Beech Wood Drawer Sides Blanks
Planed beech blanks sawn to 12 mm x 100 mm x 400 mm for flat-pack drawer sides. Sanded surfaces ready for CNC machining, they remain unfinished sawn wood under tariff item 4407.92.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the blanks are machined with joints or profiles
Machined wood parts for furniture may be classified as builders' joinery.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm that the blanks are not yet machined into finished drawer sides
• Keep records of the dimensions and processing stage
• Verify if any additional treatments affect the tariff classification
Related Products under Tariff item 4407.92.00
Beech Cabinet Door Blanks
Oversized sawn beech panels, 18 mm thick, sanded smooth and pre-cut to rectangular stock for raised panel door blanks. They are not yet profiled or fabricated into finished articles, so they remain classified as sawn wood of beech under tariff item 4407.92.00.
Beech End-Jointed Stair Treads
Beech stair treads sawn to 36 mm thickness, end-jointed for seamless lengths. They are planed and sanded but not yet fabricated into finished joinery, so they qualify as sawn wood of beech under tariff item 4407.92.00.
Beech Furniture Panel Blanks
Large format sawn beech panels, 22 mm thick, sanded to 150 grit for lamination prep. They are used for table tops and bed headboards but remain unfinished sawn wood, falling under tariff item 4407.92.00.
Beech Sawn Lumber 1x6 Boards
Kiln-dried beech lumber sawn lengthwise into 1-inch by 6-inch boards, planed and sanded for smooth finish. With thickness exceeding 6 mm, it is classified as sawn wood of beech under tariff item 4407.92.00.
Beech Sliced Wall Panelling
Longitudinally sliced beech sheets, 10 mm thick, sanded for interior wall cladding blanks. Exceeding the 6 mm veneer limit, they qualify as sawn wood of beech under tariff item 4407.92.00.
Beech Wood Shelf Boards
Planed beech shelving stock, 20 mm x 200 mm wide, sawn lengths for retail fixture blanks. Smooth sanded and ready for edge banding, they are classified as sawn wood of beech under tariff item 4407.92.00.