Planed Abies Fir Lumber 2x10
Sawn Abies fir lumber in 2x10 joist size (38 mm x 235 mm), planed on all four sides with a sanded finish, exceeding 6 mm in thickness. This lumber is essential for floor joists and rafters and falls under tariff item 4407.12.00 as fir sawn wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +25.0% | 25% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the lumber is from pine species instead of fir.
Pine lumber is classified separately from fir and spruce.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide a species certificate confirming Abies spp. to avoid misclassification
• Ensure the lumber is free from pests and diseases
• Keep records of the planing process to demonstrate it remains within the tariff scope
Related Products under Tariff item 4407.12.00
End-Jointed Spruce Boards
End-jointed spruce boards, sawn lengthwise from Picea spp., planed and sanded to a thickness exceeding 6 mm. These boards are used for trim, shelving, and furniture components, and are classified under tariff item 4407.12.00 as wood of spruce sawn or chipped lengthwise.
Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 fir beam stock from Abies spp., finger-jointed, sawn lengthwise, and planed, with thickness exceeding 6 mm for structural beams. These beams are classified under tariff item 4407.12.00 as fir sawn wood with finger-jointing.
Finger-Jointed Fir Header Lumber 3x12
3x12 fir headers for door framing, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These headers are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Rafter Stock 4x12
4x12 fir rafter material, finger-jointed from Abies spp., planed with thickness exceeding 6 mm. This material is used for roof rafters and is classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Scaffold Plank 2x10
Heavy 2x10 fir planks for scaffolding, finger-jointed from Abies spp., sawn and planed with thickness exceeding 6 mm. These planks are classified under tariff item 4407.12.00 as finger-jointed fir lumber.
Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 dimensions with thickness over 6 mm, often kiln-dried and planed. These studs are classified under tariff item 4407.12.00 as finger-jointed fir wood.