Chapter 4407 — Customs Tariff Headings
Products classified under Tariff item 44.07
Creosote Pine Railroad Ties
Creosote pine railroad ties are heavy-duty crossties sawn to standard railroad dimensions and pressure-treated with creosote for rot resistance. These ties exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood treated with creosote.
4407.11.00Creosote-Treated Pine Poles
Creosote-treated pine poles are round utility poles, sawn and turned, pressure-treated with creosote for electrical line support. These poles exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood treated with creosote.
4407.11.00Eastern White Pine Decking 5/4x6
5/4 thickness decking boards from Eastern white pine, planed with eased edges, sawn lengthwise over 6 mm, untreated for porch applications. These boards are planed but not otherwise processed beyond what is typical for decking. They are classified under tariff item 4407.11.00 as pine wood sawn lengthwise, whether or not planed, of a thickness exceeding 6 mm.
4407.11.00Eastern White Pine Fence Boards
Sawn fence pickets from Eastern white pine, planed flat, exceeding 6 mm in thickness, untreated. These pickets are planed but not otherwise processed. They are classified under tariff item 4407.11.00 as pine wood sawn lengthwise, whether or not planed, of a thickness exceeding 6 mm.
4407.11.00Eastern White Pine Lumber 2x4
Sawn lumber from Eastern white pine (Pinus strobus), measuring 1.5 inches thick by 3.5 inches wide by various lengths exceeding 6 mm thickness, planed and sanded for smoothness. This coniferous wood is sawn lengthwise and further processed by planing and sanding. It is classified under tariff item 4407.11.00 as pine wood sawn lengthwise, whether or not planed or sanded, of a thickness exceeding 6 mm.
4407.11.00Eastern White Pine Rough Beams 6x8
Large rough sawn beams from Eastern white pine (Pinus strobus), measuring 5.5x7.25 inches by 20 feet long, with a thickness well over 6 mm. These untreated coniferous beams are sawn lengthwise without planing, sanding, or end-jointing, making them suitable for structural timber framing. They fall under tariff item 4407.11.00 as pine wood sawn or chipped lengthwise, of a thickness exceeding 6 mm.
4407.11.00Eastern White Pine Rough Lumber 2x4
Rough sawn lumber from Eastern white pine (Pinus strobus), measuring 1.5 inches thick by 3.5 inches wide by 8 feet long, exceeding 6 mm in thickness. This coniferous wood is sawn lengthwise without planing, sanding, or end-jointing, and is untreated. It is classified under tariff item 4407.11.00 as pine wood sawn lengthwise, of a thickness exceeding 6 mm.
4407.11.00Eastern White Pine Rough Timbers 4x4
Heavy rough sawn timbers of Eastern white pine (Pinus strobus), with a 3.5x3.5 inches cross-section by 12 feet length, thickness exceeding 6 mm. These untreated coniferous timbers are sawn lengthwise without further processing. They are classified under tariff item 4407.11.00 as pine wood sawn or chipped lengthwise, of a thickness exceeding 6 mm.
4407.11.00Finger-Jointed Loblolly Pine 4x4 Posts
4x4 finger-jointed posts from Pinus taeda (loblolly pine) for fencing and structural posts, sawn lengthwise exceeding 6 mm. These posts are classified as coniferous pine wood under this tariff item.
4407.11.00Finger-Jointed Lodgepole Pine Framing Lumber
Finger-jointed lumber from Pinus contorta (lodgepole pine) for residential framing, sawn to exceed 6 mm thickness and end-jointed. This lumber is classified as coniferous pine wood under this tariff item.
4407.11.00Finger-Jointed Monterey Pine Trim Boards
Premium finger-jointed trim boards from Pinus radiata (Monterey pine), sanded and planed for interior molding. These boards exceed 6 mm in thickness and are classified as coniferous pine wood under this tariff item.
4407.11.00Finger-Jointed Pine Lumber 2x4
Finger-jointed pine lumber measuring 2 inches by 4 inches by various lengths, made from Pinus spp. sawn lengthwise and end-jointed for structural strength. This lumber exceeds 6 mm in thickness and is classified under this tariff item.
4407.11.00Finger-Jointed Pine Studs 2x6
Structural finger-jointed pine studs in 2x6 dimensions from Pinus radiata, sawn lengthwise, planed, and end-jointed for framing applications. These studs exceed 6 mm in thickness and are classified under this tariff item.
4407.11.00Finger-Jointed Ponderosa Pine S4S Boards
Finger-jointed ponderosa pine boards, surfaced on four sides (S4S), are ideal for cabinetry and furniture stock. These boards exceed 6 mm in thickness and are made from Pinus ponderosa, a coniferous species. They are classified under tariff item 4407.11.00 as sawn pine wood that has been planed and end-jointed.
4407.11.00Finger-Jointed Radiata Pine Boards 1x8
Finger-jointed radiata pine boards, planed and sanded, measure 1 inch by 8 inches and are used for paneling and trim. These boards are made from Pinus radiata, a coniferous pine species, and exceed 6 mm in thickness. They are classified under tariff item 4407.11.00 as sawn pine wood with end-joints.
4407.11.00Finger-Jointed Scots Pine Construction Lumber
Finger-jointed Scots pine construction lumber is sawn for beams and rafters, with a thickness exceeding 6 mm. Made from Pinus sylvestris, this coniferous pine lumber is end-jointed for structural use. It is classified under tariff item 4407.11.00 as sawn pine wood.
4407.11.00Finger-Jointed Slash Pine Deck Joists
Finger-jointed slash pine deck joists are sawn lengthwise for outdoor decking, with a thickness exceeding 6 mm. Made from Pinus elliottii, this coniferous pine lumber is end-jointed for structural support. It is classified under tariff item 4407.11.00 as sawn pine wood.
4407.11.00Finger-Jointed White Pine Shelving Planks
Finger-jointed white pine shelving planks are made from eastern white pine (Pinus strobus) for ready-to-assemble shelving. These planks exceed 6 mm in thickness and are end-jointed for stability. They are classified under tariff item 4407.11.00 as sawn pine wood.
4407.11.00Kiln-Dried Pine Planks
Kiln-dried pine planks sawn lengthwise from Pinus radiata, with a sanded surface and a thickness exceeding 6 mm. These planks are used for flooring underlayment and meet the definition of coniferous pine wood under this tariff item.
4407.11.00Loblolly Pine Studs
Loblolly pine (Pinus taeda) studs sawn lengthwise, end-jointed, and kiln-dried for framing. These 2x4 studs exceed 6 mm in thickness and are classified as coniferous pine lumber under this tariff item.
4407.11.00Mixed Eastern White and Red Pine Rough Lumber
Bundled rough sawn lumber mixing Eastern white pine (Pinus strobus) and red pine (Pinus resinosa), with average 2x6 dimensions over 6 mm thick. This untreated coniferous wood is sawn lengthwise without planing or sanding. It is classified under tariff item 4407.11.00 as pine wood sawn lengthwise, of a thickness exceeding 6 mm, since both species are of the genus Pinus.
4407.11.00Painted Pine Joist Lumber
Painted pine joist lumber features engineered pine joists with painted ends for moisture protection, sawn lengthwise and exceeding 6 mm in thickness. These joists are made from coniferous pine and used in floor and ceiling construction. They are classified under tariff item 4407.11.00 as sawn pine wood with paint treatment.
4407.11.00Painted Pine Lumber 2x4
Painted pine lumber 2x4 is sawn pine measuring 2 inches by 4 inches by 8 feet, planed and treated with exterior paint for weather protection. This lumber exceeds 6 mm in thickness and is made from coniferous pine. It is classified under tariff item 4407.11.00 as sawn pine wood with paint treatment.
4407.11.00Painted Pine Siding Boards
Painted pine siding boards are shiplap planks pre-painted with primer and topcoat for exterior walls, with a thickness of 3/4 inch. These boards exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with paint treatment.
4407.11.00Pine Sawn Finger-Jointed Lumber
Generic Pinus spp. pine sawn boards, finger-jointed for length and planed smooth, with 2x6 dimensions. These boards exceed 6 mm in thickness and are classified as coniferous pine wood sawn lengthwise under this tariff item.
4407.11.00Pine Sliced Veneer Backing Sheets
Pine wood sliced into thick sheets exceeding 6 mm for veneer backing, sawn lengthwise from Pinus logs. These sheets are classified as coniferous pine wood sawn or sliced under this tariff item.
4407.11.00Planed Pine Stair Treads
Pine stair treads sawn and planed to 1-1/8 inch thickness from Pinus spp. These treads exceed 6 mm and are classified as planed coniferous pine wood under this tariff item.
4407.11.00Ponderosa Pine Decking
Ponderosa pine (Pinus ponderosa) decking boards, 5/4 x 6 inch, planed and sanded, sawn lengthwise. These boards exceed 6 mm in thickness and are classified as coniferous pine wood under this tariff item.
4407.11.00Preservative-Treated Pine Beams
Preservative-treated pine beams are dimensional beams measuring 6x8 inches, treated with micronized copper azole preservative and sanded. These beams exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with preservative treatment.
4407.11.00Pressure-Treated Pine Fencing Boards
Pressure-treated pine fencing boards are sanded fence pickets measuring 1x6x8 feet, treated with waterborne preservative for ground contact durability. These boards exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with preservative treatment.
4407.11.00Radiata Pine Lumber 2x4
Sawn radiata pine (Pinus radiata) boards measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural use. These boards exceed 6 mm in thickness and are classified as coniferous pine wood under this tariff item.
4407.11.00Red Pine Rough Planks 2x10
Rough sawn red pine (Pinus resinosa) planks, measuring 1.75 inches thick by 9.25 inches wide by 16 feet, exceeding 6 mm in thickness. These untreated coniferous softwood planks are sawn lengthwise without planing or sanding. They are classified under tariff item 4407.11.00 as pine wood sawn lengthwise, of a thickness exceeding 6 mm.
4407.11.00Red Pine Rough Sawn Boards 1x6
Rough 1-inch by 6-inch boards from red pine (Pinus resinosa), sawn lengthwise with thickness over 6 mm, untreated and not planed. These coniferous boards are used in various construction applications. They are classified under tariff item 4407.11.00 as pine wood sawn lengthwise, of a thickness exceeding 6 mm.
4407.11.00Red Pine Rough Studs 2x4x92-5/8
Pre-cut length rough red pine (Pinus resinosa) studs at 1.5x3.5x92-5/8 inches for wall framing, with thickness exceeding 6 mm. These untreated coniferous studs are sawn lengthwise without planing or sanding. They are classified under tariff item 4407.11.00 as pine wood sawn lengthwise, of a thickness exceeding 6 mm.
4407.11.00Scots Pine S4S Boards
Scots pine (Pinus sylvestris) lumber surfaced four sides (S4S), 1x6 inch profile, sliced lengthwise and sanded. This lumber exceeds 6 mm in thickness and is classified as coniferous pine wood under this tariff item.
4407.11.00Slash Pine Beams
Slash pine (Pinus elliottii) structural beams, 4x8 inch cross-section, sawn, planed, and end-jointed. These beams exceed 6 mm in thickness and are classified as coniferous pine wood under this tariff item.
4407.11.00Southern Yellow Pine 2x6
Southern yellow pine (Pinus spp. mixture) 2x6 joists, sawn lengthwise and kiln-dried to 19% moisture. These joists exceed 6 mm in thickness and are classified as coniferous pine wood under this tariff item.
4407.11.00Stained Pine Landscape Timbers
Stained pine landscape timbers are 4x4x8 feet timbers, end-jointed and stained with oil-based preservative for garden edging. These timbers exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with stain treatment.
4407.11.00Stain-Finished Pine Studs
Stain-finished pine studs are kiln-dried 2x4 studs, lightly stained for interior moisture resistance and planed all around. These studs exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with stain treatment.
4407.11.00Stain-Treated Pine Deck Boards
Stain-treated pine deck boards are planed decking boards measuring 5/4 x 6 inches, treated with penetrating wood stain for UV and moisture resistance. These boards exceed 6 mm in thickness and are made from coniferous pine. They are classified under tariff item 4407.11.00 as sawn pine wood with stain treatment.
4407.12.00Creosote Fir Railway Ties
Heavy-duty fir crossties sawn to standard 7x9x8.5 ft specifications and treated with creosote for railroad track underlayment. These ties are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous fir wood.
4407.12.00Creosote Spruce Guardrail Posts
Tapered spruce posts measuring 6x6x10 ft, treated with creosote for highway guardrail applications. These posts are made from Picea spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous spruce wood.
4407.12.00Creosote Treated Fir Deck Boards
Planed fir decking boards measuring 5/4 x 6 inches, pressure-treated with creosote for outdoor durability against rot and termites. These boards are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous fir wood.
4407.12.00End-Jointed Spruce Boards
End-jointed spruce boards, sawn lengthwise and planed or sanded, with a thickness of 20 mm, exceeding the 6 mm threshold. These boards are made from spruce (Picea spp.) and are used for trim, shelving, and furniture components.
4407.12.00Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 inch fir beam stock made from Abies spp., finger-jointed, sawn lengthwise, and planed, with thickness exceeding 6 mm. These beams are used for structural applications.
4407.12.00Finger-Jointed Fir Header Lumber 3x12
3x12 inch fir headers for door framing, finger-jointed from Abies spp., sawn with thickness exceeding 6 mm and planed. These headers are used in construction for structural support.
4407.12.00Finger-Jointed Fir Rafter Stock 4x12
4x12 inch fir rafter material, finger-jointed from Abies spp., planed with thickness exceeding 6 mm. These rafters are used in roof construction.
4407.12.00Finger-Jointed Fir Scaffold Plank 2x10
Heavy 2x10 inch fir planks for scaffolding, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These planks are used for temporary structures.
4407.12.00Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 inch dimensions with thickness over 6 mm, often kiln-dried and planed. These studs are used for wall framing.
4407.12.00Finger-Jointed Spruce Decking 5/4x6
Finger-jointed spruce decking boards, 5/4x6 inches, sawn lengthwise from Picea spp. and joined end-to-end for extended length. The boards exceed 6 mm in thickness and are classified under tariff item 4407.12.00 as coniferous sawn wood of spruce.
4407.12.00Finger-Jointed Spruce Framing Lumber 4x4
Square 4x4 posts sawn lengthwise from spruce (Picea spp.), finger-jointed for structural strength and planed smooth. With a thickness exceeding 6 mm, these posts are classified under tariff item 4407.12.00 as coniferous spruce lumber.
4407.12.00Finger-Jointed Spruce Joist Lumber 2x12
Finger-jointed spruce joists measuring 2x12 inches, sawn and planed from Picea spp. for use as floor joists. The thickness exceeds 6 mm, placing them under tariff item 4407.12.00 as coniferous spruce lumber.
4407.12.00Finger-Jointed Spruce Lumber 2x4
Dimensional spruce lumber measuring 2x4 inches, sawn lengthwise and finger-jointed for end-to-end strength. The boards are planed or sanded and exceed 6 mm in thickness, qualifying for tariff item 4407.12.00 as coniferous spruce wood.
4407.12.00Finger-Jointed Spruce S4S Lumber 2x10
S4S (surfaced four sides) spruce lumber measuring 2x10 inches, finger-jointed from Picea spp. for use as roof rafters. The boards are sawn and planed to a thickness exceeding 6 mm, classified under tariff item 4407.12.00 as coniferous spruce lumber.
4407.12.00Finger-Jointed Spruce Shelf Board 1x12
Spruce shelf boards measuring 1x12 inches, finger-jointed and sawn or sanded to a thickness exceeding 6 mm. These boards are made from Picea spp. and are classified under tariff item 4407.12.00 as coniferous spruce lumber.
4407.12.00Finger-Jointed Spruce Trim Boards 1x6
Spruce trim boards measuring 1x6 inches, finger-jointed and sawn lengthwise with a surfaced finish exceeding 6 mm in thickness. These boards are made from Picea spp. and are classified under tariff item 4407.12.00 as coniferous spruce lumber for interior trim applications.
4407.12.00Finger-Jointed Spruce Wall Panel Lumber 1x8
Spruce boards measuring 1x8 inches, finger-jointed from Picea spp. for use in wainscoting panels. The boards are sawn to a thickness exceeding 6 mm and are classified under tariff item 4407.12.00 as coniferous spruce lumber.
4407.12.00Fir Landscape Timbers Creosote Treated
Fir timbers measuring 8x8x8 ft, treated with creosote for use in raised garden beds and retaining walls. These timbers are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-preserved coniferous fir lumber.
4407.12.00Fir Sawn Decking Boards 5/4x6
Fir decking boards sawn to 5/4x6 inches (29 mm x 140 mm), sanded with eased edges but without tongue-and-groove profiling. These boards are made from fir (Abies spp.) and are used for exterior deck surfacing.
4407.12.00Fir Utility Poles Preservative Treated
Peeled and planed fir poles measuring 30-40 ft in length, treated with pentachlorophenol preservative for electrical utility lines. These poles are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as coniferous fir wood with preservative treatment.