Kiln-Dried Fir Studs 2x6
Kiln-dried fir studs in 2x6 size (38 mm x 140 mm), planed and end-jointed, with thickness exceeding 6 mm. These studs are used for wall framing in construction and are classified as processed fir sawn wood under tariff item 4407.12.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the studs are from mixed S-P-F stands rather than pure fir.
Mixed species lumber is classified under a different tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the studs are properly kiln-dried to prevent moisture-related issues during customs inspection
• Have documentation proving the species is Abies spp
• Verify that end-jointing does not alter the classification
Related Products under Tariff item 4407.12.00
End-Jointed Spruce Boards
End-jointed spruce boards, sawn lengthwise from Picea spp., planed and sanded to a thickness exceeding 6 mm. These boards are used for trim, shelving, and furniture components, and are classified under tariff item 4407.12.00 as wood of spruce sawn or chipped lengthwise.
Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 fir beam stock from Abies spp., finger-jointed, sawn lengthwise, and planed, with thickness exceeding 6 mm for structural beams. These beams are classified under tariff item 4407.12.00 as fir sawn wood with finger-jointing.
Finger-Jointed Fir Header Lumber 3x12
3x12 fir headers for door framing, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These headers are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Rafter Stock 4x12
4x12 fir rafter material, finger-jointed from Abies spp., planed with thickness exceeding 6 mm. This material is used for roof rafters and is classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Scaffold Plank 2x10
Heavy 2x10 fir planks for scaffolding, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These planks are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 dimensions with thickness over 6 mm, often kiln-dried and planed. These studs are classified under tariff item 4407.12.00 as finger-jointed fir wood.