Finger-Jointed Spruce Decking 5/4x6
Finger-jointed spruce decking boards, 5/4x6 inches, sawn lengthwise from Picea spp. and joined end-to-end for extended length. The boards exceed 6 mm in thickness and are classified under tariff item 4407.12.00 as coniferous sawn wood of spruce.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the decking is made of pine (Pinus spp.) instead of spruce
Pine is classified separately under coniferous sawn wood.
If the decking is continuously shaped along any of its edges, ends or faces
Continuously shaped wood is classified under heading 44.09.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the decking is properly marked with species (Picea spp.) and dimensions on the commercial invoice
• Verify that the finger-jointing does not alter the wood's classification as sawn lumber
• Be prepared to provide a certificate of origin if claiming preferential tariff treatment under a free trade agreement
Related Products under Tariff item 4407.12.00
Creosote Fir Railway Ties
Heavy-duty fir crossties sawn to standard 7x9x8.5 ft specifications and treated with creosote for railroad track underlayment. These ties are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous fir wood.
Creosote Spruce Guardrail Posts
Tapered spruce posts measuring 6x6x10 ft, treated with creosote for highway guardrail applications. These posts are made from Picea spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous spruce wood.
Creosote Treated Fir Deck Boards
Planed fir decking boards measuring 5/4 x 6 inches, pressure-treated with creosote for outdoor durability against rot and termites. These boards are made from Abies spp., exceed 6 mm in thickness, and are classified under tariff item 4407.12.00 as creosote-treated coniferous fir wood.
End-Jointed Spruce Boards
End-jointed spruce boards, sawn lengthwise and planed or sanded, with a thickness of 20 mm, exceeding the 6 mm threshold. These boards are made from spruce (Picea spp.) and are used for trim, shelving, and furniture components.
Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 inch fir beam stock made from Abies spp., finger-jointed, sawn lengthwise, and planed, with thickness exceeding 6 mm. These beams are used for structural applications.
Finger-Jointed Fir Header Lumber 3x12
3x12 inch fir headers for door framing, finger-jointed from Abies spp., sawn with thickness exceeding 6 mm and planed. These headers are used in construction for structural support.