tariff item
• Declare the product as wire of non-alloy steel, not plated or coated, and provide a mill test certificate to support the chemical composition
• Verify with the CBSA that the product is not considered a part of general use under Section Note 2
Related Products under Tariff item 7217.10.00
0.35 mm Filter Screen Flat Wire
Fine low-carbon non-alloy flat wire with a thickness of 0.35 mm, used for industrial filter screens, with no coatings. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is still within the scope of this tariff item.
0.4 mm Battery Tab Flat Steel Wire
Flat low-carbon non-alloy wire with dimensions of 0.4 mm by 4 mm, uncoated, used for lithium battery tabs. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.
0.4mm Medical Device Wire
This is a precision 0.4mm diameter wire made of low carbon, non-alloy steel, with a bare, unplated surface. It is used in medical devices such as guidewires, stents, and surgical instruments, where exact tolerances are required for subsequent biocompatible processing. The product falls under tariff item 7217.10.00 because it is wire of iron or non-alloy steel that is not plated or coated, whether or not polished.
0.5mm Annealed Low Carbon Wire
This is a 0.5mm diameter, soft annealed round wire made of low carbon, non-alloy steel with less than 0.25% carbon. It is not plated or coated, and the annealing process softens the wire for better formability in applications like electronics harnesses and jewelry making. It is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.
0.5 mm Thick Spring Flat Wire
Uncoated flat wire of low-carbon non-alloy steel, with a thickness of 0.5 mm and a width of 8 mm, used in flat springs and fasteners. This product is not plated or coated, and falls under tariff item 7217.10.00 as wire of iron or non-alloy steel. The thickness exceeds 0.25 mm but is within the scope of this tariff item.
0.6mm Electronics Harness Wire
This is an ultra-fine 0.6mm diameter round wire made of low carbon, non-alloy steel, with a bare, non-plated surface. It is used for wiring harnesses in consumer electronics and automotive sensors, where subsequent insulation is applied. The product is classified under 7217.10.00 as wire of iron or non-alloy steel, not plated or coated, whether or not polished.