Beech Sliced Wall Panelling
Longitudinally sliced beech sheets, 10 mm thick, sanded for interior wall cladding blanks. Since they exceed the 6 mm veneer limit, they are classified as sawn wood under tariff item 4407.92.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheets are 6 mm or less in thickness
Veneer sheets of 6 mm or less are classified under heading 44.08.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the sheets are not surface-treated beyond sanding; varnished or painted panels may be classified elsewhere
• Confirm the thickness exceeds 6 mm to avoid classification as veneer under heading 44.08
• Provide the slicing method and species details for customs clearance
Related Products under Tariff item 4407.92.00
Beech Cabinet Door Blanks
Oversized sawn beech panels, 18 mm thick, sanded smooth and pre-cut to rectangular stock for raised panel door blanks. They remain basic sawn wood awaiting further profiling, so they fall under tariff item 4407.92.00 as beech wood sawn lengthwise, exceeding 6 mm in thickness.
Beech End-Jointed Stair Treads
Beech stair treads sawn to 36 mm thickness and end-jointed for seamless lengths. They are planed and sanded but not yet fabricated into joinery, so they qualify as sawn beech wood under tariff item 4407.92.00.
Beech Furniture Panel Blanks
Large-format sawn beech panels, 22 mm thick, sanded to 150 grit for lamination prep. They are basic sawn wood, not yet made into furniture, so they fall under tariff item 4407.92.00 as beech wood exceeding 6 mm thickness.
Beech Sawn Lumber 1x6 Boards
Kiln-dried beech lumber sawn into 1-inch by 6-inch boards, planed and sanded for a smooth finish. With thickness exceeding 6 mm, these boards are classified under tariff item 4407.92.00 as sawn beech wood.
Beech Wood Drawer Sides Blanks
Planed beech blanks sawn to 12 mm x 100 mm x 400 mm for flat-pack drawer sides. They are unfinished sawn beech, sanded and ready for CNC machining, so they fall under tariff item 4407.92.00.
Beech Wood Shelf Boards
Planed beech shelving stock, 20 mm thick and 200 mm wide, sawn to lengths for retail fixture blanks. Smooth sanded and ready for edge banding, these boards are classified under tariff item 4407.92.00 as sawn beech wood.