Of fir (Abies spp.) and spruce (Picea spp.)
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like. > Of fir (Abies spp.) and spruce (Picea spp.)
Duty Rate (from China)
Products classified under Tariff item 4407.12
End-Jointed Spruce Boards
End-jointed spruce boards, sawn lengthwise from Picea spp., planed and sanded to a thickness exceeding 6 mm. These boards are used for trim, shelving, and furniture components, and are classified under tariff item 4407.12.00 as wood of spruce sawn or chipped lengthwise.
4407.12.00Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 fir beam stock from Abies spp., finger-jointed, sawn lengthwise, and planed, with thickness exceeding 6 mm for structural beams. These beams are classified under tariff item 4407.12.00 as fir sawn wood with finger-jointing.
4407.12.00Finger-Jointed Fir Header Lumber 3x12
3x12 fir headers for door framing, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These headers are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
4407.12.00Finger-Jointed Fir Rafter Stock 4x12
4x12 fir rafter material, finger-jointed from Abies spp., planed with thickness exceeding 6 mm. This material is used for roof rafters and is classified under tariff item 4407.12.00 as finger-jointed fir lumber.
4407.12.00Finger-Jointed Fir Scaffold Plank 2x10
Heavy 2x10 fir planks for scaffolding, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These planks are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
4407.12.00Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 dimensions with thickness over 6 mm, often kiln-dried and planed. These studs are classified under tariff item 4407.12.00 as finger-jointed fir wood.
4407.12.00Fir Sawn Decking Boards 5/4x6
Fir decking boards sawn to 5/4x6 inches (29 mm x 140 mm), sanded with eased edges but without tongue-groove profiling. These boards are basic sawn or planed fir wood, exceeding 6 mm in thickness, and are used for exterior deck surfacing.
4407.12.00Kiln-Dried Fir Studs 2x6
Kiln-dried fir studs in 2x6 size (38 mm x 140 mm), planed and end-jointed, with thickness exceeding 6 mm. These studs are used for wall framing in construction and are classified as processed fir sawn wood under tariff item 4407.12.00.
4407.12.00Planed Abies Fir Lumber 2x10
Sawn Abies fir lumber in 2x10 joist size (38 mm x 235 mm), planed on all four sides with a sanded finish, exceeding 6 mm in thickness. This lumber is essential for floor joists and rafters and falls under tariff item 4407.12.00 as fir sawn wood.
4407.12.00Planed Fir Beam 4x6
Sawn fir timber cut to 4x6 inch (89 mm x 140 mm) beam size, planed on all four sides and end-jointed for stability, with thickness well over 6 mm. These beams are used for structural support and are classified under tariff item 4407.12.00 as processed coniferous sawn wood of fir.
4407.12.00Sanded Spruce Planks 1x8
Lengthwise sawn spruce boards measuring 1x8 inches (19 mm x 184 mm), sanded for finish carpentry, with thickness exceeding 6 mm and no further profiling. These boards are pure spruce sawn wood, commonly used for paneling and trim, and fall under tariff item 4407.12.00.
4407.12.00Sawn Spruce Lumber 2x4
Kiln-dried spruce lumber sawn lengthwise to standard 2x4 dimensions (38 mm x 89 mm), planed and sanded for a smooth finish, with thickness exceeding 6 mm. This lumber is classified under tariff item 4407.12.00 as sawn coniferous wood of spruce.
4407.12.00Select Grade Fir Planks
Premium select structural Abies fir planks in 2x8 size, kiln-dried and surfaced on four sides, with a thickness of 38 mm. These high-grade planks are used for visible applications and joinery, and are classified under tariff item 4407.12.00 as fir sawn wood.
4407.12.00S-P-F Borderline Spruce Framing
Sawn spruce-dominant framing lumber in 2x4 size, planed and visually graded #2, with a thickness of 38 mm. While S-P-F is common, pure Picea identification qualifies this lumber for tariff item 4407.12.00 over mixed species classification.
4407.12.00Spruce Sawn Stair Treads
Picea spruce sawn treads cut to standard 1x11x36 inch dimensions, planed and sanded, with thickness exceeding 6 mm and no bullnose profiling. These treads are classified under tariff item 4407.12.00 as sawn spruce lumber before final shaping, for interior stair construction.