Of beech (Fagus spp.)
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. > Other: > Of beech (Fagus spp.) > Of beech (Fagus spp.)
Duty Rate (from China)
Subheadings
Products classified under Tariff item 4407.92
Beech Cabinet Door Blanks
Oversized sawn beech panels, 18 mm thick, sanded smooth and pre-cut to rectangular stock for raised panel door blanks. They remain basic sawn wood awaiting further profiling, so they fall under tariff item 4407.92.00 as beech wood sawn lengthwise, exceeding 6 mm in thickness.
4407.92.00Beech End-Jointed Stair Treads
Beech stair treads sawn to 36 mm thickness and end-jointed for seamless lengths. They are planed and sanded but not yet fabricated into joinery, so they qualify as sawn beech wood under tariff item 4407.92.00.
4407.92.00Beech Furniture Panel Blanks
Large-format sawn beech panels, 22 mm thick, sanded to 150 grit for lamination prep. They are basic sawn wood, not yet made into furniture, so they fall under tariff item 4407.92.00 as beech wood exceeding 6 mm thickness.
4407.92.00Beech Sawn Lumber 1x6 Boards
Kiln-dried beech lumber sawn into 1-inch by 6-inch boards, planed and sanded for a smooth finish. With thickness exceeding 6 mm, these boards are classified under tariff item 4407.92.00 as sawn beech wood.
4407.92.00Beech Sliced Wall Panelling
Longitudinally sliced beech sheets, 10 mm thick, sanded for interior wall cladding blanks. Since they exceed the 6 mm veneer limit, they are classified as sawn wood under tariff item 4407.92.00.
4407.92.00Beech Wood Drawer Sides Blanks
Planed beech blanks sawn to 12 mm x 100 mm x 400 mm for flat-pack drawer sides. They are unfinished sawn beech, sanded and ready for CNC machining, so they fall under tariff item 4407.92.00.
4407.92.00Beech Wood Shelf Boards
Planed beech shelving stock, 20 mm thick and 200 mm wide, sawn to lengths for retail fixture blanks. Smooth sanded and ready for edge banding, these boards are classified under tariff item 4407.92.00 as sawn beech wood.
4407.92.00Beech Wood Turning Blanks
Square sawn beech blocks, 100 mm thick, kiln-dried and wax-sealed for lathe turning into table legs. As basic sawn stock exceeding 6 mm, they fall under tariff item 4407.92.00.
4407.92.00European Beech Joinery Lumber
Fagus sylvatica lumber sawn 25 mm thick, end-matched for door/window joinery. Planed and sanded but still basic sawn wood stock, it is classified under tariff item 4407.92.00.
4407.92.00Fagus Beech Construction Lumber
Structural grade Fagus beech 2x8 joists sawn over 6 mm thick, planed for timber framing. Kiln-dried to strength specifications, these joists are classified under tariff item 4407.92.00 as sawn beech wood.
4407.92.00Fagus Beech Decking Boards
Sawn Fagus beech boards, 28 mm thick, with planed faces for outdoor decking substrates. Treated for dimensional stability, these boards exceed 6 mm and are classified under tariff item 4407.92.00.
4407.92.00Kiln-Dried Beech Panel Stock
Sliced beech panels, 15 mm thick, kiln-dried to 8% moisture content and sanded for cabinetry blanks. Exceeding 6 mm, they are classified under tariff item 4407.92.00 as sawn or peeled beech wood.
4407.92.00Planed Beech Moulding Stock
S4S (surfaced four sides) beech boards, 19x89 mm, for custom crown moulding blanks. Exceeding 6 mm thickness and remaining unfinished profile stock, they are classified under tariff item 4407.92.00.
4407.92.00Planed Beech Timber Beams
Rough-sawn beech logs converted into planed structural beams exceeding 6 mm thick, sourced from Fagus sylvatica. End-jointed for stability, these beams are classified under tariff item 4407.92.00 as sawn or planed beech wood.
4407.92.00Sanded Beech Flooring Planks
Select-grade beech wood planks sawn lengthwise, sanded smooth, 19 mm thick for tongue-and-groove flooring installation. As unfinished sawn beech exceeding 6 mm, they are classified under tariff item 4407.92.00.